Tender For Repair/Maintenance Of Mt Vehicles Held With Age (I) R&D Jodhpur
Tender Value
8.07 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
15 days left
EMD
16140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/Maintenance Of Mt Vehicles Held With Age (I) R&D Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Comprehensive maint and servicing of the Vehicle (Make:- Hero Delux - 01 Nos, and Bajaj Platina - 01 Nos) Checking the serviceability of the vehicle oiling, Engine tuning, overhauling fixture accessories replacement of first moving parts changing oil/fuel filters, replacement of bulbs, fuses, repairing of wiring, replacement/topuping of Engine oil and Air Filter/Air Cleaner, maint of battery with electrolyte solution, distilled water, Checking of the Battery Charging system, Cotton waste,as per make and model required complete all as directed by the Engineer-in-Charge.Note - (i) All spare parts, oil etc items shall be measured and paid Separately under BOQ as supply only'. |
| 2 | Supply only In spark plug. |
| 3 | Supply only In rear Socker seal. |
| 4 | Supply only In front Socker seal. |
| 5 | Supply only In Front wheel bearing. |
| 6 | Supply only In Rear wheel bearing. |
| 7 | Supply only In Odometer assy including Cable complete. |
| 8 | Supply only In Clutch cable/wire. |
| 9 | Supply only In Side looking mirror |
| 10 | Supply only In Indicator lamp complete. |
| 11 | Supply only In Clutch plate |
| 12 | Supply only In Break shoe (Front & Rear) |
| 13 | Supply only In Head light LED bulb |
| 14 | Supply only In Chain sprocket |
| 15 | Supply only In Air filter. |
| 16 | M&L for removing wheel of motorcycle complete with tyre and tube, taking out tube repair, punchere of tube and refixing properly complete all specified and directed. |
| 17 | Repair to TATA XENON |
| 18 | M&L Denting Work where needed on complete Vehicle TATA XENON, Removing Old Paint by scraping, cleaning with caustic soda and making surfaces even and smooth by applying Putty, Rubbing, Cutting, Polishing all as required and applying one Coat of Primer and Two Coats of NC Paint by Spray Painting in separate Booth (Workshop) as per existing Paint/ Shape by Preventing Non Painting Parts (as ordered by Engineer-in-Charge) including application Two Coats of Anti Corrosive Black Paint to Flooring both sides of Wheel Mud Guard under Courage, Writing Vehicle BA No, Firm Name, complete all as specified and as directed.NOTE: Colour of Paint & Writing Vehicle BA No & Firm Name will be decided by Eingineer-in-Charge. |
| 19 | M&L Opening Dynamo from TATA XENON for Servicing/ Overhauling (at Contractor's Workshop) including Replacement of Carbon Bushes, Armature Winding and Bush Bearing, Re-assembling and fixing to Vehicle including Testing, complete all as specified and as directed. MAKE: MICO/LUCAS or as approvedNOTE: Cost fo Materials required for Servicing/ Overhauling and New Parts will deem to be included in the Quoted Unit Rate. |
| 20 | M&L Opening Self Starter from TATA XENON for Servicing/ Overhauling at Contractor's Workshop including replacement of worn out Pinion, Varnish of Coil, Replacement of Solenoid Switchk, Carbon Bush, Armature Windinand re-assembling with Engine, complete all as specified and as directed. MAKE: MICO/LUCAS or equivalent as recommended by Manufacturers. |
| 21 | M&L Opening/ Dismantaling Suspension System (Complete) from the TATA XENON and replacement of Front Suspension Complete, Anti-Roll Bars, Rear Suspension complete, Shock Absorbers with necessary Nut, Bolts, Washers etc. complete all as specified and as directed.MAKE: TATA XENON or as approved |
| 22 | M&L Opening Complete Window with inner Flap, Locking, Opening (Outer and Inner) Arrangements, Servicing and Minor Repairs for Opening and Closing of Window Mirror including replacement of Locking Button, Window Opening Handle from Inner and Outer Side, Window Mirror up and down Handle for TATA XENON and re-fixing of all Parts, Testing on completion, complete all as specified and as directed.NOTE: New Parts will be as per existing One and as approved by GE/ Engineer-in-Charge. |
| 23 | M&L Repairing/ Servicing carefully of Water Pump alongwith Waterbody Assembly with necessary Accessories for TATA XENON, replacing Unserviceable Parts with existing shape/ size, re-fitting the same, Testing on completion, complete all as specified and as directed. NOTE: Cost of New Parts will deem to be included in the Quoted Unit Rate. |
| 24 | M&L Taking down the existing Clutch System from TATA 207/TATA XENON, Replacement of clutch Plate (Make: REPCO/ TATA GENUINE), Pressure Plate (MAKE:REPCO/TATA GENUINE), Withdrawal Bearing (MAKE:SKF/REPCO/TATA GENUINE) or as approved by GE/ Engineer-in-Charge and fixing to Vehicle, Testing on Completion for Smooth Working, complete all as specified and as directed.NOTE: Cost of New Parts will deem to be included in the Quoted Unit Rate. |
| 25 | M&L Taking down complete Gear Box from TATA XENON by opening, Dismantalling, Tasking out All Parts, cleaning of Serviceable Parts with Petr4ol, Replacement of Unserviceable Parts, Re-assembling Gear Box and Re-Fixing to Vehicle, Testing on completion for the smooth functioning of shifting of all forward and Reverse Gear, complete all as specified and as directed. MAKE: MARUTI GENUINE/ZF OR as approvedNOTE:Cost of New Parts will deem to be included in the Quoted Unit Rate. |
| 26 | M&L Taking down Complete Steering System from TATA XENON by Opening/ Dismentalling, Taking Out All Parts, Cleaning of Serviceable Parts and replacemtn of Unserviceable Parts (Steering Column, Tie rod, Spindles, Universal Joints, Pitman Arm, Steering Gear Box Assembly, Drag Link Assembly) and Re-assembling and fixing to Vehicle and Testing and Testing on completion, complete all as specified and as directed. MAKE: MARUTI GENUINE/RANE/ZF or as approved.NOTE: Cost of New Parts will deem to be included in the Quoted Unit Rate. |
| 27 | M&L Taking out Front/Rear Wheels Complete from TATA XENON, Cleaning, Polishing & Overhauling of Brake System (of 2x2 No of Wheels) by providing new Wheel Cylinder Kit, Brake Shoe, Brake Liner, Brake Pipes Complete (MAKE: TVS/BOSCH/TATA GENUINE), Cleaning & Polishing of Wheel Drum, Greasing of Front and Rear Wheels Bearing, Taking out Tyres, Tubes of Each Wheels, Cleaning of Each Wheels/Disc/Rims and applying Two Coats of Anti-corrosive Paint after obtaining a Smooth Surface, reassembling of Wheels and re-fixing all Parts including Wheel Alignment. |
| 28 | M&L Brake Master Cylinder Kit suitable for TATA XENON including Taking out existing Leakage Brake Master Cylinder Kit from the Vehicle, complete all as specified and as directed.MAKE:TVS/TATA GENUINE or as approved. |
| 29 | S&F Front Wind Glass fixing with Rubber Bedding with Lock of Bedding for TATA XENON, Testing of Vehicle on Running Condition on Breakers & after applying Sudden Breaks including removing old broken Wind Glass fixing with Rubber Bedding, Complete all as specified and as directed.MAKE: ATUL or as approved. |
| 30 | M&L Seat Covers (as approved/ as per existing) suitable for TATA XENON and fixing properly including Taking down wornout upholstry from Vehicle, complete all as specified and as directed.NOTE: Seat Covers will be as approved by GE/Engineer-in-Charge. |
| 31 | M&L Foot Mats, Steering Covers, Clutch, Brake & Accelerator Pedal Rubber Shoes and other Auxilaries suitable for TATA XENON including removing existing Foot Mats, steering Covers, Clutch, Brake & Accelertator Pedal Rubber Shoes etc complete all as specified and as directed.MAKE: KK/LUCAS/TATA GENUINE |
| 32 | M&L Side Indicator Assembly (Front) with cover and lamps of appropriate Wattage (as approved/ as per existing size/Shape) suitable for TATA XENON including Taking down/out unserviceable Front Side Indicator Assembly, complete all as specified and as directed.MAKE: LUCAS or as approved. |
| 33 | M&L Tail Light Assembly Complete (Brake Light/ Side Indicator Light/Parking Light) with Lamps of appropriate Wattage and suitable for TATA XENON, Testing on completion including taking down/out unserviceable Tail Light Assembly, complete all as specified and as directed.MAKE: KK/LUCAS/TATA GENUINE |
| 34 | M&L Window rear View Mirror (as approved/ as per existing) suitable for TATA XENON including taking down existing Window rear View Mirror, complete all as as specified and as directed.MAKE: NEO GOLD/TATA GENUINE or as approved. |
| 35 | M&L Wheel/ Tyre Top Plastic Cover with all necessary Fitting (As approved/ as per existing Shape & Size) suitalbe for TATA XENON and Testing on Completion in Running Condition including taking down existing Wheel/ Ture Top Plastic Cover, complete all as as specified and as directed. |
| 36 | S&F Air Filter (as approved/ as per existing) suitable for TATA XENON including Taking down existing Air Filter, complete all as as specified and as directed.MAKE:LEYPART/ MICO/TATA |
| 37 | S&F Diesel Filter (as approved/ as per existing) suitable for TATA XENON including taking down existing Diesel Filter, complete all as as specified and as directed.MAKE: LEYPART/ MICO/ TATA |
| 38 | S&F Oil Filter (as approved/ as per existing) suitable for TATA XENON including taking down existing Oil Filter, complete all as as specified and as directed.MAKE: LEYPART/ MICO/ TATA |
| 39 | S&F Alternator (as approved/ as per existing), 12 Volt suitable for TATA XENON including removing existing Alternator, complete all as specified and as directed.MAKE: LUCAS/ MICO or as approved. |
| 40 | M&L Fuel Gauge including meter Wiring System, suitable for TATA XENON, Testing on Completion including removing existing Fuel Gauge, complete all as specified and as directed.MAKE: TATA or as approved |
| 41 | M&L Temperature Gauge including meter wiring system, suitable for TATA XENON, Testing on Completion including removing existing Gauge, complete all as specified and as directed.MAKE: TATA or as approved |
| 42 | M&L Taking out carefully Diesel Engine from TATA XENON, Opening/Dismantalling Head Assembly complete of Diesel Engine , Piston, Piston Rings, Connecting Rod and Crank Shaft, etc. complete in all respect and carry out the Machine Work, Re-metaling, Grinding, Polishing of Crank Shaft and Lapping, Housing, Reaming and Making Valve Seat of Head and Other Component of Head AssemblyStandard size of worn out spares as required, Replacement of Parts and re-assembling after fitting of Parts, fitting of Diesel Engine after found Servceable into the Vehicle, appluing Two Coats of Aluminium Paint after making Surface smooth and applying One Coat of Primer on Exhaust Pipe from Exhaust Valves to Silencer Assembly and Testing after completion (after Running of Engine minimum 8-10 Hours on Static Run) On Full Load, complete all as specified and as directed. NOTE: Spares/ Parts of the Diesel Engine will be Measured and Paid for separately as 'Supply only' here-in-after under item No 2.27 to 2.46. |
| 43 | Supply only Bare Piston Set (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/USHA or as approved. |
| 44 | Supply only Bearing Set for Connecting Rod (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as approved MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved |
| 45 | Supply only connecting Rod Bush Set (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved |
| 46 | Supply only cylinder Liner (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as specified. |
| 47 | Supply only Filter Cartridge Double (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 48 | Supply only Fuel Paper Element (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 49 | Supply only Gasket (Cylinder Head) (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 50 | Supply only Gasket (Cylinder Head Cover) (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 51 | Supply only Gasket Oil Sump Assembly (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 52 | Supply only Gasket Push for Chamber Cover (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 53 | Supply only Inlet & Exhaust Valve (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 54 | Supply only Main Bearing Set (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified.MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 55 | Supply only Oil Pump Gear (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified.MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 56 | Supply only Piston Ring Standard (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 57 | Supply only Thrust Washer set (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 58 | Supply only V Belt Cogged (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 59 | Supply only Valve Guide Exhaust (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 60 | Supply only Valve Guide Inlet (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 61 | Supply only Valve Guide Seal Exhaust (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 62 | Supply only Valve Guide Seal Inlet (as approved/ as per existing) suitable for Diesel Engine of TATA XENON, complete all as specified. MAKE: GOETZE/IPL/TATA GENUINE/USHA or as approved. |
| 63 | M & L for wheel alingment of TATA XENON complete all as specifed & directed |
| 64 | M & L for cleaning of Exhaust pipe assembly and replace of cleaning kit, suitable for TATA XENON , complete all as specified & directed. |
| 65 | Comprehensive maint and servicing and checking of TATA XENON complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage all as specified and directedNote - (i) All spare parts, oil etc items shall be measured and paid Separately under BOQ as supply only |
| 66 | Supply only In Air filter |
| 67 | Supply only In Oil filter. |
| 68 | Supply only In Fuel filter. |
| 69 | Labour only for Vaccum cleaning, polishing, deep cleaning of seats, dash board , door leather, upper body roof of DI. TATA XENON complete all as spefified and directed by Engr-in- Charge. |
| 70 | M&L for Removing wheel Tata XENON complete with tyre and tube, taking out tube repair, puncher of tube and refixing properly complete all specified and directed. |
| 71 | Labour only for computerised wheel alignment , wheel balancing and Wheel Rotation of TATA XENON complete all specified and directed. |
| 72 | Supply and fixing of Horn complete for TATA XENON including wiring connection and fixing complete all specified and directed. |
| 73 | Supply and fixing of brass battery terminal complete all as specified. |
| 74 | M&L for servicing and cleaning of complete cooling system and radiator air passage, coolant passage of radiator core with suitable chemical solution including connected Items all as specified and directed by Engr-in-Charge. |
| 75 | Repair of Eicher 10.60 |
| 76 | Comprehensive maint and servicing and checking of EICHER 10.60 complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage all as specified and directedNote - (i) All spare parts, oil etc items shall be measured and paid Separately under BOQ as supply only. |
| 77 | Supply only In Oil filter. |
| 78 | Supply only In Diesel filter & Water Separator. |
| 79 | Supply only In Air filter. |
| 80 | Supply only In Side door lock. |
| 81 | supply only brake master cylinder piston cup and dust seal. |
| 82 | supply only wheel cylinder piston cup & dust seal. |
| 83 | supply only brake booster packing cup & rubber parts |
| 84 | M & L denting work where needed on complete veh EICHER 10.60 Removing Old paint by scraping, cleaning with caustic soda and making surface even and smooth by applying putty, cutting, polishing all as required and applying one coat of primer and two coat of NC paint by spray painting in separate booth (workshop) as per existing paint/shape by preventing non painting parts (as ordered by Engineer-in-Charge) including application two coats of anti corrosive black paint to flooring both sides of wheel mud guard under courage, wriring veh BA No, firm name complete all as specified & directed. Note :- Colour of paint & writing vehicle BA No & firm Name will be decided by Engineer-in-Charge. |
| 85 | M & L opening/dismantling carefully fuel injection pump from EICHER 10.60 complete servicing/repair/replacement of following unserviceable parts (as approved/as per existing size and Make), Grinding of nozzles complete and refixing the same, testing on completion complete all as specified and dierected :- (a) Bearing/bush - 04 Nos (b) Delivery Valve - 04 Nos, (c) Fuel Pipe Line - 04 Nos, (d) Niddle Valve - 04 Nos, (e) Plunger - 04 Nos Note :- Cost of new parts will deem to be included in the quoted unit rate. |
| 86 | M & L opening dynamo from EICHER 10.60 for servicing/overhauling ( at contractor's workshop) including replacement of carbon bushes, armature winding and bush bearing, re-assembling and fixing to vehicle including testing, complete all as specified and directed.Note :- Cost of materials required for servicing/overhauling and new parts will deem to be included in the quoted unit rate. |
| 87 | M & L opening self stater from EICHER 10.60 for servicing/overhauling at contractor's workshop including replacement of worn out pinion, varnish of coil, repalcement of solenoid switch, carbon bush, armature winding and re-assembling with engine, complete all as specified & directed. |
| 88 | M & L taking out/down the existing clutch system from EICHER 10.60 replacement of clutch plate, pressure plate, withdrawl bearing and fixing to vehicle, testing on completion for smooth working complete all as specified & directed. Note :- Cost of new parts will deem to be included in the quoted unit rate. |
| 89 | M & L taking out front/ rear wheels complete from EICHER 10.60 cleaning, polishing & overhauling of brake system (2x4 No of wheels) by providing new wheel cylinder kit, brake shoe, brake liner, brake pipes complete, cleaning & Polishing of wheel drum, greasing of front and rear wheels bearing, taking out tyres, tubes of each wheels, cleaning of each wheels, cleaning of each wheels/disc/rims and applying two coats of anti-corrosive paint after obtaining a smooth surface, re-assembling of wheels and re-fixing all parts including wheel alignment from authorised dealer. |
| 90 | M & L repairing/ servicing carefully of water pump alongwith waterbody assembly with necessary accessories for EICHER 10.60 replacing unserviceable parts with existing shape/size, re-fitting the same, testing on completion, complete all as specified & directed. Note :- Cost of New parts will deem to be included in the quoted unit rate. |
| 91 | M & L Cabin dash board suitable for EICHER 10.60 complete as per existing size and shape including dismantling existing broken/scrached desh board carefully with all accessories and fittings, complete all as specified & directed. Note :- Cost of New parts will deem to be included in the quoted unit rate. |
| 92 | M & L Front wind glass ( as approved/as per existing size/shape) suitable for EICHER 10.60 checking/servicing of locking system and minor repairing of opening/closing of window glass including taking down/out unserviceable front wind glass by inner board/cover, complete all as specified & directed.Make : EICHER and approved |
| 93 | M & L plastic grill bonnet central assembly ( as approved) suitable for EICHER 10.60 as per existing shape and size opening including dismentaling existing broken plastic grill bonnet central assembly, complete all as specified & directed. Make : EICHER and approved. |
| 94 | M & L Seat covers (as approved /as per existing) suitable for EICHER 10.60 and fixing property including taking down wornout upholstry from vehicle, complete all as specified & directed. |
| 95 | M & L Foot mats, steering covers, clutch, brake & accelerator pedal rubber shoes and other auxiliaries suitable for EICHER 10.60 including removing existing foot mats, steering covers, clutch, brake & accelerator pedal rubber shoes etc. complete all as specified & directed. |
| 96 | M & L Side indicator assembly (front) with cover and lamps of appropriate wattage (as approved/ as per existing size/shape) suitable for EICHER 10.60 including taking down/out unserviceable front side indicator assembly, complete all as specified & directed. |
| 97 | M & L Tail light assembly complete(Brake light/side indicator light/parking light) with lamps of appropriate wattage and suitable for EICHER 10.60 testing on completion including taking down/out unserviceable tail light assembly, complete all as specified & directed. |
| 98 | M & L for fxing side Window glass as per existing shape and size including chrecking/ servicing of locking system and minor repair of opening/closing of window glass for EICHER 10.60 including removing /taking out unserviceable window glass cover,complete all as specified & directed. |
| 99 | M & L WIndow door handle with key & lock -1 No without key -1 No suitable for EICHER 10.60 as per existing size and shape including dismantaling existing broken window door handle carefully,complete all as specified & directed. |
| 100 | M & L Window rear view mirror (as approved/as per existing) suitable for EICHER 10.60 including taking down existing window rear view mirror, complete all as specified & directed. |
| 101 | S & F Fuel Gauge including meter wiring system, suitable for EICHER 10.60 testing on completion including removing existing guage, complete all as specified & directed. |
| 102 | S & F Temp Guage including meter wiring system, suitable for EICHER 10.60 testing on completion including removing existing guage, complete all as specified & directed. |
| 103 | M & L for cleaning of Exhaust pipe assembly and replace of cleaning kit, suitable for EICHER 10.60 complete all as specified & directed. |
| 104 | Labour only for wheel alignment and balancing of EICHER 10.60 complete. |
| 105 | M&L for repairing of Alternator motor EICHER 10.60 complete all as specified |
| 106 | M&L for fuel tank, cleaning of tank, drying and refixing the same on its existing position of EICHER 10.60 complete all as specified and directed by Engr-in-charge |
| 107 | Supply and fixing In replacement Mud guard cover back side of EICHER 10.60 complete. |
| 108 | Supply and fixing in replacement Side indicator, parking light etc with lamp complete as directed. |
| 109 | Supply only In replacement Head Light lamp of EICHER 10.60 complete. |
| 110 | M&L for Repairing of Hose Pipe with clip and rubber Bushing of EICHER 10.60 Complete all as specified and directed by engr-in-Charge. |
| 111 | Repairing of Eicher PRO 2075 E (VMTL) |
| 112 | Comprehensive maint and servicing and checking of EICHER PRO 2075 E(VMTL) complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage all as specified and directedNote - (i) All spare parts, oil etc items shall be measured and paid Separately under BOQ as supply only. |
| 113 | Supply only In Oil filter. |
| 114 | Supply only In Diesel filter & Water Separator. |
| 115 | Supply only In Air filter. |
| 116 | Supply only inside Side door lock. |
| 117 | Supply only brake master cylinder piston cup and dust seal. |
| 118 | Supply only wheel cylinder piston cup & dust seal. |
| 119 | supply only brake booster packing cup & rubber parts |
| 120 | supply only exhaust brake vaccum chamber diaphragm |
| 121 | Labour only for servicing and cleaning of complete cooling system and radiator air passage, coolant passage of radiator core with suitable chemical solution. |
| 122 | Supply and fix in replacement of EICHER PRO 2075 E(VMTL) rear view mirror with rod complete. |
| 123 | Labour only for wheel alignment and balancing of EICHER PRO 2075 E(VMTL) complete. |
| 124 | M&L for repairing of self starter motor EICHER PRO 2075 E(VMTL) complete all as specified. |
| 125 | Supply and fixing In replacement Mud guard cover back side of EICHER PRO 2075 E(VMTL) complete. |
| 126 | Supply and fixing in replacement Side indicator, parking light etc with lamp complete as directed. |
| 127 | Supply only In replacement Head Light lamp of EICHER PRO 2075 E(VMTL) complete. |
| 128 | M&L for Repairing of Hose Pipe with clip and rubber Bushing of EICHER PRO 2075 E(VMTL) Complete all as specified and directed by engr-in-Charge. |
| 129 | Labour only for servicing of EICHER EICHER PRO 2075 E(VMTL) of Dash board & applying polish on dashboard surface for shining and replacement of necessary fasteners, screws, lock etc complete all as specified and directed by Engr-in-charge. |
| 130 | M&L for servicing of fuel tank & DEF Tank cleaninig with pressurized water, drying and refixing the same on its exixting position for smooth and efficient fuctioning of vehicle EICHER PRO 2075 E(VMTL) including replacement of fuel feed pump complete all as specified and directed by Engr- in- Charge. |
| 131 | M&L for seat cover superior quality velvet clothes duly cutting and steaching as per existing in shape and size for EICHER PRO 2075 E(VMTL) complete including fixing of unsv spring, foam with lathariesed clothes for seat all as required complete. |
| 132 | Comprehensive maint and servicing , greasing checking of telescopic ladder mounted over Eicher 2075 E along with replacement of required necessary minor spares such as nut, bolts, fuses, rectifying any type of leakage of oil and testing of ladder under ideal and load conditions all as specified and directed. Note - (i) All spare parts, oil etc items shall be measured and paid Separately under BOQ as supply only. |
| 133 | Emergency Hand Pump |
| 134 | Supply only Suction filter |
| 135 | Supply only Return filter |
| 136 | Supply only breather cap |
| 137 | Supply only hydraulic pump seal kit |
| 138 | Boom rest rubber |
| 139 | Pneumatic pipe 6mm |
| 140 | Toggle switch |
| 141 | Limit Switch |
| 142 | Emergency Stop Switch |
| 143 | Bucket Light 18 W |
| 144 | Platform Light 5 W |
| 145 | REPAIRS TO MARUTI GYPSY |
| 146 | M&L Denting Work where needed on complete Vehicle Maruti Gypsy, Removing Old Paint by scraping, cleaning with caustic soda and making surfaces even and smooth by applying Putty, Rubbing, Cutting, Polishing all as required and applying one Coat of Primer and Two Coats of NC Paint by Spray Painting in separate Booth (Workshop) as per existing Paint/ Shape by Preventing Non Painting Par5ts (as ordered by Engineer-in-Charge) including application Two Coats of Anti Corrosive Black Paint to Flooring both sides of Wheel Mud Guard under Courage, Writing Vehicle BA No, Firm Name, complete all as specified and as directed.NOTE: Colour of Paint & Writing Vehicle BA No & Firm Name will be decided by Eingineer-in-Charge. |
| 147 | M&L Opening Dynamo from Maruti Gypsy for Servicing/ Overhauling (at Contractor's Workshop) including Replacement of Carbon Bushes, Armature Winding and Bush Bearing, Re-assembling and fixing to Vehicle including Testing, complete all as specified and as directed. MAKE: MICO/LUCAS or as approvedNOTE: Cost fo Materials required for Servicing/ Overhauling and New Parts will deem to be included in the Quoted Unit Rate. |
| 148 | M&L Opening Self Starter from Maruti Gypsy for Servicing/ Overhauling at Contractor's Workshop including replacement of worn out Pinion, Varnish of Coil, Replacement of Solenoid Switchk, Carbon Bush, Armature Windinand re-assembling with Engine, complete all as specified and as directed. MAKE: MICO/LUCAS or equivalent as recommended by Manufacturers. |
| 149 | M&L Opening/ Dismantaling Suspension System (Complete) from the Maruti Gypsy and replacement of Front Suspension Complete, Anti-Roll Bars, Rear Suspension complete, Shock Absorbers with necessary Nut, Bolts, Washers etc. complete all as specified and as directed. MAKE: Maruti Genuine or as approved |
| 150 | M&L Opening Complete Window with inner Flap, Locking, Opening (Outer and Inner) Arrangements, Servicing and Minor Repairs for Opening and Closing of Window Mirror including replacement of Locking Button, Window Opening Handle from Inner and Outer Side, Window Mirror up and down Handle for Maruti Gypsy and re-fixing of all Parts, Testing on completion, complete all as specified and as directed.NOTE: New Parts will be as per existing One and as approved by GE/ Engineer-in-Charge. |
| 151 | M&L Repairing/ Servicing carefully of Water Pump alongwith Waterbody Assembly with necessary Accessories for Maruti Gypsy, replacing Unserviceable Parts with existing shape/ size, re-fitting the same, Testing on completion, complete all as specified and as directed. NOTE: Cost of New Parts will deem to be included in the Quoted Unit Rate. |
| 152 | M&L Taking down the exixting Clutch System from Maruti Gypsy, Replacement of clutch Plate (Make: REPCO/ MARUTI GENUINE), Pressure Plate (MAKE:REPCO/TATA GENUINE), Withdrawal Bearing (MAKE:SKF/REPCO/ MARUTI GENUINE) or as approved by GE/ Engineer-in-Charge and fixing to Vehicle, Testing on Completion for Smooth Working, complete all as specified and as directed.NOTE: Cost of New Parts will deem to be included in the Quoted Unit Rate. |
| 153 | M&L Taking down complete Gear Box from Maruti Gypsy by opening, Dismantalling, Tasking out All Parts, cleaning of Serviceable Parts with Petr4ol, Replacement of Unserviceable Parts, Re-assembling Gear Box and Re-Fixing to Vehicle, Testing on completion for the smooth functioning of shifting of all forward and Reverse Gear, complete all as specified and as directed. MAKE: MARUTI GENUINE/ZF or as approvedNOTE:Cost of New Parts will deem to be included in the Quoted Unit Rate. |
| 154 | M&L Taking down Complete Steering System from Maruti Gypsy by Opening/ Dismantalling, Taking Out All Parts, Cleaning of Serviceable Parts and replacemtn of Unserviceable Parts (Steering Column, Tie rod, Spindles, Universal Joints, Pitman Arm, Steering Gear Box Assembly, Drag Link Assembly) and Re-assembling and fixing to Vehicle and Testing and Testing on completion, complete all as specified and as directed. MAKE: MARUTI GENUINE/RANE/ZF or as approved.NOTE: Cost of New Parts will deem to be included in the Quoted Unit Rate. |
| 155 | M&L Seat Covers (as approved/ as per existing) suitable for Maruti Gypsy and fixing properly including Taking down wornout upholstry from Vehicle, complete all as specified and as directed.NOTE: Seat Covers will be as approved by GE/Engineer-in-Charge. |
| 156 | M&L Foot Mats, Steering Covers, Clutch, Brake & Accelerator Pedal Rubber Shoes and other Auxilaries suitable for Maruti Gypsy including removing existing Foot Mats, steering Covers, Clutch, Brake & Accelertator Pedal Rubber Shoes etc complete all as specified and as directed. MAKE: KK/LUCAS/maruti GENUINE |
| 157 | M&L Side Indicator Assembly (Front) with cover and lamps of appropriate Wattage (as approved/ as per existing size/Shape) suitable for Maruti Gypsy including Taking down/out unserviceable Front Side Indicator Assembly, complete all as specified and as directed.MAKE: LUCAS or as approved. |
| 158 | M&L Tail Light Assembly Complete (Brake Light/ Side Indicator Light/Parking Light) with Lamps of appropriate Wattage and suitable for Maruti Gypsy, Testing on completion including taking down/out unserviceable Tail Light Assembly, complete all as specified and as directed. MAKE: KK/LUCAS/MARUTI GENUINE |
| 159 | M&L Window rear View Mirror (as approved/ as per existing) suitable for Maruti Gypsy including taking down existing Window rear View Mirror, complete all as as specified and as directed.MAKE: NEO GOLD/MARUTI GENUINE or as approved. |
| 160 | M&L Wheel/ Tyre Top Plastic Cover with all necessary Fitting (As approved/ as per existing Shape & Size) suitalbe for Maruti Gypsy and Testing on Completion in Running Condition including taking down existing Wheel/ Ture Top Plastic Cover, complete all as as specified and as directed. |
| 161 | Comprehensive maint and servicing and checking of MARUTI GYPSY complete engine / transmission system / suspension system / exhaust system /cooling system / Electrical system and braking system complete greasing of wheel bearings and rectify the minor complaints defects as per manufacturer's recommendations / particular specification including along with replacement of required necessary minor spares such as nut, bolts, fuses tuning and testing of engine under ideal and load conditions and any type of leakage all as specified and directedNote - (i) All spare parts, oil etc items shall be measured and paid Separately under BOQ as supply only |
| 162 | Supply only In Air filter. |
| 163 | Supply only In Oil filter. |
| 164 | Supply only In Fuel filter. |
| 165 | Supply only In Wiper assembly with blade. |
| 166 | Supply only In Head Light 100W/120W Complete. |
| 167 | Supply only In Fog Light 45W/55W Complete. |
| 168 | Supply only In Wind Screen Front . |
| 169 | Supply only In Window glass Superior quality as per make and model Complete. |
| 170 | S&F Alternator (as approved/ as per existing), 12 Volt suitable for Maruti Gypsy including removing existing Alternator, complete all as specified and as directed. MAKE: LUCAS/ MICO or as approved. |
| 171 | M&L Fuel Gauge including meter Wiring System, suitable for Maruti Gypsy, Testing on Completion including removing existing Fuel Gauge, complete all as specified and as directed. MAKE: MARUTI or as approved |
| 172 | M&L Temperature Gauge including meter wiring system, suitable for Maruti Gypsy, Testing on Completion including removing existing Gauge, complete all as specified and as directed.MAKE: MARUTI or as approved |
| 173 | M&L Radiator Assembly Brazed Aluminium Plate & Bar Type with Hoses, Clamps, Radiator Cap as per existing dimensions suitable for Maruti Gypsy, Testing on completion including Taking down Chocked radiator with Hoses, Clamps from the Vehicle, complete all as specified and as directed.MAKE: HEXOL/JODHPUR/STANDard or as approved. |
| 174 | MISC ITEMS FOR ALL TYPES VEHICLES |
| 175 | S&F Banjo Bolt with TWO Aluminium Washers (as approved/ as per existing sample) suitable for ALL TYPES VEHICLES including down/ out existing Banjo Bolt, complete all as specified and as directed. |
| 176 | Supply only In engine Oil (20W40). |
| 177 | Supply only In Engine Oil 15W40. |
| 178 | Supply only In Brake oil of grade dot.3 |
| 179 | Supply only In Gear oil of grade 90 Nos. |
| 180 | Supply only Coolant |
| 181 | Supply only DEF urea |
| 182 | Supply only Hydraulic oil grade S 68 |
| 183 | M&L in replacement battery of existing type 12V 2.5/5AH Make Exide or Equivalent |
| 184 | M&L in replacement battery of existing type 12V 60AH Make Exide or Equivalent |
| 185 | M&L in replacement battery of existing type 12V 100AH Make Exide or Equivalent |
| 186 | S&F Battery cable 50 Sqmm 320 wire made out of copper suitable for ALL TYPES VEHICLES including Taking down/ out existing Battery cable, complete all as specified and as directed. |
| 187 | S&F Mild Steel Nut & Bolt with Washers of different sizes (as approved/ as per existing sample) suitable for ALL TYPES VEHICLES including Taking down/ out existing Nut & Bolts with Washers, complete all as as specified and as directed. MAKE: TVS or as approved. |
| 188 | S&F Reflector or Red Colour Round type of dia 60-90mm suitable for ALL TYPE VEHICLES including Taking out/down Reflector, complete all as as specified and as directed. |
| 189 | Supply & Greasing with Grease LG 280 suitable for ALL TYPE VEHICLES including cleaning old used Grease, complete all as specified and as directed. MAKE: CASTROL/GULF |
| 190 | Supply only old cotton clothes width not less than 1.0 METRE without any Tearing suitable for cleaning of ALL TYPE VEHICLE, complete all as specified and as directed. |
| 191 | Supply only in replacement Measuring jug of capacity 10 ltr complete all specified and directed |
| 192 | Supply only in replacment metal funnel 2.5 ltr capacity GI conical Shape with extra long chute for oil filling in vehicles complete All as specified and directed. |
| 193 | Supply only in replacement hand rotary oil/ diesel pump of stainless steel including transparent PVC hose/pipe approx 3 meter length suitable dia for pump outlet complete all specified and directed |
| 194 | Supply and spreading river sand (fine aggregate) for cushining of POL Barrels at MT yard complete all as specefied and as directed. |
| 195 | Towing of veh from breakdown place to workshop with in 10 KM distance complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender