Tender For Repairing And Beautification Work Under The Strengthening Of Dr. Ram Manohar Lohia Park. (Electrical Work)
Tender Value
1.01 Crore
Estimated cost
Bid Submission
03 Dec 2026
25 days left
EMD
2.13 Lakhs
Bank guarantee accepted
Document Fee
7198
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Beautification Work Under The Strengthening Of Dr. Ram Manohar Lohia Park. (Electrical Work)
BOQ
| Sl. No. | Item Description |
| 1 | LT Main Distribution Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Cat. B. Pannel Cubicle Type Incoming 630 Amp. MCCB-1 No (Main LT Panel) 200 Amp.MCCB- 1 No ,100 Amp MCCB-1 No & 63 Amp.MCCB-5 Nos. |
| 2 | Incoming 200 Amp. MCCB-1 No, Outgoing 100 Amp. MCCB-1 No & 63 Amp. MCCB-3 Nos. |
| 3 | Incoming 100 Amp. MCCB-1 No, Outgoing 63 Amp. MCCB-1 No & 32 Amp. MCCB-2 Nos. |
| 4 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in Existing RCC / Hume / Metal / PVC Pipe as directed by the Engineer-Incharge, complete in all respect. Incuding excavation and refilling .The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 240 sq. mm 3-1/2 core |
| 5 | 120 sq. mm 3-1/2 core |
| 6 | 95 sq. mm 3-1/2 core |
| 7 | 70 sq. mm 3-1/2 core |
| 8 | 35 sq. mm 3-1/2 core |
| 9 | 25 sq. mm 3-1/2 core |
| 10 | 16 sq. mm 4 core |
| 11 | 10 sq. mm 2 core |
| 12 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 240 sq. mm 3-1/2 core |
| 13 | 120 sq. mm 3-1/2 core |
| 14 | 95 sq. mm 3-1/2 core |
| 15 | 70 sq. mm 3-1/2 core |
| 16 | 35 sq. mm 3-1/2 core |
| 17 | 25 sq. mm 3-1/2 core |
| 18 | 16 sq. mm 4 core |
| 19 | 10 sq. mm 2 core |
| 20 | Lighting Work and DB's Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 21 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 22 | 160 mm dia (OD-160 mm & ID-135 mm nominal) |
| 23 | Supplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 3 output(1output per phase) and suitable for three phase supply |
| 24 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 6 way (4 + 18), Double door |
| 25 | 8 way (4 + 24), Double door |
| 26 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 27 | Single pole and neutral |
| 28 | Triple pole and neutral |
| 29 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A |
| 30 | Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. |
| 31 | Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. |
| 32 | Supply and fixing of LED Street light Filting with mandatory driver set, having die cast aluminium body with toughend glass UV stabilized PC Cover and lenses suitable for 45 Watt. to 50 Watt, Confirming to IP 66, and TK07 and above protection having Company LOGO Engraved complete in all respect including |Labour. 5400-6000 system lumens, High Power LED with lenses, 120 Lm/W, PF>0.95, THD <10% at full load, CRI >70, Potled driver Set in Metal housing (NotCircuitory), Phase to Phase protection at 440V, >300V over voltage auto cut and restart feature. 4 KV inlermal Srge Protection, with 5 years warrantee CAT-AAA |
| 33 | Supply and fixing of LED Street light Filting with mandatory driver set, having die cast aluminium body with toughend glass UV stabilized PC Cover and lenses suitable for 110 Watt. to 130 Watt, Confirming to IP 66, and TK07 and above protection having Company LOGO Engraved complete in all respect including |Labour. 5400-6000 system lumens, High Power LED with lenses, 120 Lm/W, PF>0.95, THD <10% at full load, CRI >70, Potled driver Set in Metal housing (NotCircuitory), Phase to Phase protection at 440V, >300V over voltage auto cut and restart feature. 4 KV inlermal Srge Protection, with 5 years warrantee CAT-AAA |
| 34 | Supply and fixing of factory wited inlegal LED lood light luninaires with die cast aluminiun housing with toughend glas UV stabilized PC Cover and lenscs built with mandatory driver set suitable for fllowing Watt C'onfirming to lP 65/66, IK 07 and above protection complete in all 4800-6000 system lunens, High power LED with lenses, >120 ImW, PF 0.95, THID 0% at full load, CRI >70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & >l00V auto cut and re-start feature, 4 KV internal Surge Protetion, with 5 warrantee .170 to 200 watt CAT-AAA |
| 35 | Supply and fixing of LED Tube Light with heavy duty Metal Box type Tube Light fitting Ix22 watt suitable for upto Ix 22 watt LED Polycarbonete tube light complete Including tube suitable for both surface & suspended complete in all respect 2620 system lumens >120 Lm/W, PF >0.95, THD< 10%, CRI >80, sheet thickness min 0.8 mm, Tube with aluminiun heat sink, >300V over votlage protection, 2.5 KV internal Surge Protection, with 5 year watrantee. CAT-AAA |
| 36 | Earthing and protection Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 37 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 38 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 39 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 40 | Internal wiring Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group A |
| 41 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 42 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.Group A |
| 43 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 44 | 32 mm |
| 45 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm |
| 46 | 3 x 2.5 sq. mm |
| 47 | 4 x 4 sq. mm |
| 48 | 4 x 6 sq. mm |
| 49 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 200 mm X 150 mm X 60 mm deep |
| 50 | 200 mm X 300 mm X 60 mm deep |
| 51 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 52 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 53 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 54 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door |
| 55 | 8 way , Double door |
| 56 | PVC Cabne for LTDB'S 5 mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriate design shape and size as per manufacturer’s specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Non decorative type. |
| 57 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 58 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 59 | Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre). |
| 60 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm |
| 61 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm |
| 62 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 63 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge All kinds of soil |
| 64 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 65 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 3 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%). |
| 66 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) foundation including excavation and refilling etc. as required. |
| 67 | Non Schedule Decoretive Pole and Lights Supply & Fixing 4200mm Single Arm Pole made of circular mild steel pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.6mm thick & Top section 114.3mm Dia x 3.2mm thick Decorative Die cast Aluminium cone (230mm Dia x 150mm Height) covered on the both section joint area. Decorative base made of Gravity Die-cast aluminium (436mm Dia x 481mm Height). The single arm decorative bracket is a split constructed type, Bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, emerging from a Gravity Diecast Aluminium embellishment upto a length of 1808mm crowned at top. The artistically curved single arm made of MS pipe 38.1mm Dia x 2mm thick, spruced up with MS Scroll with gravity diecast aluminium floral and decorative embellishment, is firmly held to the stem by way of MS clamps and the arm bears cast iron knobs at one end and other ends facilitates the fitment of luminaire at 908mm on the vertical axis of the bracket stem. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope with IP protection rating. The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Mild steel mounting plate 250mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M20 x 500mm bolts of grade 4.6 at CC215. All dimension are within +/- 5% tolerance. Shot blasting process for surface preparation of pole before painting / powder coating. The pole is coated with zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options. complete with 50watt drop down fixture.Confirming to IP 66, and TK07 and above protection having Company LOGO Engraved complete in all respect including |Labour. 2800-3500 system lumens, High Power LED with lenses, ≥120 Lm/W, PF>0.95, THD <10% at full load, CRI >70, Potled driver Set in Metal housing (NotCircuitory), Phase to Phase protection at 440V, >300V over voltage auto cut and restart feature. 4 KV inlermal Srge Protection, with 5 years warrantee |
| 68 | Supply & Fixing 4200mm double Arm Pole made of circular mild steel pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.6mm thick & Top section 114.3mm Dia x 3.2mm thick Decorative Die cast Aluminium cone (230mm Dia x 150mm Height) covered on the both section joint area. Decorative base made of Gravity Die-cast aluminium (436mm Dia x 481mm Height). The single arm decorative bracket is a split constructed type, Bracket stem made of MS Pipe 60.3mm Dia x 2.6mm thick, emerging from a Gravity Diecast Aluminium embellishment upto a length of 1808mm crowned at top. The artistically curved single arm made of MS pipe 38.1mm Dia x 2mm thick, spruced up with MS Scroll with gravity diecast aluminium floral and decorative embellishment, is firmly held to the stem by way of MS clamps and the arm bears cast iron knobs at one end and other ends facilitates the fitment of luminaire at 908mm on the vertical axis of the bracket stem. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987. Pole section welded by certified welders using high end MIG welding processes. PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope with IP protection rating. The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Mild steel mounting plate 250mm Square x 12mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 38 x 19 to suit M20 x 500mm bolts of grade 4.6 at CC215. All dimension are within +/- 5% tolerance. Shot blasting process for surface preparation of pole before painting / powder coating. The pole is coated with zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options. complete with 50watt drop down fixture.Confirming to IP 66, and TK07 and above protection having Company LOGO Engraved complete in all respect including |Labour. 2800-3500 system lumens, High Power LED with lenses, ≥120 Lm/W, PF>0.95, THD <10% at full load, CRI >70, Potled driver Set in Metal housing (NotCircuitory), Phase to Phase protection at 440V, >300V over voltage auto cut and restart feature. 4 KV inlermal Srge Protection, with 5 years warrantee Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender