Tender For Tirupathur District - Construction Of Multipurpose Building Near Phc In Arangaldurugam Panchayat At Madhanur Block Under Mlacds(Ambur) -2026-2027
Tender Value
9.87 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
16 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vellore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tirupathur District - Construction Of Multipurpose Building Near Phc In Arangaldurugam Panchayat At Madhanur Block Under Mlacds(Ambur) -2026-2027
BOQ
| Sl. No. | Item Description |
| 1 | Tirupathur District - Construction of Multipurpose Building Near PHC in Arangaldurugam Panchayat at Madhanur Block under MLACDS(Ambur) -2026-2027 |
| 2 | Earth work excavation and depositing on bank with in initial lead of 10 mand initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B |
| 3 | Supply and Filling with M-sand for foundation including cost and conveyance of all materials to work site and all labour charges etc complete |
| 4 | Supplying and filling of conveyed earth with a lead of 1Km for basement filling |
| 5 | Cement Concrete in 1 : 4 : 8 mix using 40 mm metal including cost and conveyance of all materials to site and labour charges etc complete |
| 6 | Brick work in cement Mortor 1:5 (One cement and five sand) using second class Bricks of size 23 x 11.5 x 7.5 cms for the following including mixing mortar and all other labour charges etc complete. |
| 7 | Supplying and errecting shuttering including necessary support for plane surface including all R.C.C Works etc., Complete.(For columns upto grade beam) |
| 8 | Supplying and errecting shuttering including necessary support for plane surface including all R.C.C Works etc., Complete.(For columns above basement) |
| 9 | R.C.C. 1:1.5:3-using 20mm ISS HBGS metal including cost and conveyance of materials and labour charges etc. complete |
| 10 | Supplying, fabricating and placing in position inild steel or ribbed tor steel and all reinforced cement Concrete works as per the design given including cost of steel and binding wire in all floors etc complete complying with Standard (MS rods or RTS rods) which will be supplied departmentally at section stores and cost will be recovered at issue rate. The binding wire shall be supplied by the Contractor. |
| 11 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 12 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 13 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 14 | Plastering with C. M 1:5 mix, 12 mm thick including cost and conveyance of all materials to site and labour charges etc complete. |
| 15 | Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum |
| 16 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 17 | Dadooing of walls with colour glazed tiles of size 300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete. |
| 18 | Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete |
| 19 | Painting two coats using ready mixed Plastic Emulsion paint inlcuding priming coat and cost and conveyance of paint and all labour charges etc complete |
| 20 | Painting two coats over new iron work using synthetic enamal paint including cost and conveyance of all materials to site etc complete |
| 21 | Towards the supply of steel Doors1 (Door 1.00 X 2.10 m) |
| 22 | Towards the supply of steel Doors2 (Door 0.90 x 2.10 m) |
| 23 | Towards the supply of steel Windows (Window- 0.90x1.30 m ) |
| 24 | Towards the supply of steel (Ventilater- 1.20 X 0.60m) |
| 25 | Towards the supply of steel (Ventilater- 0.90 X 0.60m) |
| 26 | Towards the labour charges for fixing steel Doors etc complete |
| 27 | Towards the labour charges for fixing steel Windows and Ventilators in position etc complete |
| 28 | Supplying and errecting pull and push type rolling shutter with ISI make of approved size and section using 18GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers , transportation charges etc., Gear operatied type (from 8sqm to 12sqm area) |
| 29 | Towards labour charges for Fixing of Rolling shutters including all charges etc., all complete |
| 30 | Supply and fixing of swing ventilators with frames and fixed in position in accordance with standard drawings and standard specification |
| 31 | Supplying & Fixing in position of Indian type Water closet 580x440mm including cost and conveyance of all materials to site and all labour charges etc complete. |
| 32 | Supplying and fixing of cuddapah slab 50mm thick including all charges etc., all complete |
| 33 | Supplying and fixing of Rain Water Pipe 110mm pvc pipe including all charges etc., all complete |
| 34 | Light point SD no20 |
| 35 | Fan point SD no20 |
| 36 | S & F of fan SD 110 |
| 37 | Plug point SD 36 |
| 38 | Tube light fiitings SD 88 |
| 39 | CFL SD no 80 |
| 40 | DPIC Switch 500V SD 154 |
| 41 | Service pipe SD no 70 |
| 42 | Service connection SD no 64 |
| 43 | BHF with CFL SD no 83 |
| 44 | S & F of TNEB meter board SD no 125 |
| 45 | Rcc Rings |
| 46 | Rcc Cover Slab |
| 47 | 500 lit sintex tank |
| 48 | 32mm PVC Pipe |
| 49 | 32mm PVC Bend |
| 50 | 25mm PVC Pipe |
| 51 | 25mm PVC Elbow |
| 52 | 25mm PVC Tee |
| 53 | Pvc Tap |
| 54 | Providing of Name board |
| 55 | GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender