Tender For Addition/Alteration For Provn Of Toilet In Bldg No. P-616 At Hq 14 Inf Div Under Ge, Clement Town, Dehradun.
Tender Value
9.67 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
20 days left
EMD
19340
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration For Provn Of Toilet In Bldg No. P-616 At Hq 14 Inf Div Under Ge, Clement Town, Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm and making good disturbed portion to match existing surfacescomplete all as specified and directed |
| 3 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed |
| 4 | Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc. |
| 5 | M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed |
| 6 | Material and labour for 75 mm thick plain cement concrete type D-2, 1:4:8 (Using 40mm graded stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge. |
| 7 | M & L for 25 mm thick PCC 1:2:4 type B1 (20 mm graded aggregate) as in sub base to flooring complete all as specified and as directed by Engr-in-charge. |
| 8 | M&L for Matte finish glazed vitrified tiles 10mm thick (600x1200mm DGVT smoke grey dark), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 9 | M&L for Glazed Vitrified tiles in vertical surfaces (600X 1200X 10mm thick, Super Gloss Taurus black marble) set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 11 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.11 Sqm but n. exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and directed. |
| 12 | All as per item No 11 above but in skirting over and including 10 mm thick plaster in cement mortar 1:4 including necessary cutting of tiles as required size all as specified and as directed. |
| 13 | M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed |
| 14 | M&L for RCC (nominal mix) Type A-1 1:1.5 :3 (using 20mm graded Aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span on walls complete all as specified and directed |
| 15 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc fair finished of concrete. |
| 16 | Material and Labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 17 | M&L for mild steel TMT bars 06mm to 08mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed Please Enable Macros to View BoQ information |
| 18 | M&L for mild steel TMT bars 06mm to 08mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender