Tender For Deposit Work(Running Work) In Sub Division Haidergarh Under Edd Haidergarh.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
5 days left
EMD
30000
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barabanki → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Deposit Work(Running Work) In Sub Division Haidergarh Under Edd Haidergarh.
BOQ
| Sl. No. | Item Description |
| 1 | Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki / JE Store to site of work. |
| 2 | PCC Pole /STP Pole 8.5/9/11/13 Mtr long |
| 3 | PCC Pole 11 Mtr long |
| 4 | 33/11kv Pin Insulator . |
| 5 | 33/11kv Disc Insulator . |
| 6 | 33/11kv X-ARM |
| 7 | MS Earthing Rod |
| 8 | Transformer 25/63/100 KVA |
| 9 | Transformer 250 KVA |
| 10 | ABC Cable 3x50SQ. MM. |
| 11 | ABC Cable 3x95 SQ. MM. |
| 12 | ABC Cable 3x120 SQ. MM. |
| 13 | ABC Cable 1x25+1x16 SQ. MM. |
| 14 | 33/11 KV XLPE Cable 3x70++3x120+3x185,3x300 sqmm |
| 15 | ACSR Weasal Conductor/dog /rabit |
| 16 | LT D.B. Box |
| 17 | 11 KV CT/PT Unit |
| 18 | 33/11 KV VCB |
| 19 | 11 KV Metering Cubical/pilfer |
| 20 | Stay Set Complete |
| 21 | Other Line Material |
| 22 | Dragging of pole from JE Dump Store to site |
| 23 | Grouting of Pole in depth of 1/6th the length of pole in ratio 1:4:8 in cement sand and brick ballast and construction of pole plinth 300mmx45mm above ground level in 1:2:4 in cement, coarse sand and stone grit as per respo norms. |
| 24 | Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc. |
| 25 | Stringing and sagging of 11 KV line with ACSR Weasal/dog/rabit Conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department) |
| 26 | Pipe Earthing ( Boring type 60 Feet) |
| 27 | Installation of Mounting of Following capacity of Transformer including its connection between 11 KV and LT Line mounting provinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) |
| 28 | Mounting of 25/63/100 KVA Tranformer |
| 29 | Mounting of 250 KVA Tranformer |
| 30 | Installation of fixing 11 KV CT/PT with required meterial. |
| 31 | Installation of fixing 11 KV Pilfer Unit with required meterial. |
| 32 | Errection of Substation type double pole with PCC /STP 8.5/9/11/13 Pole Mtr. Long . including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt, fitting of 33/11 KV pin & Pin insulator. |
| 33 | Errection of Substation type four pole with PCC /STP 11 Pole Mtr. Long . including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt, fitting of 33/11 KV pin & Pin insulator. |
| 34 | Errection of single PCC /ST Pole for Stringing, jumpharing and sagging of conductor 1/6 of total length of poles |
| 35 | Stringing and Sagging of LT 1x16 ABC Cable (LT ABC Cable will be provided by the department) |
| 36 | Stringing and Sagging of LT 3x50 ABC Cable (LT ABC Cable will be provided by the department) |
| 37 | Stringing and Sagging of LT 3x95ABC Cable (LT ABC Cable will be provided by the department) |
| 38 | Stringing and Sagging of LT 3x120ABC Cable (LT ABC Cable will be provided by the department) |
| 39 | Installation of D.B. Box |
| 40 | Earthing of pole with MS Earthing. |
| 41 | Provinding & Fixing of various type materials. All materials shall be supplied by the contractor. |
| 42 | Nut & Bolt |
| 43 | PG CLAMP |
| 44 | j - hook with clamp |
| 45 | Dead End clamp |
| 46 | suspension clmap |
| 47 | Lugs DIffrent size |
| 48 | Clamp for Top/ Dropper and T-off2/Stay/LT clamp /F-clamp GI PIPE CLAMP etc. |
| 49 | GI Pipe 3\\"&4'' DIA |
| 50 | D.O fuse set |
| 51 | basing angle |
| 52 | L T Insulator |
| 53 | Looping and Choopping of tree branches in laying on the route of line. |
| 54 | Laying of 33/1111kv XLPE Cable 3x70, 120,185,300 Sq. By MM Manually/Drill Method |
| 55 | 11 KV XLPE Cable 3x70++3x120 hanging with pole |
| 56 | felling and heat treatment of cable box |
| 57 | Wairmesh fencing of 11/.04 kv substation shall be made recatangular off size as per site requirment fabrication 45x45x5mm angle .. (All the material will be arranged by the contractor) |
| 58 | Construction of massionry type transformer plinth of sutable size. (All the material will be arranged by the contractor at his own cost). |
| 59 | Construction of LT Distribution Cum LT Protection Box in Rectangle Shape made of MS Angle For Installation of Henley Type Tailness Fuse Unit 300/500 AMP 650 Volt 3 nos Outgoing Circuits With 4 Nos.Bus Bar Proper Grouting of Structure by digging of pits with the help of cement, coresand and aggregate in the ratio 1:3:6 and fabrication of structure complete. |
| 60 | Fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc. |
| 61 | Looping of cable and mounting of pole. |
| 62 | hiting and felling cable box |
| 63 | Gaurding of 11 KV Line |
| 64 | Dismentaling of 11 KV Line & poll |
| 65 | Othar line work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender