Tender For Fire Hydrant System At Rubber Park- Irapuram General Civil Work
Tender Value
3.87 Crore
Estimated cost
Bid Submission
13 Nov 2026
5 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
8850
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fire Hydrant System At Rubber Park- Irapuram General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Civil works |
| 2 | OD380902/2025-2026Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : Horizontal type, multistage, centrifugal, end suction type pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. 120HP Squirrel cage induction motor, TEFC, synchronous speed 2950 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class F insulation, conforming to IS-325. M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. 3750 lpm at 90 m head. |
| 3 | OD390384/2025-2026Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal end suction type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP,1800RPM water cooled with radiator diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, exhaust pipe extended upto 10 m outside pump house duly insulated with 50mm thick glass wool with 1.0 mm thickaluminium sheet cladding, residential silencer, instruments and protection asper standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (with 24 volt battery and 100 ltr capacity fuel tank made with MS sheet) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. 3750 lpm at 90m Head |
| 4 | OD380901/2025-2026Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal end suction type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirel cage induction motor TEFC type suitable for operation on 415volts,3phase 50Hz AC supply with IP55 class of protection for enclosure, horizontal foot mounted type with Class F insulation,conforming to IS : 325. M.S. fabricated Common base plate, coupling, couplingguard, foundation bolts etc. as required. 2280 lpm 65m head |
| 5 | OD380896/2025-2026Supplying and fixing air vessel made of 250mm dia, 8mm thick MS sheet, 1200mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25mm dia gunmetal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 6 | OD380897/2025-2026Providing and fixing of pressure switch in GI pipe line including connection etc. as required |
| 7 | OD380898/2025-2026Pressure Gauge: Supply, installation, testing, and commissioning of a 150 mm dial Bourdon tube pressure gauge conforming to IS 3624, with a range of 0 to 15 kg/sqcm and an accuracy of +/- 1% of full scale. The gauge shall be provided in a weather proof aluminum or stainless steel case with shatter-proof glass and a 0.5 inch BSP bottom connection, with internal parts made of stainless steel or brass. Each unit shall be complete with a 3-way gauge cock for isolation and calibration and an MS or SS syphon pipe to protect against pressure surges, including all necessary fittings and calibration. The installation shall ensure reliable monitoring of system pressure in full compliance with NBC and IS standards for fire protection systems. |
| 8 | OD380904/2025-2026Providing laying, testing and commissioning of B class heavy duty GI Pipeconforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nut bolts, gaskets etc. above ground including welding and painting with red epoxy paint etc. of following sizes complete as required. 150 MM. Cement concrete block support to be provided as extra |
| 9 | OD380894/2025-2026Providing laying, testing and commissioning of B class heavy duty GI Pipeconforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. above ground including welding and painting with red epoxy paint, etc. of following sizes complete as required. 200MM. Cement concrete block support to be provided as extra. |
| 10 | OD43962/2026-2027Providing laying, testing and commissioning of B class heavy duty GI Pipeconforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. above ground including welding and painting with red epoxy paint, etc. of following sizes complete as required. 250MM. Cement concrete block support to be provided as extra. |
| 11 | OD380906/2025-2026Providing laying, testing and commissioning of B class heavy duty GI Pipeconforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. above ground including welding and painting with red epoxy paint etc. complete as required. 100 MM. Cement concrete block support be provided as extra. |
| 12 | OD380908/2025-2026Providing laying, testing and commissioning of B class heavy duty GI Pipeconforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. above ground including welding and painting with red epoxy paint, excluding excavation etc. complete as required 80 MM. Cement concrete block support to be provided as extra. |
| 13 | OD5787/2026-2027Providing laying, testing &commissioning of 'B' class heavy duty GI Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. above ground including welding, and painting with red epoxy paint, following sizes complete as required :50 mm |
| 14 | OD380921/2025-2026Supplying, fixing, testing & commissioning of double flanged CI sluice valve of rating PN1.6 with non rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 250MM |
| 15 | OD407138/2025-2026Supplying, fixing, testing and commissioning of double flanged CI sluice valve of rating PN1.6 with non rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :150 mm |
| 16 | OD380922/2025-2026Supplying, fixing, testing and commissioning of double flanged CI sluice valve of rating PN1.6 with non rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 200MM |
| 17 | OD380926/2025-2026Supplying, fixing, testing and commissioning of double flanged CI sluice valve of rating PN1.6 with non rising spindle, bronze/gunmetal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 100 MM |
| 18 | OD392645/2025-2026Supplying, fixing, testing and commissioning of Float valve CI body with SS arm, spindle and float ISI marked complete with nuts, bolts, washers,gaskets of following sizes as required :200mm |
| 19 | OD380930/2025-2026Providing, installation, testing and commissioning of CI non-return valve offollowing sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100 MM |
| 20 | OD380931/2025-2026Providing, installation, testing and commissioning of CI non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :200 MM |
| 21 | OD380932/2025-2026Providing, installation, testing and commissioning of CI non-return valve offollowing sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.asrequired : 250 MM |
| 22 | OD380933/2025-2026Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6mm thick stainless steel, Grade304, sheet with 3mm dia holes with stainless steel flange. 250MM |
| 23 | OD380936/2025-2026Supplying, fixing, testing and commissioning of CI butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 MM |
| 24 | OD383554/2025-2026Supplying, fixing, testing and commissioning of CI butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 MM |
| 25 | OD380937/2025-2026Supplying, fixing, testing and commissioning of CI butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 MM |
| 26 | OD380939/2025-2026Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe |
| 27 | OD383517/2025-2026Foot valve: Supplying, installing, testing, and commissioning of cast iron ball type foot valve with flanged ends, complete with required flanges, nuts, bolts, washers, and gaskets. The valve shall be suitable for installation at the suction end of the draw out connection to prevent backflow and maintain line priming. Internally epoxy coated for corrosion resistance, pressure rating PN 1.6, conforming to IS standards, and complete in all respects as per project specifications. Size: 100 mm dia |
| 28 | OD383518/2025-2026Draw out connection: Supplying, installing, testing, and commissioning of draw-out connection assembly comprising heavy-duty cast iron/ductile iron body with 150 mm flanged outlet for direct connection to the fire water tank/pump suction line. The assembly shall be provided with a gunmetal/stainless steel male instantaneous coupling (63 mm) for hose connection, complete with necessary fittings, isolation valve, and strainer to ensure controlled withdrawal of water from the tank. Internally epoxy-coated for corrosion resistance, designed for reliable operation in fireprotection systems, and complete in all respects as per IS standards and project specifications. |
| 29 | OD383519/2025-2026Tank Filling inlet :Supplying, installing, testing, and commissioning of tank filling inlet assembly comprising heavy-duty cast iron/ductile iron body with flanged end connection, suitable for direct connection to the fire water storage tank. The inlet shall be provided with a gunmetal/stainless steel male instantaneous coupling (63 mm) for hose connection, terminating into a 150 mm flanged outlet to the tank. The assemblyshall include necessary fittings, non-return valve, and strainer to ensure controlled filling, prevent backflow, and protect against debris entry. Internally epoxy-coated for corrosion resistance, complete in all respects as per IS standards and project specifications |
| 30 | OD42127/2026-2027Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. ( The tail pieces if required will be paid separately):200 mm dia nominal bore |
| 31 | 18.60.2Providing and fixing enclosed type water meter (bulk type) conforming to IS: 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. ( The tail pieces if required will be paid separately):100 mm dia nominal bore |
| 32 | OD392230/2025-2026Providing laying, testing and commissioning of B class heavy duty GI Pipeconforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. under ground including welding, anticorrosive treatment with coaltar/asphalt tape as per IS10221, following sizescomplete as required:150MM |
| 33 | OD392231/2025-2026Providing laying, testing and commissioning of B class heavy duty GI Pipeconforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. under ground including welding, anticorrosive treatment with coaltar/asphalt tape as per IS10221, following sizescomplete as required : 100 MM |
| 34 | 1 OD10129/2026-2027supply and installation of a wet-type Alarm Check Valve assembly constructed from high-quality Ductile Iron (ASTM A536) with a fusion-bonded epoxy coating for enhanced corrosion resistance, featuring a maximum operating pressure of 17.5 Bar (250 PSI) and available in flanged or grooved configurations, complete with a retard chamber, water motor gong, alarm pressure switch, and all necessary trim components in accordance with standard NBC and IS 15105 specifications. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender