Tender For Improvement Works To Science Park At Alagappa Road In Ward No.68, Central Zone. Roc No.8318/2026/Md5
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
16 days left
EMD
7500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Works To Science Park At Alagappa Road In Ward No.68, Central Zone. Roc No.8318/2026/Md5
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification. |
| 2 | Plain Cement concrete 1:4:8 [one cement, four M-sand and eight course aggregates] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification. |
| 3 | Supplying and erecting centering to sides and soffits including supports and strutting for drainage sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over (silver oak joists) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification. |
| 4 | Plain Cement Concrete 1:3:6 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification. |
| 5 | Plastering with cement mortar 1:5 mix, 12mm thick - 1 m2 etc Complete as per directional of Departmental Officers. |
| 6 | Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block size 63mm thick in uniform shape of approved make to be laid in herring bone pattern with approved non sticking surface in the top and the rate including leveling 6 the base, preparation of sub base with sand cushion 100mm thick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification |
| 7 | Supply and Filling with well gravel layer by layer including cost of watering, consolidation,ramming and cost and conveyance of all materials etc., complete as per specifications. |
| 8 | Supply and fixing of Science Park Play Equipements using M.S.Pipe plates and sheet as per the direction of Dept. Off., etc. complete |
| 9 | Worm Wheel Mechanism |
| 10 | Crystal Structure Model |
| 11 | DNA Model |
| 12 | Illusion Model |
| 13 | Plain Cement Concrete 1:2:4 using 20 mm gauge hardbroken jelly including laying, consolidating, finishing, rendering the top surface rough, curing, etc. complete complying with standard specification etc., Complete complying with standard specification and as directed by the departmental officers. |
| 14 | Supply and delivery of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length including Transport, loading and unloading Charges etc complete., as per directional of departmental officers |
| 15 | Supply and delivery of 30W LED Street Light Fitting with LED including cost and conveyance of all materials and all labour charges etc complete .M-1290 |
| 16 | Supply and laying of 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete as per directional of departmental officers. SD-197 |
| 17 | Supply of Astronomical Weekly Programmable Timer Switch etc Complete as per directional of Departmental Officers. |
| 18 | Removing and Refixing of old Rubber Moulded Hydraulic Pressed Paver Block size 63mm thick in floor surface in the top and the rate including leveling the base, preparation of sub base with sand cushion 100mm thick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification |
| 19 | Painting with best synthetic enamel paint of approved Colour and high quality one / two coats to old / new iron works etc Complete as per directional of Departmental Officers. |
| 20 | Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required - 1 m2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender