Tender For Special Repairs To Sirunaickenkulam Sluice Shutters Of Palani Village Of Palani Taluk In Dindigul District.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Nov 2026
15 days left
EMD
2300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dindigul → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Sirunaickenkulam Sluice Shutters Of Palani Village Of Palani Taluk In Dindigul District.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing the Scrub jungle and destroying the same effectively as directed by the departmental officers. |
| 2 | Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete complying with standared specification and as directed by the departmental officers.. |
| 3 | Fabricating, Supplying and fixing of 50mm dia Srew rod made up of Mild steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes, conveying and leading the screw rod to the worksite. Fixing the Srew rod to the shutter gusset plate with required bolt and nut in proper alignment to the Head set including dismantling the existing damaged srew rod, conveying and stacking at section store. The screw rod should be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials labours charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc.,complete complying with standared specification and as directed by the departmental officers |
| 4 | Supplying and fixing of Head set Assembly Lighy duty with hexagonal nut (Approximate 50Kg) made up of cast iron including moulding, machining and the hezagonal nut threaded to suit the Screw rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the worksite. Fixing the head set assembly to the top beam by using required rust free bolts and nuts in proper alignment including dismantling the existing damaged head set assembly supplied with operating key and the both should be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials labours charges for wooden pattern, moulding and charges and materials and warranty for 5 years etc.,complete complying with standared specification and as directed by the departmental officers |
| 5 | Earth work excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam and ordinary soil including excavated earth etc., complete complying with Standard specification and as directed by departmental officers. |
| 6 | Total Civil Works |
| 7 | GST (18%) (CGST 9 % + SGST 9% ) |
| 8 | Grand Total Value Put to Tender Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender