Tender For Addition/Alteration To Bldg No T/60 And T/63 At Afs Bagdogra Under Ge (Af) Bagdogra
Tender Value
42.97 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
27 days left
EMD
85940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Bldg No T/60 And T/63 At Afs Bagdogra Under Ge (Af) Bagdogra
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings including ridge complete all as specified and directed. |
| 2 | M&L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick (Camouflage pattern) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 3 | M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick (Camouflage pattern) of any colour having tensile strength of 550 Mpa as in roof ridge, valley gutter, covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling wrought iron or steelwork of any description and any places complete all as specified and directed. |
| 5 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality- A Fe complete all as specified and directed. |
| 6 | M&L Bands, straps, supports or stays for rainwater, ventilating pipe, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps, hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming toFe-290 Gde-E-165 complete all as specified and directed. |
| 7 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 8 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 9 | M&L anodised aluminium snap grid frame work for false ceiling of grid size 605X605 mm panel with hangers 4 bore. G.I. (upto 1200mm length) adjusting level fixed to roof slabs/roof truss by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5bore. 40mm long complete as per manufacturer's instructions including fixing of nut, bolt and clamps with the help of drilling machine complete all as specified and directed. |
| 10 | M&L for non asbestos, fibre cement reinforced board high pressure steam cured (Design-Oceanic or approved),pre painted seif finished white/ivory colour, 4mm thick size (595mmx595mm) board fixed or laid/inserted to aluminium/M.S frame work with screws if required all as per specification and drawing or all as per manufacture's instructions complete all as specified and directed. NOTE: Aluminium snap grid frame work shall be measured and paid separately) |
| 11 | Demolition of (un reinforced) Cement Concrete in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 12 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 13 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including bituminous gap filling necessary form work, complete all as specified and directed. |
| 14 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floor etc incl finishing the surface even & rough to receive screeding complete all as specified and directed. |
| 15 | M&L for Vitrified tiles (Double Charge) light shade 8-10 mm thick area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floor laid over and including 15mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 16 | M&L for Vitrified tiles (Double Charge) light shade 8-10 mm thick area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting/vertical surface laid over and including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 17 | M&L Machine cut kota stone slab flooring 20 -25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified including rubbing and polish complete all as specified and directed. |
| 18 | M&L Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 10mm thick rendering in CM 1:4 etc. set and jointed in neat cement slurry and pointed including rubbing and polish complete all as specified and directed. |
| 19 | M&L for joint free non skid coloured ceramic floor tiles of size of tile exc. 0.18 but n.exc.0.38 sqm each 7-8 mm thick as in floor laid over and including 15mm thick screed bed in CM 1:6, set, jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 20 | M&L for joint free colour glazed ceramic wall tiles of size 450x300/600x300 x 6-7mm thick on vertical surfaces laid over and including for rendering 10mm thick in CM (1:4) on vertical surface of wall cement screed bet set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 21 | M&L chequered coloured cement concrete tiles 30cmx30cmx25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment in floor over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 22 | Taking down chowkhat or frame with shutters without taking of shutters from frames not exc 1.5 Sqm each incl making good disturbed portion complete all as specified and directed. |
| 23 | Taking down chowkhat or frame with shutters without taking of shutters from frames exc 1.5 Sqm but not exc 4.00 sqm each incl making good disturbed portion including removing to store complete all as specified and directed. |
| 24 | M&L powder coated aluminium sliding window shutters 25 mm thick with frames ( consisting of 02 Nos glazed shutters and 01 No gauge shutter) , 3 track sliding shutters, duly fitted with neoprene beading, glazing clips, locking device, heat absorbing glass 4.0 mm nominal thickness in glazed shutters, stainless steel wire mesh of 0.254mm nominal dia of wire and 0.95 mm average width of aperture in gauged shutter and powder coated aluminium grill 4mm bore, 75 x 75mm aperture fixed with standard aluminium beading fixed in outer portion of the chowkat complete all as specified and directed. |
| 25 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 26 | M&L powder coated Anodised aluminium window & ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long (2 nos) suitable handle 1 No complete all as specified and directed. |
| 27 | M&L for 4 mm thick frosted glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane fixed with neopune rubber gasket in aluminium frame work complete all as specified and directed. |
| 28 | M&L for Granite (of any type) tiles 15-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in CM 1:6, including grinding and polishing complete all as specified and directed. |
| 29 | M&L pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete size of frame 125mm X 60mm complete all as specified and directed. |
| 30 | M&L 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate including necessary fixing lugs, stainless steel hinges, locks strike plate etc complete all as specified and directed. |
| 31 | M&L 35mm thick factory made flush shutters, solid core construction with particle board core and ply wood face panels, commercial type on both sides and fitted to chowkat complete all as specified and directed. |
| 32 | M&L 35mm thick factory made second class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkat complete all as specified and directed. |
| 33 | M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, S&F in opening as per specification & drawings complete all as specified and directed. |
| 34 | M&L Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 35 | M&L stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed. |
| 36 | S&F 100 mm Butt hinge Stainless steel and fixed complete all as specified and directed. |
| 37 | S&F 200mm long aluminium anodised tower bolt of extruded section and fixed, complete all as specified and directed. |
| 38 | S&F 300mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixed clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast- aluminium alloy and fixed complete all as specified and directed. |
| 39 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised complete all as specified and directed. |
| 40 | S&F 300mm , steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 41 | S&F 25 mm bore, fancy type stainless steel drapery rod (curtain rod) complete all as specified and directed. |
| 42 | S&F 25 mm bore stainless steel, 304 grade decorative type bracket and side cups for curtain rods fixed with screws complete all as specified and directed. |
| 43 | Taking down cement plaster of any description on brick work or stone masonry walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 44 | M&L 15 mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement on wall complete all as specified and directed. |
| 45 | M&L 15 mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair without using extra cement with using WPC 3% by weight (for 5mm thickness) of cement on wall complete all as specified and directed. (WPC shall be measured separately) |
| 46 | Supply only liquid water proofing compound complete all as specified and directed. |
| 47 | M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed. |
| 48 | M&L preparation of newly plastered surfaces of wall and applying two coats of Weather proof Exterior Emulsion paint for camouflage design over a coat of suitable primer on walls incl necessary scaffolding complete all as specified and directed. |
| 49 | M&L for complete removal of existing treatment of old external wall surfaces and applying two coats of exterior weather coat for camouflage design incl necessary scaffolding complete all as specified and directed. |
| 50 | M&L for complete removal of existing treatment of surfaces and applying 1.5mm thick Birla or equivalent wall putty to old plastered surface and applying two coats of 1st quality acrylic distemper (ready mixed) on wall complete all as specified and directed. |
| 51 | M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed. |
| 52 | M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 53 | M&L for preparation of old painted surfaces of wooden of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 54 | Taking down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 55 | M&L for cutting chasing pinning in making good to facing where required for concealed water tubing etc n. exc 10 cm girth in brick wall complete all as specified and directed. |
| 56 | Supplying and laying of 20mm CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floor complete all as specified and directed. |
| 57 | S&F in repair white vitreous China wash down water closet pan (pedestal) pattern, and trap (excluding) fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and directed. |
| 58 | S&F in repair, Vitreous china, Sqatting pan, 'Orissa Pattern', size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including 100mm bore ‘P’ or ‘S’ trap and provision of cement concrete bedding and connected to existing flush pipe complete all as specified and directed. |
| 59 | S&F in repair vitreous china pedestal wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 bore, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 bore PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 60 | S&F in repair Vitreous China Half Stall urinal flat back, size of 600 x 395 x 365 mm white, Urinal spreader with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 61 | S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed. |
| 62 | S&F in repair, 15 mm bore chromium plated fancy type angle valve with elegant knob screwed down high pressure, with crutch or butter fly handle screwed for iron pipe or for unions complete all as specified and directed. |
| 63 | S&F in repair, 15 mm bore chromium plated fancy type long boby bib taps with crutch or buttrfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 64 | S&F in repair, 15 mm bore chromium plated fancy type pillar tap for WHBs with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 65 | S&F in repair Health faucet (ABS Body) steelchromium plated suitable for 15 bore pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 66 | S&F in repair, CP soap dish fixed to wall with screw complete all as specified and directed. |
| 67 | S&F in repair 125 mm chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 68 | S&F in repair,18 to 20 bore Aluminium anodised tubular towel rail, D type, 60 cm long between flanges fixed with brass screws complete all as specified and directed. |
| 69 | S&F in repair, PVC connection 15 mm bore and 450 mm long with 2 Nos PTMT nuts with washers complete all as specified and directed. |
| 70 | S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with steelchromium plated or aluminised hinging device complete all as specified and directed. |
| 71 | S&F 600 mm x 450 mm size bevelled edge mirror of selected quality glass, 5.50 mm thick, mounted on 6mm thick AC pain building board or commercial plywood and fixed to wall with wooden plugs and chromium plated brass screws & cup washers complete all as specified and directed. |
| 72 | S&F in repair, sheet glass shelf glass assembly consisting of 5.0mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with chromium plated brass screws complete all as specified and directed. |
| 73 | Dismantling water tanks exc 500 and not exc 1000 ltrs capacity and removing to store complete all as specified and directed. |
| 74 | S&F 1000 litres capacity PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and directed. |
| 75 | S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. |
| 76 | S&F in repair 20mm bore gate valve with iron wheels head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 77 | S&F in repair 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 78 | S&F in repair 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 79 | S&F in repair, for 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 80 | S&F in repair 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 81 | S&F in repair PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 82 | S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 83 | S&F in repair 75mm bore PVC (SWR) Bend radius any radius complete all as specified and directed. |
| 84 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 85 | S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and directed. |
| 86 | S&F in repair PVC (SWR) multi floor trap with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 87 | S&F chromium plated grating 125 mm bore complete all as specified and directed. |
| 88 | S&F chromium plated urinal spreader for fixing with urinal inlet pipe complete all as specified and directed. |
| 89 | Demolition of brickwork built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 90 | M&L for Brick work with fly ash old size bricks , straight or curved on plan to any radius built in cement mortar 1:6 complete all as specified and directed. |
| 91 | M&L for Brick work with fly ash old size bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed. |
| 92 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed. |
| 93 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed. |
| 94 | M&L for providing reinforced cement concrete Nominal Mix Type B1 1:2:4 using (20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floor, roof, complete all as specified and directed. |
| 95 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick rough finished in flat surface complete all as specified and directed. |
| 96 | M&L Formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete rail ings, openings in concrete walls, floor and roof n exc 20 cm wide and sides of RCC/PCC bands in walls, horizon tal or sloping and similar work exc 5 cm but n exc 10cm wide (rough finished surface) complete all as specified and directed. |
| 97 | M&L for TMT bars 10 bore and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including steelwire (annealed) not less than 0.9 bore or securing with clips etc complete all as specified and directed. |
| 98 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soft/loose soil etc complete all as specified and directed. |
| 99 | Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 100 | Taking down copper /aluminium point wiring (Light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 101 | Taking down old unsv light fittings of any type/box type complete with glass shade & lamp complete all as specified and directed. |
| 102 | Taking out old unsv /existing MCB DB SPN/TPN complete by disconnecting complete all as specified and directed. |
| 103 | Taking out old unsv /existing MCB SP/SPN/TPN complete by disconnecting complete all as specified and directed. |
| 104 | Taking down old unsv sub main wiring with 2runs/4runs of 4/6/10 sqmm aluminium cables complete all as specified and directed. |
| 105 | M&L for Point wiring complete with1.5 sqmm single core PVC insulated FRLS cable 1100 volt grade unsheathed with multistranded copper conductor drawn through and including PVC rigid non metallic conduit with all fittings such as bend, end caps etc fixed in concealed in wall, ceiling, roof etc by means of suitable fixing accessories including provision of 1.5 sqmm single core PVC insulated FRLS cable 1100 volt grade with multistranded copper conductor for earth continuity conductor, fabricated branded modular metal flush box concealed in walls with modular white cover plate with frame for housing of modular type switches socket outlets fan regulators complete all as specified and directed for point wiring. (a)One light point/bell point controlled by one one way 5 Amp switch. |
| 106 | All as per item No 105 above, but One Fan/Exhaust point controlled by one one way 5 Amp switch and regulator complete all as specified and directed. |
| 107 | All as per item No 105 here-in-before, One 3 pin socket out let 05 Amps on independent board complete all as specified and directed. |
| 108 | All as per item No 105 here-in-before, but One 3 pin socket out let 05 Amps on same board complete all as specified and directed. |
| 109 | All as per item No 105 here in before, but using 2.5 Sqmm single core copper conductor cable of multithreaded PVC insulated unsheathed 1100 Volt grade connected point including running of 2.5 Sqmm copper conductor PVC wire as earth continuity conductor alongwith wiring and connecting to the common earth dolly complete all as specified and directed. |
| 110 | S&F for Switch modular type, bearing ISI mark, single pole one way 6 Amps complete all as specified and directed. |
| 111 | S&F for Modular socket 2/3 pin multi purpose 6 Amps, bearing ISI mark, flush type complete all as specified and directed. |
| 112 | S&F for Modular socket multipurpose 2-in-1 ,3/5 pin 16 Amps, bearing ISI mark, flush type universal complete all as specified and directed. |
| 113 | S&F for Modular switch 16 Amps, bearing ISI mark, flush type universal complete all as specified and directed. |
| 114 | S&F For Modular fan regulator, bearing ISI mark step type 120W 2 module complete all as specified and directed. |
| 115 | S&F for ceiling rose surface circular type made of PVC 5 mm thick bearing ISI mark type three terminal complete all as specified and directed. |
| 116 | M&L for sub main wiring complete with 2 runs of 6 sqmm, single core, PVC insulated, unsheathed FRLS cable,1100 volt grade, multi stranded with copper conductor, drawn through and including suitable size of PVC conduit pipe and accessories on surface/wall/ roof etc. with one run of PVC insulated, 6 sqmm FRLS cable, copper conductor for earth continuity conductor complete all as specified and directed. |
| 117 | M&L for sub main wiring complete with 2 runs of 4 sqmm, single core, PVC insulated, unsheathed FRLS cable,1100 volt grade, multi stranded with copper conductor, drawn through and including suitable size of PVC conduit pipe and accessories on surface/wall/ roof etc. with one run of PVC insulated, 6 sqmm FRLS cable, copper conductor for earth continuity conductor complete all as specified and directed. |
| 118 | S&F MCB,DB TPN 8 way with 250 A rated copper bus bar in SS enclosure vertical double door type complete all as specified and directed. |
| 119 | S&F MCB,DB SPN 12 way with 200 amps rated copper bus bar in SS enclosure double door type complete all as specified and directed. |
| 120 | S&F MCB,DB SPN 8 way with 200 amps rated copper bus bar in SS enclosure double door type complete all as specified and directed. |
| 121 | S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20amp 240 V complete all as specified and directed. |
| 122 | S&F MCB TPN 415 volt 100 amps with 10KA breaking capacity complete all as specified and directed. |
| 123 | S&F MCB SPN 240 volt 63 amps with 10KA breaking capacity complete all as specified and directed. |
| 124 | S&F MCB SPN 240 volt 40 amps with 10KA breaking capacity complete all as specified and directed. |
| 125 | S&F MCB SP 240 volt 0-32 amps with 10KA breaking capacity complete all as specified and directed. |
| 126 | S & F surface and wall mounted LED battern ,extruded Aluminium housing with poly carbonate diffuser tube light fitting of capacity 20W including all connected items complete all as specified and directed. |
| 127 | Material and labour Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 128 | S&F LED Building security light 35 Watts made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP 66 protection and impact resistance of IK07W including connecting up with PVC sheathed 1.5 Sqmm 3 Core copper conductor flexible wire and GI Bracket fixing in wall and complete all as specified and directed. |
| 129 | S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 130 | S&F exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers including suitable hole in existing wall complete as per site requirement and complete all as specified and directed. |
| 131 | S&F 9/12 watt LED light fitting wall mounting fixture (sketch type) including B-22 LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cable from ceiling rose to connector of the light complete including removing unserviceable light fittings complete all as specified and directed. |
| 132 | S&F in repair, service bracket of mild steel pipe 25 mm bore medium grade of length 0.70 mtr fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm bore bolts with nuts and washer and suitable reducer for connecting fitting to GI pipe as required at site including two coats of synthetic enamel paint over one coat of red oxide primer on mild steel work complete all as specified and directed. |
| 133 | NOTES :-1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender