Tender For Selection Of A Firm For Supply & Fixing Of Wooden Door, Aluminum Work, Aluminum Window Repair, M.S. Bed Repair, Water Proofing Work And Granite Work In The U.G. Hostel
Tender Value
8 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
8 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Selection Of A Firm For Supply & Fixing Of Wooden Door, Aluminum Work, Aluminum Window Repair, M.S. Bed Repair, Water Proofing Work And Granite Work In The U.G. Hostel
BOQ
| Sl. No. | Item Description |
| 1 | Provinding ISI marked flush door shutters conforming to is 2202 non decorative type,core of block board constrution with fram of 1st class hard wood and well matched commerical 3ply veneering with vertical grains & Liminated both side (DSR 9.21) |
| 2 | Provinding wood work infromes of door window clerestory window and other frames wrought framed fixing in position with hold fast lugs or with fasteners of required dia and length. (DSR-9.1.1) |
| 3 | Fixing chowkhats in existng opening inluding embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks of size 15*10*10 cm with cement concrete 1;3;6 painting two coats of approved wood preservative to side of chowkhats and making good the damages to walls and floors as required complete. Door chowkhats (DAR 14.2.1) |
| 4 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) & With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqr) (DSR 21.3.1) |
| 5 | Anti Skidding tap on Stair |
| 6 | MS Bed repair including cost of material & labour. |
| 7 | Fixing of molded marbal/granite stone stip in front of door |
| 8 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / sheat roof paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) .room size 12x12 sqr ft approximate aluminium requird 180 kg |
| 9 | providing and laying rectified glazed ceramic floor antiskid tiles of size 300*300 mm or more of frist quality conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement motar 1:4 ,jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement and matching pigment etc. complete |
| 10 | R.C.C work with cement approved coarse sand and 2 cm .3/4 gauge approved stone grit in the slab proportion 1:2:3 excluding supply of reinforcement and its bending. With 24 b wg binding wire including necessary centering & shuttering & also including supply of all labour tools and plants etc required for proper completion of the works. strength of the concrete shall not be less than m-20 |
| 11 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per directionof Engineer - in - charge, .Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 12 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours, (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours, The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 13 | Brick work in plain arches in superstructure above plinth level and upto floor five level including centering and shuttering complete for span upto 6 metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand). |
| 14 | steel reinforcement for rcc work includind strainghting cutting bending placing in position all complete upto plinth level. 0.882 cum @2%per cum 0.017cum 7850 kg per cum138.47 kg |
| 15 | 20 mm cement plaster of mix 1;6 |
| 16 | providing and laying vitrified floor tiles in different sizes with water abosorption less than 0.08% and conforming to IS 15622 of approved make in all colours and shades laid on 20mm thick cement motar 1:4 ,jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement and matching pigment etc. complete |
| 17 | Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface even and smooth complete but on old treated surface. |
| 18 | wall painting with plastic emulsion paint of approved brand and manufacture to given an even shade: new work (two or more coats) over and including water thinnabl priming coat with cement primer |
| 19 | Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc |
| 20 | plumbing work includinding cost upvc pipe,cpv & pvc pipe .all complete work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender