Tender For Fabrication, Manufacture, Supply, Erection, Testing And Commissioning Of Ss Materials, 1X8 Mva Power Transformer, Associated Equipments, Accessories, Control Panel, Supply Of Fire Fighting Equipments And Associated Electrical Works At Chim
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
17 days left
EMD
35000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabrication, Manufacture, Supply, Erection, Testing And Commissioning Of Ss Materials, 1X8 Mva Power Transformer, Associated Equipments, Accessories, Control Panel, Supply Of Fire Fighting Equipments And Associated Electrical Works At Chimmitahalli 33/11 Kv Ss (Hill Area) For Enhancement Of Existing Power Transformer Capacity From 1X8 Mva To 2X8 Mva At Chimmitahalli 33/11 Kv Ss In Gobi Edc Of Erode Region Under Total Turnkey Basis (Supply & Erection Of Power Transformer And Supply Of Breaker On Tnpdcl Scope)
BOQ
| Sl. No. | Item Description |
| 1 | Schedule I - Supply |
| 2 | Schedule II - Erection |
| 3 | GST Amount (Total GST Amount @18%) |
| 4 | Supply of 11KV CT (1200-600/1-1A), outdoor type |
| 5 | Supply of 110V DC indoor C&R Panel for LV Breaker |
| 6 | Supply of 14C x 2.5 Sq.mm Copper cable armoured |
| 7 | Supply of 8C x 4 Sq.mm Copper cable armoured |
| 8 | Supply of 4C x 4 Sq.mm Copper cable armoured |
| 9 | Supply of 4C x 2.5 Sq.mm Copper cable armoured |
| 10 | Supply of 2C x 2.5 Sq.mm Copper cable armoured |
| 11 | Supply of Zebra ACSR conductor |
| 12 | Supply of 33KV Lightning Arrester Station type |
| 13 | Supply of 11KV Lightning Arrester Station Type |
| 14 | Supply of 22kV PT Insulators |
| 15 | Supply of 11KV PT Insulator |
| 16 | Supply of 11KV, 120KN Disc insulators (Antifog) |
| 17 | Supply of Tension fitting Clamp 4 Bolted for Zebra |
| 18 | Supply of T Clamp for 2\\" Bus to Single Zebra |
| 19 | Supply of T Clamp for Zebra to Zebra |
| 20 | Supply of Switchend clamp for Single Zebra |
| 21 | Supply of Switchend clamp for 2\\" Busbar |
| 22 | Supply of L Clamp for Zebra |
| 23 | Supply of Reducer clamp for 2\\" Bus to Zebra |
| 24 | Supply of PG Clamp for Zebra |
| 25 | Supply of Free end clamp for 2\\"Busbar |
| 26 | Supply of Corana Bell for 50mm Bus Bar |
| 27 | Supply of Seating Block for 2\\" Bus bar(for giving Elect Conn) |
| 28 | Supply of 33KV Double break Centre rotating AB switch without Support Structure with PT insulators |
| 29 | Supply of 11KV Double break Centre rotating AB switch without Support Structure with PT insulators |
| 30 | Supply of various types of hot dip galvanised fabricated steel structures confirming to IS 2062 Gr A at site as per the std.design/ Drawing, including Freight & Handling, Loading, unloading, Labour, machinery and Consumables and as directed by the field Engineer at the SS site. |
| 31 | 33 KV Power Transformer Gantry structure |
| 32 | 33 KV AB switch structure (1.8 m centre) |
| 33 | 33 KV Pie support Structure (1.8 m centre) |
| 34 | 33 KV LAS Structure under Bus Bar (1.8 m centre) |
| 35 | Supply of various types of Non-specfied hot dip galvanised fabricated steel structures for Extension, Alterations, and Deductions confirming to IS 2062 Gr A at site as per the std.design/ Drawing, including Freight & Handling, Loading, unloading, Labour, machinery and Consumables and as directed by the field Engineer at the SS site. |
| 36 | Heavy section using RSJ 250 x 125 mm |
| 37 | Heavy section using RSJ 200 x 100 mm |
| 38 | Light Section (other than heavy section) |
| 39 | Supply of various types of Non-specified Light section (other than heavy section) Mild steels including Cost of steel, Freight & Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables and as directed by the field Engineer at the SS site. |
| 40 | MSC 100x50 |
| 41 | MSA 65x65x6 |
| 42 | MSA 50x50x6 |
| 43 | MS 6mm Chequered Plate |
| 44 | MSA25x25x3 |
| 45 | Supply of various types of Other station structures Mild steels including Cost of steel, Freight & Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables and as directed by the field Engineer at the SS site. (11 KV Breaker Platform) |
| 46 | Supply of 50mm Aluminium Bus bar |
| 47 | Supply of Portable Dry Chemical Powder type cylindrical shape 5/6 KG capacity fire extinguisher wilth initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of ISI certification mark. |
| 48 | Supply of Fire/Water bucket of 10 lits capacity made out of 26Swg (0.46 mm) M.S.Sheet painted with white & red enamal paint in side & out side respectively bottom of bucket shall be ` U ` shapped out side of the bucket shall be written as Fire in English /Tamil in white enamal paint including cost of all materials. |
| 49 | Supply of G S Rod of 40mm dia 6 mtr Length, A4 Grade Bentonite powder(30 KG) and low resistivity red soil(for mixing with bentonite powder for refilling the pit with the mixed slurry), material supply for earth Risers clamp for interconnecting the earth rod and GS flats, including supply of identification board of size 300x150mm of 14swg, primer and enamel painting 2 coats and lettering of board and 12mm M.S. Rod of length 1m for welding to the board. |
| 50 | Supply of Earth Spikes by using 40 mm G.S.Rod (300 mm) & GI Earth pipe (40 mm Dia, 3m length) , GI Angle (50x6x450mm), Bolt, Nut with washer etc |
| 51 | Supply of GS FLAT 65X10 mm |
| 52 | Supply of GS FLAT 50X8 mm |
| 53 | Supply of Rubber mat of size 2000X1000X10mm as per relavent ISI Code. |
| 54 | Supply of HTGS Earth Wire 7/3.55 mm |
| 55 | Supply and provision of M8, M10, M12 and M16 (full /Half thread) G.I.bolt and nuts of various sizes including plate/ spring washers as required and as directed by the field Engineer. |
| 56 | Labour for erection of 33/11 kV Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field Engineer. |
| 57 | Labour for erection of Measurement transformers 33/11KV , CT without using crane including providing holes wherever required as directed by the field Engineer. |
| 58 | Labour for the Erection of Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers including consumables as directed by the field Engineer. |
| 59 | Labour for erection of cable in duct/ trench/ clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables including fabrication of clamps and fixing at uniform intervals as directed by the field Engineer |
| 60 | Upto 8 Core |
| 61 | Above 8 core |
| 62 | Labour charges for laying of conrol/yard light cable by digging cable trench of size 0.3mx0.6m filling with for a depth of 0.2m, covering with one layer of country bricks and refilling with excavated earth and including cost of sand & bricks etc., |
| 63 | Providing PVC down fall pipe using 110mm dia 4Kg/sqcm, PVC pipe and PVC clamp line supreme ec, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers as required and as directed by the field Engineer. |
| 64 | Supply and glanding of ISI mark 16/19 mm cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field Engineer. |
| 65 | Supply and glanding of ISI mark 22/25 mm cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field Engineer. |
| 66 | Supply and glanding of ISI mark 28 mm cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field Engineer. |
| 67 | Supply and glanding of ISI mark 32 mm cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field Engineer. |
| 68 | Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field Engineer. (No.of core ends in unit of 1000). |
| 69 | Labour for erection of 33/11 kV LAS station/ Distribution type single unit including monitors & accessories. |
| 70 | Labour for erection of 33/11 kV LAS station/ Distribution type single unit including monitors & accessories. (With LC Work) |
| 71 | Supply and fabrication and erection of Galvanized Iron eye bolts with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer |
| 72 | Labour for the Erection of Strung bus upto 33 kV Single conductor Bus/phase and all related hardwares, fittings, clamps including Meggering, hoisting of insulators and consumables and as directed by the field Engineer.(4 Bus x 3 conductor = 12 span) (With LC Work) |
| 73 | Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field Engineer. |
| 74 | 50 mm (1 length) |
| 75 | 50 mm (1 length) (With LC Work) |
| 76 | 50 mm with bend (1 length) |
| 77 | Labour for the erection of Insulator single pole stack for supports/ Underhang including Meggering & other consumables and as directed by the field Engineer upto 33 kV |
| 78 | Labour for the Erection of Jumper/ Droppers using Zebra Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field Engineer. |
| 79 | Labour for the Erection of Jumper/ Droppers using Zebra Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field Engineer. (With LC Work) |
| 80 | Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply, Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible tinned copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/ MCBs including consumables, freight, etc., as directed by the field Engineer on site requirements. (The box shall be vermin proof shall have sturdy hinges, & locking arrangements) |
| 81 | Supply and fixing of mounting channel suitable for CBTM 5 terminal block in panel /box as required and as directed by the field Engineer. |
| 82 | Supply and fixing of Disconnecting type (Link type) Terminal blocks of reputed make such as Elmex/WAGO/ Connectwell Phoenix as directed by the field Engineer. |
| 83 | Supply and fixing Fuse unit of reputed make with ISI as directed by the field Engineer including drilling & fixing. |
| 84 | 16Amps HRC Backlite Fuse unit |
| 85 | 63Amps HRC Backlite Fuse unit |
| 86 | Supply and fixing of HRC fuse of reputed make as directed by the field Engineer. |
| 87 | 2/5/10/16Amps |
| 88 | 63 Amps |
| 89 | Supply and fixing of fuse unit of reputed make with ISI as directed by the field Engineer including drilling & fixing. 16/32 Amps Porcelain Rewirable Fuse unit |
| 90 | Supply and fixing of MCB of Havells/Schneider/ MDS/ Reputed make with ISI mark wherever required as directed by the field Engineer. |
| 91 | 32 AMPS - 3 phase, 4 pole |
| 92 | 16 AMPS - single phase, single pole |
| 93 | Labour for erection of Isolators with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field Engineer. |
| 94 | 33 KV Isolator |
| 95 | 11 KV Isolator (With LC Work) |
| 96 | Supply and fixing of godrej 6 lever long shackle navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field Engineer. |
| 97 | Supply and provision of 12/25x3mm flexible braided tinned copper / tinned copper flats as required and as directed by the field Engineer. |
| 98 | Supply and erection of \\"B\\" class 40 mm G.I.pipe for extension of tandem/ down pipe for A.B.Switches and for any other work required as directed by the field Engineer. |
| 99 | Labour for the Erection of the fabricated steel structures at the SS site with Supply of GI Bolts, Nuts & Washers (Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer. |
| 100 | 33 KV Power Transformer Gantry structure |
| 101 | 33 KV AB switch structure (1.8 m centre) |
| 102 | 33 KV Pie support Structure (1.8 m centre) |
| 103 | 33 KV LAS Structure under Bus Bar (1.8 m centre) |
| 104 | Labour for the Erection of the non specified steel structures , Extension, Alterations, and Deductions as per station requirement. at the SS site with Supply of GI Bolts, Nuts & Washers (Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer. |
| 105 | Heavy section using RSJ 250 x 125 mm / 200 x 100 mm |
| 106 | Light section (other than heavy section) |
| 107 | Labour for the Erection of the Other Station Structures at the SS site with Supply of GI Bolts, Nuts & Washers (Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer. (11 KV Breaker Platform) |
| 108 | Supply and Erection of GI pipe 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs & 2.5inch dia for 2mtrs) including single/double fitting (Straight or 'V' type) fixing arrangements, 1 inch dia B class pipe arms, yard light box fixing flat |
| 109 | Supply and Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet including primer paint as per Drawing including the Supply, Fabrication and Erection of Box fixing Flat using 50x8MSF, Two coat of enamel paints, provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connectors including its cost materials, consumables, freight, etc and as directed by the field Engineer on site requirements. (The box shall be vermin proof, shall be provided with sturdy hinges, with provision for cable entry and locking arrangements). |
| 110 | Supply and Erection of reputed make street light fitting with 1x(70-75)W or 2x(35-40)W, 240V CGL/ PHILIPS make LED Light. |
| 111 | Labour charges for two coats of enamel painting in substation structures, steels etc., including the cost of reputed make paints and other consumables as directed by the field engineer. |
| 112 | 11 KV Breaker Platform |
| 113 | 250 x 125 RSJ Pole Bottom (height 0.45 to 0.5 m) |
| 114 | 200 x 100 RSJ Pole Bottom (height 0.45 to 0.5 m) |
| 115 | Yard Light Pole Bottom |
| 116 | Supply of pait of reputed make (i.e Asian,Dulex,Nerolac paint) & Labour for second coat of painting using Aluminium paint including consumables. |
| 117 | Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field Engineer. |
| 118 | Labour charges for writing details in any finished surface boards including cost of enamel paint (Dulex,Asian,Berger preferred) and other consumables as directed by the field Engineer |
| 119 | Supply and erection of Vinyl Sticker cutting/ Printing on Vinyl Sticker/ Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field Engineer. |
| 120 | Labour for Providing earth pit (dia 100/125 mm for power rig or 140/150 mm for hand bore) upto 6 m for conventional Earth Electrodes and inserting G S Rod of 40mm dia into the bore and refilling with slurry of 30 KG of A4 Grade Bendonite Powder mixed with low resistivity soil and pouring water and tightening of earth bore upto satisfactory earth value, complying with requirements of IS 3043-1987 & as per approved drawing. Fixing of GS Flat clamp of size 65 x 10 mm for Interconnecting the earth rod and GS earth flat risers by . Fixing of identification board of size 300x150mm of 14swg and 12mm M.S. Rod to be fixed to the board as directed by the field engineer. |
| 121 | Labour for Providing earth pit (dia 100/125 mm for power rig or 140/150 mm for hand bore) upto 6 m for conventional Earth Electrodes and inserting G S Rod of 40mm dia into the bore and refilling with slurry of 30 KG of A4 Grade Bendonite Powder mixed with low resistivity soil and pouring water and tightening of earth bore upto satisfactory earth value, complying with requirements of IS 3043-1987 & as per approved drawing. Fixing of GS Flat clamp of size 65 x 10 mm for Interconnecting the earth rod and GS earth flat risers by . Fixing of identification board of size 300x150mm of 14swg and 12mm M.S. Rod to be fixed to the board as directed by the field engineer. (With LC Work) |
| 122 | Supply and providing of 600mm mean dia, 300mm height 36mm thick cement coller for identification of earth electrode location including 1primer and 2 coats of colour wash as directed by field Engineer |
| 123 | Labour for excavating and refilling of earth / trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field Engineer. Semi Density Rock soil |
| 124 | Labour, machinery, consumables for fabrication, erection of earthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike) as directed by the field Engineer. |
| 125 | Labour charges for providing earth spike with GI pipe including fabrication of base frame, painting and fixing as per departmental specification excluding cost of GI pipe, MS flats, base angles, etc., |
| 126 | Testing and Commissioning of all SS equipments and materials including earthing Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender