Tender For Repair/Renovation Of Divisional Office Building At Chatroo (Under Mh-2059) Programme 2026-27. (2Nd Time).
Tender Value
2.93 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
5 days left
EMD
5860
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation Of Divisional Office Building At Chatroo (Under Mh-2059) Programme 2026-27. (2Nd Time).
BOQ
| Sl. No. | Item Description |
| 1 | Distempering with 1st quality Acrylic/oil bound washable distemper(ready-made) having VOC content less than 50 grams/litre of approvedmanufacturer and of required shade and colour complete as per manufacturers’ specifications, one or more coats on old work |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 3 | Providing and fixing Powder coated aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns). For Fixed Portion Aluminium Partition in Drawing Branch. |
| 4 | Providing and fixing Powder coated aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z-sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns).For Shutters |
| 5 | Providing and fixing of Aluminium Composite Panel (ACP) of approved make 3mm thick in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in charge |
| 6 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 5.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 7 | Providing and fixing aluminum round shape handle with SS screws etc. Complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminum |
| 8 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 9 | Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete : |
| 10 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931(make Jaquar) |
| 11 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 12 | Supply and fixing of Ceiling fan, 48 inch Make Usha/Havells/Crompton |
| 13 | Providing and fixing at site fixed cabinets/wardrobes, made of 19 mm thick BWP/BWR grade plywood of approved make, with a depth of 550–600 mm, including 19 mm thick plywood for sides, top, bottom, partitions, adjustable shelves and back panel, finished with white mica laminate on all internal surfaces and 0.8 mm thick decorative laminate of approved shade and make on all external surfaces, including edge banding to all exposed edges, soft-close overlay hinges, suitable Brass/SS designer heavy duty handles, magnetic catchers, locks with keys, wall-fixing fasteners, screws and all necessary hardware, accessories, adhesives like Fevicol and HeatX, complete in all respects, including cutting, fabrication, installation and fixing at site, as per the directions of the Engineer-in-Charge. (Area of Front Elevation to be measured only for payment purposes) |
| 14 | Providing and supplying large-size ergonomic revolving chair for with breathable mesh back, cushioned seat, adjustable armrests, pneumatic seat-height adjustment, reclining and rocking mechanism with tilt-lock facility, sturdy metal base, smooth-rolling castor wheels and all necessary fittings and accessories, complete in all respects, of approved make and quality, as approved by the Engineer-in-Charge. |
| 15 | Providing and supplying one L-shaped executive office table of overall main table dimensions approximately 7'-0\\" (L) × 2'-6\\" (W) × 2'-6\\" (H) or higher, with side return of approximately 3'-0\\" (L) × 2'-0\\" (W) , fabricated from commercial plywood/approved engineered wood board of suitable grade, with all exposed top surfaces finished with good-quality wood-grain decorative laminate of approved shade and design, and balancing laminate provided on the underside of the tabletop to prevent warping. The table shall be provided with matching PVC edge banding on all exposed edges, neatly finished corners and joints, adequate internal supports and rigid framing to ensure stability and durability. The table shall include suitably designed drawers and cupboard storage with matching laminated internal surfaces, smooth-sliding drawer channels, suitable handles, hinges, locking arrangement and all necessary hardware and fittings. . The table shall be properly assembled, levelled and finished, free from sharp edges, gaps, defects and visible imperfections, complete in all respects, including transportation and installation at the designated office, as per the directions of the Engineer-in-Charge. |
| 16 | Providing and supplying visitor chairs having double-pipe chrome-plated SS tubular frame, cushioned seat and back upholstered in good-quality rexine/fabric, with armrests and all necessary fittings, complete in all respects to the satisfaction of the Engineer-in-Charge. |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second Class Kail Wood |
| 18 | Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm) |
| 19 | Providing and fixing readymade tounged and grooved wall panelling/ceiling 12 mm thick, including frame work, sand papering and polishing complete as per direction of Engineering in Charge with all necessary nails and screws. Complete Job. |
| 20 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished withnecessary screws etc. complete 125x65x2.12 mm |
| 21 | Providing and fixing bright finished brass handles with screws etc. complete :125 mm |
| 22 | Wiring for circuit /sub-main of PVC insulated copper conductor of size 1.50 sq.mm including concealement in PVC battens |
| 23 | Supplying and Fixing of 9 Watt LED Bulbs including all necessary fixtures of suitable make and brand as approved by Engg. In Charge. |
| 24 | Supplying and Fixing of 6A Batten Lamp Holder fancy type suitable for wall/ roof mounting including all necessary fixtures of suitable make and brand as approved by Engg. In Charge |
| 25 | Supplying and Fixing of 20 Watt LED Batten Type linear tubelight including all necessary fixtures of suitable make and brand as approved by Engg. In Charge. |
| 26 | Engagement of Electrician for repair of electric illuminaries and other allied electric works Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender