Tender For Resurfacing Of 18Mtr, 12Mtr & D-Block Internal Roads In Sector Omicron-Iii, Greater Noida.
Tender Value
1.77 Crore
Estimated cost
Bid Submission
16 Nov 2026
8 days left
EMD
3.56 Lakhs
Bank guarantee accepted
Document Fee
2960
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Resurfacing Of 18Mtr, 12Mtr & D-Block Internal Roads In Sector Omicron-Iii, Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.morth (MORTH-407) |
| 2 | Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means. (MORTH 502/5.01/A(i)) |
| 3 | Providing and applying tack coat with bitumen grade VG-10 using emulsion pressure distributor at the rate of 0.25 kg per Sqm on the prepared bituminous surface cleaned with mechnical broom. (MORTH-503(II)/502) |
| 4 | Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects. |
| 5 | 50mm compacted thickness with bitumen penetration of 60/70 4.5@ by Weight of total mix |
| 6 | Bituminous Concrete Grading 2 (Using waste plastic)Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects MORTH 5.19B |
| 7 | 30mm compacted thickness with bitumen grade VG-30 @4.97% of total mix and plastic @8 percent of bitumen |
| 8 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface.Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes (SOR-2025/Ch-6.2/MORTH-802 (8.13)) |
| 9 | Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender