Tender For Repairing Work Of Bituminous Road From Dewanbosh Bazar To Jogen Barman House Under Barasoulmari Gram Panchayat Within Mathabhanga-Ii Block In The District Of Coochbehar (Length 700.00 M , Width 4.00M )
Tender Value
47.70 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
8 days left
EMD
95418
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Work Of Bituminous Road From Dewanbosh Bazar To Jogen Barman House Under Barasoulmari Gram Panchayat Within Mathabhanga-Ii Block In The District Of Coochbehar (Length 700.00 M , Width 4.00M )
BOQ
| Sl. No. | Item Description |
| 1 | Water Bound Macadam Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniformthickness, hand packing, rollingwith3wheeledsteel/ vibratory roller 8-10 tonnes in stages toproper gradeand camber,applying and brooming requisite type of screening/bindingMaterials tofillup the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404).By Manual Means Grading-2 (Table 400-9) (ii)(b) Using Screening (Table 400-10) Type-B (11.2 mm aggregate) |
| 2 | Prime Coat Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming toIS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502).i)On WMM/WBM surface @ 0.70-1.0kg/sqm. |
| 3 | Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).ii)On Granular surface treated with primer @ 0.25kg-0.30 /sqm. |
| 4 | Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504).ii)for Grading 2 (19 mm nominal size) |
| 5 | Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On bituminous surface @ 0.20kg-0.3kg /sqm. |
| 6 | Open - Graded Premix Surfacing Providing, laying and rolling of open-gradedpremix surfacingof 20mmthicknesscomposedof13.2 mmto 5.6mmaggregates either using viscosity grade bitumen of approved grade to required line,gradeandlevel toserveaswearingcourse on a previously prepared base, includingmixinginasuitable plant, laying and rolling with a smoothwheeled tandemor other approved type roller 8-10 tonne capacity, finishedtorequiredlevel andgrade (ReferencetoMORT&H's specification clause 510)10.(1) Case-I:Mechanicalmethodusing approvedgradeBitumenandHMPof appropriate capacity not less than 75 tonnes/hour . |
| 7 | Seal Coat (Type B) Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511). 12(ii)Case - II : Type B rovidingandlayingofpremixsandsealcoat withHMPusingapproved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. |
| 8 | Direction and Place Identification Signs with size more than0.9 sqmsize Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of high intensity gradesheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm supported on a mildsteel angle iron post 75mmx75mmx6mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M15grade cement concrete 45cmx 45cmx60cm, 60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). |
| 9 | Road Distance Indicator Reinforced cement concrete M15 grade kilometre stone of standarddesign as per IRC:8-1980, fixing in position including painting andprintingetc(ReferencetoMORT&H's specification 805).14(ii)Ordinary kilometer stone (precast) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender