Tender For Beautification Of Parks And Construction Of Roads And Drains In Pushpanjali Dwarika Township, Ward No. 06, Mathura.
Tender Value
1.58 Crore
Estimated cost
Bid Submission
19 Nov 2026
12 days left
EMD
3.18 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Beautification Of Parks And Construction Of Roads And Drains In Pushpanjali Dwarika Township, Ward No. 06, Mathura.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift up to 1.5 m, as directed by Engineer-in-Charge: All kinds of soil |
| 2 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 5 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | Providing, laying spreading & compacting of granular sub base (GSB) by providing close graded (Fr-1) materials, sprading in uniform layers with Mortor Graded on prepared surface, mixing by mix I n placed method with Rotovater at OMC and compacting with in layers with smooth wheeled Vibratory Roller to achieve the desired density, complete as per MoR &H clause 401& as directed by Engineer Incharge including all machine charges & including all labour, T& P etc req for proper completion of work. Analysis rate |
| 7 | Supply & Laying of precast concrete Block ( Interlocking tiles) for paving of thickness 100mm rubber mould GREY (Compressive strength not less then 30Mpa as specified in IS:15658 and weight 4.50kg) as jindal,naval or equivalant Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as specified in IS 15658:2006. as directed by E/I |
| 8 | Supply & Laying of precast concrete Block ( Interlocking tiles) for paving of thickness 100mm rubber mould GREY (Compressive strength not less then 30Mpa as specified in IS:15658 and weight 4.50kg) as jindal,naval or equivalant Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as specified in IS 15658:2006. as directed by E/I |
| 9 | Supply & Laying of precast concrete Block ( Interlocking tiles) for paving of thickness 60mm rubber mould GREY (Compressive strength not less then 30Mpa as specified in IS:15658 and weight 4.50kg) as jindal,naval or equivalant Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as specified in IS 15658:2006. as directed by E/I |
| 10 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats. |
| 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. DSR 2023 I.NO 10.2 |
| 12 | Cartage of dismentled material 5km distance |
| 13 | Providing 50mm thick precast cement concrete Jali 1:2:4 (1 Cement : 2 Coarse sand: 4 graded stone aggregate 6mm nominal size), reinforced with 1.6mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. |
| 15 | Suppy and instalation of See-Saw two seater item Code No SS-01 (make by royal Amusements) or equivalent quality as directed by E/I. MR |
| 16 | Suppy and instalation of designer straight slidder (8 feet) item Code No SD-06D (make by royal Amusements) or equivalent quality as directed by E/I .MR |
| 17 | Suppy and instalation of Swing 2 seater item Code No SW-02 (make by royal Amusements) or equivalent quality as directed by E/I . MR |
| 18 | Supply and fixing R.C.C. sleeper/batton moulded bench, required as per direction of Engg I/C. Including fixing with necessary nuts and bolts in proper possition. (Analysis rate) |
| 19 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). |
| 20 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 21 | Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift All kinds of soil Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender