Tender For (T2023-306-1586) providing Gwss To Harizan Basti Sub Village Dapach Machinal Kargru In G.P. Kirti Tehsil Kumarsain Distt. Shimla H.P. (Sh:- Construction of Reinforced Cement Concrete Storage Tank Of 20000 Ltrs Capacity) repair maintenace
Tender Value
3.69 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
9 days left
EMD
7400
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for (T2023-306-1586) providing Gwss To Harizan Basti Sub Village Dapach Machinal Kargru In G.P. Kirti Tehsil Kumarsain Distt. Shimla H.P. (Sh:- Construction of Reinforced Cement Concrete Storage Tank Of 20000 Ltrs Capacity) repair maintenace
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in Drains and channels etc. in earth work including dressing of side and bed and disposing of excavated earth upto a lead 20metres and lift upto 1.5 metres disposed earth to be levelled and neatly dressed |
| 2 | Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agg. 40mm nominal size)and curing complete excluding cost of form work in :- a) Foundation and plinth. |
| 3 | Providing and laying cement concrete work 1:1.5: 3(1cement:1.5 sand:3 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 4 | (I) P/L CC 1:1.5:3 in Fondations footings bases of columns and mass concrete. |
| 5 | Walls (any thickness) but not less than 0.10 m thickness) attached pillasters, buttresses,plinth and string courses etc. from top of foundation level upto floor two level. |
| 6 | Providing and laying cement concrete work 1:2:4(1cement:2sand:4 graded stone agg. 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- |
| 7 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level. |
| 8 | Providing Form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring , shuttering, strutting & propping etc. with wooden battens & ballies, height of propping & centring below supporting floor to ceiling not exceeding 4 mtrs.& removal of the same for insitu reinforced concrete & plain concrete work in. |
| 9 | Vertical surfaces such as walls (any thickness) partitions & the like I/c attached pillasters, buttresses plinth and string courses and the like : |
| 10 | Flat surface such as walls (any thickness) partitions partitions and the like including attached pilasters, buttresses, plinth and sting courses and the like including carriage of material with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 11 | Edge of slabes and breaks in floors and walls under 20 cm wide. |
| 12 | Providing mild steel/ Tor Steel reinforecment for RCC work including bending, binding and placing in position complete upto floor two level including carriage of material with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 13 | Providing and laying no fine conc. 1:6 (1 Cement: 6 Sand) and curing complete excluding cost of form work in RCC work. |
| 14 | Providing and pouring in horizontal layers filtering media duly graded screened, washed and cleaned as specified by the Engineer-in-Charge. |
| 15 | Broken stone size 50 mm to 75 mm. |
| 16 | Supplying and fixing of GI manhole cover using angle iron frames and GI Sheet cover with locking arrangement size 455*610 mm rectanglular complete. |
| 17 | Providing, laying and jointing in treches galvanised mild steel tube (light grade) (Earth work to be measured and paid for separately). |
| 18 | 40 mm dia. |
| 19 | 32 mm dia. |
| 20 | P/F brass full way wheel valve with wheel of following size. |
| 21 | 32 mm dia. |
| 22 | Providing and fixing Gun Metal Gate Valve ordinarily split, tapere edge, non rising spindle gate valves of classs-I for cold service (temp not exceeding 45 degree C) screwed type as per IS778-1984 in 25 mm dia (ISI Marked). |
| 23 | 32 mm dia. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender