Tender For Repair Work Of Public Toilet In Front Of Vikas Bhawan On Delhi Road.
Tender Value
2.54 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
16 days left
EMD
25416
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saharanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Work Of Public Toilet In Front Of Vikas Bhawan On Delhi Road.
BOQ
| Sl. No. | Item Description |
| 1 | M.S. or Iron work of small sizes and section such as holding down bolts, hold fast, the rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. M.S. Grills/Stair case railing/gates/trusher/racks etc. SI NO. 502 A |
| 2 | White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 3 | supply and fixing of C.P brass 15 mm dia angle valve in all complete |
| 4 | supply and fixing ofBib cock 15mm dia in all complete |
| 5 | supply and fixing of C.P brass long Bib cock 15 mm dia angle valve in all complete |
| 6 | supply and fixing of C.P step cock 15 mm dia angle valve in all complete |
| 7 | supply and laying of 40mm dia in all complete. SOR NO. 21.01 |
| 8 | Providingand fixingP.V.C.wastepipe for sink or wash basin including PVCwaste fittings complete. SOR NO.-21.24 |
| 9 | site clerence |
| 10 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming 10 to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White glazed earthen ware(Indian |
| 11 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 12 | Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varmish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked.641+642 |
| 13 | 13 12MM Thickb 1:4 cement finesand & mortar SI NO.584 |
| 14 | Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.t for each coat of water proof cement paint after the first two coat to give |
| 15 | 15 Cement Concrete with 4cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plantsetc. required for proper completion of the work (a)Same as above Item no.279 but with 2cm. gauge stone grit instead of 4 cm. gauge. SOR SI NO.279A |
| 16 | 16 Supply and fixing 6 mm. (%\\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry. jointing and polishing complete, including supply of all materials, labour and Tools and Plants. si no. 628 |
| 17 | 17 supply and fixing of led blub 60watts 250v/50hz in all complete work |
| 18 | 18 supply and fixing of wiring and condout pipe withELETRIC BOARD complete |
| 19 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank 12701 marked (Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-inlicharge. |
| 20 | 20 R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5;3 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.slabs in 1:1.5:3. SI NO 284A |
| 21 | 21 M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.SI NO. 504/AR |
| 22 | 22 M.S. or iron work @50 KG/Sqm |
| 23 | Add 18%GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender