Tender For Estimate For Construction Of Concrete Bathing Ghat Of Kanaigore Pond At Srigram Village, Mouza- Srigram, J.L No- 07, Under Agrdanga G.P, Within Ketugram-I P.S. (Fund: - Xvi F.C. Untied, 2026-27). Cd- 135753484.
Tender Overview
Project Description
Tender for Estimate For Construction Of Concrete Bathing Ghat Of Kanaigore Pond At Srigram Village, Mouza- Srigram, J.L No- 07, Under Agrdanga G.P, Within Ketugram-I P.S. (Fund: - Xvi F.C. Untied, 2026-27). Cd- 135753484.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. [DSR-2023, Vol-I Pg No: 87, It No: 2.8.1] |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. [DSR-2023, Vol-I Pg No: 90, It No: 2.27] |
| 3 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. [DSR-2023, Vol-I Pg No: 175, It No: 11.2] |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). [DSR 2023, Vol-I Pg No: 96, It No: 4.1.3] |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). [CPWD DSR 2023, VOL-I, P- 105, Code no.- 5.1.2] |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (1 % of Concrete Vol upto Plinth level) Thermo-Mechanically Treated bars of grade Fe-500D or more. [DSR 2023, Vol-I Pg No: 110, It No: 5.22, 5.22A] |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. [DSR 2023, Vol-I Pg No: 107, It No: 5.9.1, 5.9.5, 5.9.6] |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts. [DSR 2023, Vol-I Pg No: 107, It No: 5.9.1, 5.9.5, 5.9.6] |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. [DSR 2023, Vol-I Pg No: 107, It No: 5.9.1, 5.9.5, 5.9.6] |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand). [DSR 2023, Vol-I Pg No: 118, It No: 6.1.2] |
| 11 | 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) (Inside). [DSR 2023, Vol-2 Pg No: 200, It No: 13.1, 13.2, 13.3] |
| 12 | 15 mm cement plaster on the rough side of single or half brick wall of mix (Out side) 1:6 (1 cement: 6 fine sand). [DSR 2023, Vol-2 Pg No: 200, It No: 13.1, 13.2, 13.3] |
| 13 | Neat cement punning. [DSR 2023, Vol-2 Pg No: 201, It No: 13.18] |
| 14 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm). [DSR 2023, Vol-2 Pg No:202, 203, It No: 13.44 & 13.37] |
| 15 | White washing with lime to give an even shade : new work (Three or more coats). [DSR 2023, Vol-2 Pg No:202, 203, It No: 13.44 & 13.37] |
| 16 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage (3' x 4') |
| 17 | Modifed estimated cost after using correction factoron DSR-2023 on account of GST @0.973 as per O.M issued by DG, CPWD |
| 18 | Applying cost Index for Purba Bardhaman (1.09) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender