Tender For Construction Of Store Cum Aes Office At Vilangad Shep
Tender Value
12.32 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
9 days left
EMD
30900
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Store Cum Aes Office At Vilangad Shep
BOQ
| Sl. No. | Item Description |
| 1 | Details of work |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavatedearth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. in All kinds of soil. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 3.0 m, over and above initial lift of 1.50m, disposed earth to be levelled and neatly dressed. in All kinds of soil. |
| 4 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement :2 course sand (zone-III):4graded stone aggregate 20mm nominal size) |
| 6 | Supplying and filling quarry muck in trenches of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.50m |
| 7 | Providing and laying in position specified grade of Cement concrete ,excluding the cost of centering,shuttering.All work upto plinth level. 1:3:6 (1cement:3 coarse sand:8 graded stone aggregate 40mm nominal size) |
| 8 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level: Concrete of M25 grade |
| 9 | Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth and upto floor V level : Concrete of M25 grade |
| 10 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 11 | Centering and shuttering including strutting,propping etc. and removal of form for suspended floors,roofs,landings etc. |
| 12 | Centering and shuttering including strutting,propping etc. and removal of form for lintels,beams,plinth beams etc. |
| 13 | Centering and shuttering including strutting,propping etc. and removal of form for Columns,Pillars,Abutments ,Piers etc. |
| 14 | Steel reinforcement for RCC work including strightening,cutting, bending,placing in position and binding all complete.Thermo-Mechanically Treated bars of grade Fe500D or more. |
| 15 | Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge |
| 16 | Providing and fixing aluminium work for doors,windows,ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and shape,including necessary filling up the gaps at junctions,ie at top,bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth,rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading, glazing/paneling, C.P.brass/stainless steel screws,all complete as per architectural drawings and the directions of Engineer-in-charge(Glazing,paneling and dash fasteners to be paid seperately) |
| 17 | For shutters of doors ,windows,ventilators including providing and fixing hinges/pivots and making provision fixing of hinges wherever required including the cost of EPDM rubber/neoprene gasket required (filling shall be paid for seperately)-Polyester Powder coated Aluminum (minimun thickness of polyester powder coating 50 micron) |
| 18 | Providing and fixing glazing in aluminium door,window,ventilator shutters and partitons etc.with EPDM rubber/neoprene gasket complete as per architectural drawings and directions of Engineer-in-charge--with float glass panes of 5.5mm thickness. |
| 19 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. |
| 20 | Plastering using 9mm cement of mix 1:3(1cement,3 fine cement) including all cost of materials,labour charges etc.complete |
| 21 | Plastering using 12mm cement plaster of mix 1:4 (1 cement:4 fine sand) including all cost of materials,labour charges etc.complete |
| 22 | Providing water cutting: 12mm thick plain cement mortar bands in cement mortar 1:4(1cement,4 fine sand) at 2.5 cm wide -raised band |
| 23 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 800x800 mm |
| 24 | Finishing walls with Deluxe multi surface paint system for interiors and exteriors using primer as per manufactures specifications -Two or more coat applied on walls @1.25 Ltr/10m2 over and including one coat of special primer applied @0.75 Ltr/10m2) |
| 25 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10mm gap for thermal expansion:-110 mm diameter pipe. |
| 26 | Providing and fixing on wall face unplasticised-PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10mm gap for thermal expansion:-110 mm bend |
| 27 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 28 | Providing and laying ceramic glazed floor tiles of size 300x300mm(thickness to be specified by manufacturer) of Ist quality conforming to IS:15622 of approved make,in all colours, shades except white,ivory,gray,fume red brown,laid on 20mm thick cement mortar 1:4(1 cement 4 coarse sand) including pointing the joints with white cement and matching pigment etc.complete |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles (thickness to be specified by manufacturer) of Ist quality conforming to IS:15622 of approved make,in colours ,shade except burgundy,bottle green,black of any size as approved by Engineer-in charge,in skirting,risers of steps and dados,over 12mm thick cement mortar 1:3(1 cement 3 coarse sand) and jointing with grey cements [email protected]/m2 including pointing the joints with white cement and matching pigment etc.complete |
| 30 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below(tolerance +1mm) with wall thickness 2.0 mm(+0.2 mm),corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S tube of size 19x19 mm and 1mm (=0.1mm) wall thickness and 3 nos. stain,ess steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer in charge: Extruded section profile size 48x40 mm |
| 31 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2mm(±0.2mm) with inbuilt edging on both sides.The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (±0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (for WC and Bath room door shutter) |
| 32 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 33 | Providing and fixing mirror of superior glass(of approvedquality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing:-Rectangular shape 453x357mm |
| 34 | Providing and fixing PVC pipes,fittings including fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.63mm pipe 6kgf/cm2-External work-Exposed on wall |
| 35 | Providing and fixing PVC pipes,fittings including fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.110mm pipe 6kgf/cm2-External work-Exposed on wall |
| 36 | Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Bend |
| 37 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipe,including jointing with PVC solvent cement-110 mm dia Vent Cowl |
| 38 | Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 x 110 x 110 mm dia Door Tee |
| 39 | Supplying and fixing 100mm PVC floor trap including all labour charges etc |
| 40 | Providing and fixing PVC pipes,fittings including fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.Concealed work,including cutting chases and making good the wall etc.20mm pipe 10kgf/cm2 |
| 41 | Providing and fixing CP Brass bib cock of approved quality conforming to IS 8931-15mm nominal bore |
| 42 | Providing and fixing wash basin with C.I brackets,15mm C.P brass pillar taps,32mm C.P brass waste of standard pattern,including painting of fittings and brackets,cutting and making good the walls wherever require:-White vitreous China wash basin size 550x400mm with a pair of 15mm C.P.brass pillar taps. |
| 43 | Supplying and fixing CP health faucet good quality including cost of materials, labour charges etc. complete as per the direction of site engineer in charge. |
| 44 | Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)2. 15 to below 25 flush capacity |
| 45 | Providing and fixing Stainless steel shower rose with 15 or 20 mm inlet (100 mm diameter) with shower arm including shower cock of good quality. |
| 46 | Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling&testing of joints complete as per direction of Engineers-in-charge-50mm dia 6 kgf/cm2- |
| 47 | Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement, trenching, refilling&testing of joints complete as per direction of Engineers-in-charge-63mm dia 6 kgf/cm2- |
| 48 | Providing and fixing PVC pipes,fittings including fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.32mm pipe 10kgf/cm2-External work-Exposed on wall |
| 49 | Providing and fixing PVC pipes,fittings including fixing the pipe with clamps at 1.0m spacing.This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.20mm pipe 10kgf/cm2-Internal work-Exposed on wall |
| 50 | Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long, weighing not less than 88 gms |
| 51 | Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge. |
| 52 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 53 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm |
| 54 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) |
| 55 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender