Tender For Construction Of A New Building And A Boundary Wall At K.V. Dumar In Kon Development Block. Length: 150 Meters.
Tender Value
42.20 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
6 days left
EMD
4.11 Lakhs
Bank guarantee accepted
Document Fee
2720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A New Building And A Boundary Wall At K.V. Dumar In Kon Development Block. Length: 150 Meters.
BOQ
| Sl. No. | Item Description |
| 1 | Building workEarth work in Excavation by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drain ( not exceeding 1.5 m in width or 10 sqm on plain ), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, width in a lead of 50 m.DSR Sl.No. 2.8.1 |
| 2 | Providing and in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 ( 1 cement:4 coarse sand (zone !!!) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources ) DSR Sl.No. 4.1.8 |
| 3 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of cenering, shuttering, finishing and reinforcement- all work up to plinth level 1:1.5:3 ( 1cement:1.5 coarse sand(zone!!!) derived from natural sources :3 graded stone aggregate 20 mm nominal size derived from natural sources ) DSR Sl. No. 5.1.2 |
| 4 | Brick work withcommon brunt clay ( non modular ) bricks of class -150 in foundation and plinth in cement mortar 1:4 ( 1 cement:4 coarse sand ) as per DSR Sl. No -6.1.1 |
| 5 | Excavating supplying, stacking and filling of local earth (Including Royality ) by mechanical transport up to a lead of 5 km also including ramming and watering of earth in layers not exceeding 20 cm in foundation trenches, sides of foundation etc. complete for all lift DSR 2.25(a) |
| 6 | Treetment of soil under existing floors, using chemical , emulsion @ 1.00 liter per hole , 300 mm apart including drilling 12 mm diameter hols and plugging with cement mortor 1:2(1 cement :2 coarse sand ) to match the exsiting floor as per DSR Sl .no. 2.35.3.1:( with chlorphriphos / Lindane E.C 20% with 1% concentration |
| 7 | Brick work withcommon brunt clay ( non modular ) bricks of class -150 in foundation and plinth in cement mortar 1:4 ( 1 cement:4 coarse sand ) as per DSR Sl. No -6.1.1 |
| 8 | Brick work withcommon brunt clayF.P.S. ( non modular ) bricks of class -designation 7.5 insuperstructure above plinth level up to floor V level in all shapes and sizes in cement mortor 1:6 ( 1 cement:6 coarse sand ) i as per DSR Sl. No -6.4.2 |
| 9 | Reinforcd cement concrete work walls ( any thickness), including attached pilasters, buttresses, plinth and string courses, fillet, columns, pillars, pier, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 ( 1cement 1.5 coarse sand ( zone!!!) derived from natural sourses :3 graded stone aggregate 20 mm nominal size derived from natural sourses) DSR Sl . No. 5.2.2 |
| 10 | Reinforcd cement concrete work in beams, supended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding cost of centering , shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement:1.5 coarse sand (zone!!!) derived from natural sources :3 graded stone aggregate 20 mm nominal size derived from natural sources ) DSR Sl. No. 5.3 |
| 11 | Steel Reinforcment for RCC work including straightening cutting, bending in position and binding all complete upto plinth level . Thermo-Mechanically Treated bars of grade Fe-500D or more DSR Sl No 5.22.6 |
| 12 | Centering and shuttering including shutting, propping etc. and removal of from for Foundations, footings, bases of columns, etc. for mass concrete DSR Sl. No.5.9.1 |
| 13 | Centering and shuttering including shutting, propping etc. and removal of from for Lintels, beams,plinth beams, girders,bressumers and canilevers DSR Sl. No. 5.9.5 |
| 14 | Centering and shuttering including shutting, propping etc. and removal of from for Suspended floors, roof, landings, balconies and access plateform DSR Sl. No.5.9.3 |
| 15 | 12 mm cement plaster of mix: 1:6 ( 1 cement:4 coarse sand ) DSR Sl. No. 13.4.1 |
| 16 | 12 mm cement plaster of mix: 1:6 ( 1 cement:6 coarse sand ) DSR Sl. No. 13.4.2 |
| 17 | 15 mm cement plaster on rough side of half brick walls of mix: 1:6 ( 1 cement:6 coarse sand ) DSR Sl. No. 13.5.2 |
| 18 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of pannels and finishing the groove complete as per specification and direction of the Engineer-in-charge :15 mm wide and 15 mm deep groove DSR Sl. No. 13.73.1 |
| 19 | Providing and laying vitrified ttiles in floor in different size ( thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours &shades, laid on 20 mm thick cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigment etc, complete . Size of Tile 600x600 mm DSR Sl.No. 11.41.2 |
| 20 | Providing and laying vitrified tiles in different size ( thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shades,in skirting, riser of steps, over 12 mm thick bed of cement mortor1:3 (1 cement:3 coarse sand ) jointing with grey cement & matching pigment etc @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigment etc, complete . Size of Tile 600x600 mm DSR Sl.No. 11.46.2 |
| 21 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR Sl. No. 13.80 |
| 22 | Finishing Walls with Acrylic Smooth exterior paint of required shade : New work ( Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre /10 sqm ) DSR Sl. No. 13.46.1Two coats |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. DSr- 13.41.1 |
| 24 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). DSR- 9.53 |
| 25 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. DSR- 9.48.1 |
| 26 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle section of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x5 mm flat piees to the existing T-iro frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-in-charge.DSR Sl.No. 10.31 |
| 27 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded /mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. wo track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (Zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body. sing R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) (Height above 1.8m). DSR- 9.147.A2.2 |
| 28 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : (a) 35 mm thick Single leaf DSR 9.21.1 |
| 29 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. DSR- 10.30.1 |
| 30 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (a) 250mm x 16 mm . As per SI 9.62.1 |
| 31 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 250mm x 10mm. SI 9.63.1 |
| 32 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 125 mm. As per SI 9.66.1 |
| 33 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. As per SI No- 14.34 |
| 34 | Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on New work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per DSR Sl. No. 13.62.1 |
| 35 | Providing and fixing M.S. fan clamp Type 1 or !! Of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs during laying, including painting the exposed portion of loop, all as per standard design complete DSR Sl. No. 10.17 |
| 36 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. DSR- 11.3.1 |
| 37 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. DSR- 11.13 /2 |
| 38 | Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing, stair case railing and similar works, including applying priming coat of approved steel primer M.S. tube Sl. Mo.10.26.1 |
| 39 | Chequrred precast cement concrete tiles 22 mm thick in foothpath & courtyar, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortor 1:4 ( 1 cement :4 coarse sand ) Light shade pigment using white cement DSR Sl. No. 11.20.1 |
| 40 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 Leaving 10mm gap for thermal expansion (!) Single socketed pipes 110 mm diameter as per DSR Sl No 12.41.2 |
| 41 | Providing and fixing on wall ACP Exterior Cladding. |
| 42 | Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand). DSR- 6.23 |
| 43 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. DSR- 11.38 |
| 44 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR- 8.31 |
| 45 | Finishing Walls with Acrylic Smooth exterior paint of required shade : New work ( Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre /10 sqm ) DSR Sl. No. 13.46.1Two coats |
| 46 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). DSR- 9.53 |
| 47 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : (a) 35 mm thick Single leaf DSR 9.21.1 |
| 48 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 250mm x 10mm. SI 9.63.1 |
| 49 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 125 mm. As per SI 9.66.1 |
| 50 | Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on New work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per DSR Sl. No. 13.62.1 |
| 51 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Light shade pigment using white cement. DSR- 11.20.1 |
| 52 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 Leaving 10mm gap for thermal expansion (!) Single socketed pipes 110 mm diameter as per DSR Sl No 12.41.2 |
| 53 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR- 17.1.1 |
| 54 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid . DSR- 17.2.1 |
| 55 | Boundary wallClearing grass and removal of rubbish up to a distance of 50 m out side the periphery of the arae cleared.DSR Sl. No.2.32 |
| 56 | Earth work in Excavation by mechanical means ( Hydraulic excavator ) / manual means in foundation trenches or drain ( not exceeding 1.5 m in width or 10 sqm on plain ), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, width in a lead of 50 m. DSR Sl.No. 2.8.1 |
| 57 | Supply and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete DSR Sl. No. 2.27 |
| 58 | Providing and in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 ( 1 cement:4 coarse sand (zone !!!) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources )DSR Sl.No. 4.1.8 |
| 59 | Coursed Rubble Masonary (2nd short ) with hard stone in foundation and plinth with Cement mortar 1:6 ( 1 cement :6 coarse sand ) DSR Sl. No. 7.7.1 |
| 60 | Providing and Laying in position specfied grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:1.5:3 ( 1 cement:1.5coarse sand ( zone-!!!) derived from natural sources :3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR Sl. No. 5.1.2 |
| 61 | Reinforced cement concrete work in wall (any thickness ) including attached pilasters, buttesses, plinth and string course, fillet, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 ( 1 cement:1.5 coarse sand(Zone !!!) derived from natural sourses:3 graded stone aggregate 20 mm nominal size derived from natural sources) DSRSl.No. 5.2.2 |
| 62 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1cement:1.5 coarse sand ( zone !!!) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) DSR Sl. No. 5.30 |
| 63 | Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth. Thermo-Mechanically Treated of grade Fe-500Q or more DSR Sl. No. 5.22.6 |
| 64 | Cenering and shuttering including strutting, propping etc. and removal of from for Foundation, footing, base of column, etc for mass concrete DSR Sl. No.5.9.1 |
| 65 | Cenering and shuttering including strutting, propping etc. and removal of from for Lintels, beams, plinth beam, girders, bressumers and cantilevers DSR Sl. No.5.9.5 |
| 66 | Cenering and shuttering including strutting, propping etc. and removal of from for Columns, Pillars, Piers, Abutments Posts and Struts DSR Sl. No.5.9.6 |
| 67 | Half brick masonary with common burnt clay F.P.S. (non modular) bricks of class designation 7.50 in superstructure above plinth level up to floor V level Cement Mortar 1:4 ( 1 cement : 4 coarse sand ) DSR 6.13.2 |
| 68 | cement Plaster ( Coarse sand ) 12 mm thick cement plaster of mix: 1:4 (cement : Coarse sand ) Sl. No. 13.4.1 |
| 69 | 15 mm thick plaster on rough side of single or half brick wall ofmix: 1:4 ( 1cement : 4 coarse sand )Sl. No.13.5.1 |
| 70 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of pannels and finishing the groove complete as per specification and direction of the Engineer-in-charge :15 mm wide and 15 mm deep groove DSR Sl. No. 13.73.1 |
| 71 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 Leaving 10mm gap for thermal expansion (!) Single socketed pipes 110 mm diameter as per DSR Sl No 12.41.2 |
| 72 | Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets, gates and similar work Sl. No.DSR 10.25.2 |
| 73 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two ro more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR Sl. No. 13.62.1 |
| 74 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR Sl. No. 13.80 |
| 75 | Finishing wall with smooth exterior paint of required shade: New work ( Two or more coat applied @ 1.67 ltr /10 sqm over and including primiing coats of exterior primer applied @ 0.90 litre/10 sqm) DSR Sl. No. 13.46.1 |
| 76 | cement Plaster ( Coarse sand ) 12 mm thick cement plaster of mix: 1:6 (cement : Coarse sand ) Sl. No. 13.4.2 |
| 77 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: DSR 13.47.1 |
| 78 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture DSR 13.48.3 |
| 79 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and alllevels ete. including: DSR 8.32 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender