Tender For 1. Construction Of Public Distribution Shop Building At Pitchaikkalpatti Head Of Kottaimaruthur
Tender Value
15.21 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
17 days left
EMD
15500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for 1. Construction Of Public Distribution Shop Building At Pitchaikkalpatti Head Of Kottaimaruthur
BOQ
| Sl. No. | Item Description |
| 1 | 1. Construction of Public Distribution Shop Building at Pitchaikkalpatti H/o Kottaimaruthur |
| 2 | Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundation |
| 3 | Supply Filling in foundation and basement With Gravel including cost and conveyance of all materials to site and all labour charges etc complete |
| 4 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation etc complete |
| 5 | Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete. |
| 6 | Basement |
| 7 | Super Structure |
| 8 | Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete., |
| 9 | Below Ground Level |
| 10 | for plane surface such as RCC floor slab roof beam lintel wtc, |
| 11 | Sunshade |
| 12 | Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc. |
| 13 | Reinforced cement concrete 1:11/2:3 mix using 20 mmHBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete., |
| 14 | Basement |
| 15 | Super Structure |
| 16 | Plastering with cement mortar 1:3 mix to20mm thick including cost and conveyance of all materials to site and all labour charges etc complete. |
| 17 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 18 | Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete. |
| 19 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)inculding cost of white cement and labour charges etc |
| 20 | Weathering course with Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 (using M- Sand) including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete |
| 21 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete mixing , laying ,and finishing etc complete |
| 22 | Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2 20mm thick and pointing with white cement 0.4kg/sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joint neatly complying with std specification |
| 23 | Granolethic floor finish with cement concrete 1:2:4 mix using 10-12mm ISS chips including cost and conveyance of all materials and all labourcharges etc, complete. |
| 24 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 25 | Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete |
| 26 | Painting two coats over new iron works using ready mixed enamel paint including cost and all labour charges etc complete. |
| 27 | Supplying & fixing with cuddapah slabs including cost and all labour charges etc complete. |
| 28 | Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. |
| 29 | Steel Door -D1 |
| 30 | Steel Door D2 |
| 31 | Window |
| 32 | Ventilator V |
| 33 | Ventilator V |
| 34 | Rolling Shutter RS-1 |
| 35 | Rolling Shutter RS |
| 36 | Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for cocealed Light point/fan point (5 points per coil) [ SD No. 24 ] |
| 37 | Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150×100×113mmTW switch box for 5A - 3 pin- non inter locking CS plug Including pin top with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug Point [SD NO 37 ] |
| 38 | Supply and fixing of 3 phase 32A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps .[SD no.135] |
| 39 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb . [ SI 83 ] |
| 40 | Supplying and fixing of CFL bulb |
| 41 | Supply and fixing of single box type 4'36 W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting SD 87 |
| 42 | Supplying and fixing of Ceiling FAN [SD no.110] |
| 43 | Service wire SD 64 |
| 44 | Service Pipe SD 69 |
| 45 | Supplying and fixing in position Indian closet (9oriya type) of size 580 X 400 mm white glazed earthern ware of approved quality and brand with \\"p\\" of \\"S\\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40 mm broken , brick jelly in lime concrete 1:2:5 (One Lime, Two Sand, and Five nrick jelly) 100 mm thick and finishing the top to the require slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masory wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete compleying with standard |
| 46 | Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications |
| 47 | 25mm dia UPVC pipe |
| 48 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 49 | 110mm dia PVC soil / waste pipe |
| 50 | 75mm dia PVC soil / waste pipe |
| 51 | Supplying and fixing HDPE Tank including labour charges etc. complete. |
| 52 | Supplying and fixing 1200mm RCC Ring and Slab including labour charges etc. complete. |
| 53 | Painting and lettering of Name board |
| 54 | Provision for Photographic Charges |
| 55 | GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column \\"BB\\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender