Tender For Road Safety Improvement Works On The Baruasagar–Tahrauli–Bhasneh–Garautha Mdr-48B Road Under The Zero Fatality District Scheme.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
10 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
860
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Road Safety Improvement Works On The Baruasagar–Tahrauli–Bhasneh–Garautha Mdr-48B Road Under The Zero Fatality District Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Retro-reflectorised Traffic sign as per IRC-67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate fo having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner remova, adhesion, impact resistance, specular floss adn fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International / Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be obtained from Indian conditon within 3 years of launching of product by the manufacture in abroad, Alternatively, a certificate conforming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so dedires, could seek for a performance guarentee which be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. Proof of the same in form of government report shall be uploaded while quoting tender. (As per LKO SOR SI No-18, P-57)i) 90 cm equilateral tringle with diffinitation plate size (20cm X 60cm) T-Section |
| 2 | iii) 60 cm Circular with diffinitation plate (20cm X 60cm) Speed limit |
| 3 | iv) 80mmx60mm rectangular with diffinitation plate |
| 4 | vii) 90 cm high octagon Stop Sign |
| 5 | viii) 50x60 cm single chevron |
| 6 | x) 30X90 cm (Left/Right) Object Hazard |
| 7 | (Repeated/ Tranvers bar)Road Marking with Hot Applied Thermoplastic Campound with Rflectorising Glass Beads on Butminous Surface. Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC-35-2015 The finished surface to be level, uniform and free from streaks and holes. (As per LKO SOR SI No-3, P-54) |
| 8 | Crash Barrier - Providing & Fixing a 'W' metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm spaced 2m centre to centre,1.8m high,1.1m below ground/road level, allsteel parts and fitment to be galvanised by hot dip process,all fittings to conform toIS:1367&IS:1364,metal beam rail to be fixed onthe vertical post with (C.C.1:2:4) & Spacer Channel Section 150x75x5mm, 330mm long complete as per clause 810. |
| 9 | Providing and fixing retroreflective delinator post IZ-ASTMAD- 456-04 made of 75mm dia round pipe of 1-20 mtr. Height with fixing support of flat iron 25x25 mm retroreflective strip 4 no fixed round side of the post electric welded and coveres with jali and painted with black paint including GST and all other taxes and cartage etc. complete with fixing at site as per direction of E/I |
| 10 | Road Marking with Hot Applied Thermoplastic Campound with Rflectorising Glass Beads on Butminous Surface.Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC-35-2015 The finished surface to be level, uniform and free from streaks and holes. (As per LKO SOR SI No-2, P-54) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender