Tender For Construction Of Anganwadi Building (Puf Panel Roof ) At Kelal Village In Pulithikulam Panchayat
Tender Value
15 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
4 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ramanathapuram → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Anganwadi Building (Puf Panel Roof ) At Kelal Village In Pulithikulam Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Anganwadi Building (PUF Panel Roof ) at Kelal Village in Pulithikulam Panchayat |
| 2 | Earthwork excavation and depositing on bank with initial lead and list in all classes of soils except hard rock reg. blasting etc., complete as per SS 20B for foundation. |
| 3 | Sand filling with M.Sand inculding cost and coveyance of all materials to site including labour for mixing ,l aying,curing etc complete., |
| 4 | Collection and supply of Conveyed earth from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete, |
| 5 | Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost of conveyance of all materials and all labour charges etc., complete for foundation |
| 6 | Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc. |
| 7 | Providing centering and soffits including cost and conveyance of country wood and all labour charges etc., complete. |
| 8 | Providing centering and soffits including cost and conveyance of country wood and all labour charges etc., complete. |
| 9 | RCC 1: 1.5 : 3 mix using 20mm HBG metal including cost and conveyance of all materials to site and all labour charges etc. complete. |
| 10 | Brick work in Cm 1:5 mix using country brick including cost and conveyance and all labour charges etc. |
| 11 | Paving the floor with best quality Kotta stone slab of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixe |
| 12 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 13 | Granolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing etc |
| 14 | Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2 20mm thick and pointing with white cement 0.4kg/sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joint neatly complying with std specification |
| 15 | Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 16 | Plastering with Cement Morter 1:3 mix 10 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc |
| 17 | emulsion painting with two coats, Using exterior emulsion paint including cost and conveyance all materials and scaffolding charges etc., complete complying with standard specifications as directed by the departmental officers. Rate for 10m2. |
| 18 | Oil bound Distempering painting with two coats, Using Oil bound Distemper including cost and conveyance all materials and scaffolding charges etc., complete complying with standard specifications as directed by the departmental officers. Rate for 10m2. |
| 19 | Painting two coat of new iron works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete. |
| 20 | Supplying and fixing following thickness of cuddapah slab for cupboard Supplying and fixing following thickness of cuddapah slab for cupboard |
| 21 | Supplying and fixing G.I 'L' angle of size of any size including cutting the angle to the required length drilling holes wherever necessary for fixing the pipe purlins, rafters and fixing the post etc., complete. |
| 22 | Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required. |
| 23 | Wiring 2 x 1.5 sq.mm (22/0.30)PVC insulated unsheathed SC.cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with in flush with wall covered with hylem sheet of 3 mm thick with painting of suitable colour for concealed PVC light/ fan point (SD No.20) |
| 24 | Supply and fixing of 4'-18W LED tube with fitting inclusive of all charges |
| 25 | supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rod on the existing clamp SD 110 |
| 26 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb |
| 27 | Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64) |
| 28 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No. 125) |
| 29 | Supply and fixing of single box type 4'22W LED fitting complete with built in driver and clamps to fix on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting |
| 30 | Supply and fixing of indian Water closet with \\"P\\" ' S' trap, PVC Pipes, 580mm x 440mm etc. complete. |
| 31 | Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe |
| 32 | Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position etc., |
| 33 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair |
| 34 | Bala Painting including cost and conveyance all materials and scaffolding charges etc., complete |
| 35 | Provision for Rain water pipe |
| 36 | SuProviding and fixing GYP board false ceiling and fixing with a new Gyp board False ceiling which includes 'U' shaped GI channels of size 25x25x0.5mm thick |
| 37 | Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. |
| 38 | Doors D-0.90x2.10m-3nos |
| 39 | Doors D1-1.10x 2.10 m -1nos |
| 40 | Doors D2-0.75x 1.20m -1nos |
| 41 | Window W(1.20x1.30m) -6nos |
| 42 | Ventilator(0.90x0.45m) -1nos |
| 43 | jolly(0.60x0.45m) -1nos |
| 44 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender