Tender For Construction Of Jamalpur To Anwa Link Road. (Including 05 Years Maintenance)
Tender Value
1.32 Crore
Estimated cost
Bid Submission
21 Nov 2026
13 days left
EMD
8.61 Lakhs
Bank guarantee accepted
Document Fee
4272
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Dehat → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Jamalpur To Anwa Link Road. (Including 05 Years Maintenance)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 (MORD 3.05 (iii) |
| 2 | Construction of embankment with approved material obtained from borrow pits with all lifts upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300.2 with lead up to 1000m as per technical specification clause 301.5 (MORD 3.04) |
| 3 | Providing, laying and spreading material on a prepared subgrade, adding cement @ 2% by weight to the spread material manually, mixing in place with Rotavator and compacting with the Road Roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. |
| 4 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density as per MORD specification 401. |
| 5 | Providing, laying and spreading material on a prepared subbase, cement @ 4% by weight to the spread material manually, mix in place with Rotavator and compacting with the Road Roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base / base. |
| 6 | Providing and applying tack coat with Bitumen (VG-10) using bitumen pressure distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MORD Technical Specification Clause 503. |
| 7 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per Technical Specification Clause 508. Case - II By Mechanical Means(HMP 30/40) (I) Bitumen VG-10 |
| 8 | Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 Case - III : Type C By Mechanical Means (HMP 30/40) (I) Bitumen VG-10 |
| 9 | Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. |
| 10 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (MORD 10.10 (iii) 200 m stone (precast) |
| 11 | Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (MORD 10.10 (ii) Ordinary Kilometer Stone (Precast) |
| 12 | Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701 (MORD 10.3) (A) Retro-reflectorised Traffic Signs |
| 13 | 5 years Maintenance Charges of Bituminous Work @7.5% Maintenance of Bituminous surface road and/or gravel road and/or WBM road including filling pot holes and patch repair etc., Restoration of rain cuts and dressing of side slopes/ berms, Making of berms/ Shoulders, Maintenance of drains, Maintenance of culverts, Maintenance of gaurd rails and parapet, Maintenance of road signs,speed breakers, standing tree adjacent to road wherever required, Maintenance of 200 m and Kilometer stones, Cutting of branches of trees, shrubs and trimming of grass and weeds etc., White washing of parapets including CD works, Painting of Guard Stones, Re-Fidding of displaced gaurd stones as direction of E/I for the period of 5 Years from the Actual completion of Work As per GO. 17/2024/SA-113/23-1-2024-23-1099/113/2023 Dated 16.01.2024 and ENC letter no. 36890C/RMC/Mool-23-24 Dated 17.02.2024 (Maintenance Charges- For 1st [email protected]%, For 2nd [email protected]%, For 3rd [email protected]%, For 4th [email protected]%, For 5th [email protected]%) on Item No. 1 to 12 |
| 14 | Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 (MORD 3.05 (iii) |
| 15 | Providing concrete for plain (1:3:6) concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (M-10) (MORD 11.04) (i) P.C.C grade M 10 (i) Nominal Mix 1:3:6 |
| 16 | Brick masonry work (1:4) in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 (MORD 11.05) (ii) Brick masonry in 1:4 cement mortar |
| 17 | Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 (MORD 12.02) |
| 18 | Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 (MORD 12.03) |
| 19 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (750 mm dia) |
| 20 | Laying Cement Concrete Pipe NP3 (burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapet (MORD 9.7) 500 mm dia |
| 21 | 5 years Maintenance Charges of Concrete Work @2.5% Maintenance of Concrete surface including Crack Sealing spot patching, Restoration of rain cuts and dressing of side slopes/ berms, Making of berms/ Shoulders, Maintenance of drains, Maintenance of culverts and Cause ways, Maintenance of gaurd rails and parapet, Maintenance of road signs, Speed breakers, standing tree adjacent to road wherever required, Maintenance of 200 m and Kilometer stones, Cutting of branches of trees, shrubs and trimming of grass and weeds etc., White washing of parapets including CD works, Painting of Guard Stones, Re-Fidding of displaced gaurd stones as direction of E/I for the period of 5 Years from the Actual completion of Work As per GO. 17/2024/SA-113/23-1-2024-23-1099/113/2023 Dated 16.01.2024 and ENC letter no. 36890C/RMC/Mool-23-24 Dated 17.02.2024 (Maintenance Charges- For 1st [email protected]%, For 2nd [email protected]%, For 3rd [email protected]%, For 4th [email protected]%, For 5th [email protected]%) on Item No. 14 to 20 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender