Tender For Supplying And Erecting 16/9 Mtr Highmast.Pole With Led At Diff.Places In Prabhag No.12.Dhule.
Tender Value
19.99 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
6 days left
EMD
20000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhule → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supplying And Erecting 16/9 Mtr Highmast.Pole With Led At Diff.Places In Prabhag No.12.Dhule.
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and erecting 16 m (clear height) motorized high-mast (Top-150mm,Bottom- 360mm) hot dipped galvanized material with average minimum thickness65 micron, made from high tensile structure grade steel as per BSEN -10025 S355/E350 & 3 mm thickness, with base plate 25 mm thick x OD 520 mm grade asper IS-2062, pole made in single section & submerge arc welded, with lowering &raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction5mm, SG-DG U clamps, double drum winch assembly 350 kg, 5x2.5 sq.mmflexible copper cable with lantern carriage assembly suitable for max. 12 nosluminaries and its control gear box, lightning arrestor, arrangement for fixingaviation light, night glow reflector on pole at suitable height, high-mast withserial number, factory inspection report/test report of high-mast should beprovided as per specifications on provided foundation J type stud/bolts withdouble check nuts & necessary accessories complete. specification no. OHPL/HM (8-2-2) |
| 2 | Supplying and erecting outdoor stand mounted feeder pillar for high-mast ofthe same manufacturer with 63A TPN MCB incomer, 24hr astronomical timeswitch with minimum 5 Years battery backup, 45 A TP contactor for automaticswitching of luminaries, 2 no 9A contactors and raise/lower push button, andprovision for termination of adequate size of incoming and outgoing cablescomplete erected in min. 14 SWG CRCA sheet box powder coated withsupporting angles, self lock, gasket and slanting top erected on CC foundationcomplete.(8-2-24) |
| 3 | Supplying and erecting integrated LED flood light fitting Max. 155W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with Ushaped bracket with minimum 2 Years warranty as per specification No. FGODF/FL.(2-4-17) |
| 4 | Supplying & erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulatedwire laid in provided conduit/trunking/inside pole/bus bars or any other placesas per specification no. WG-MA/BW (1-3-6) |
| 5 | Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable, 1100 V 4 core 35 sq. mm. aluminiumconductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL (7-1-31) |
| 6 | Providing & erecting epoxy straight through joint outdoor/indoor for LTXLPE armoured cable 25 to 50 sq mm., with necessary material as perspecification No. CB-JT/LT (7-4-2) |
| 7 | Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. for enclosing XLPEarmoured cable on wall/pole as per specification no. CB-CE(7-6-1) |
| 8 | Supplying and laying (including excavation of suitable width & depth up to 90 cm)75 mm outside dia. double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, complete.(7-6-10) |
| 9 | Supplying & erecting cast iron cable indicator plate buried along with route ofcable for PVC / XLPE armoured cable as per specification No. CB-CIP (7-8-1) |
| 10 | Supplying & erecting crimping type copper lugs for cable 35 sq mm completeas per specification No. CB-CL/CU (7-9-3) |
| 11 | Making M-20 cement concrete foundation by considering the safe soil bearingcapacity at site as 10 T/sq.m at 2m depth including excavation and fixing providednut bolts with the help of template, duly plastered as per design complete (for 16mraising lowering high mast).(16-3-13) |
| 12 | Supplying, installing and testing earthing with galvanised iron earth plate size60 x 60 x 0.6 cm complete with all accessories of GI materials & recording theresults as per specification No. EA-EP (9-1-1) |
| 13 | Supplying, installing and testing pipe type earthing with 40mm. dia. G.l. pipe or20 mm dia. G.I. Rod complete with all accessories of GI materials & recordingthe results as per specification no. EA-EP (9-1-4) |
| 14 | Supplying and erecting rolled steel joist (girder) pole 125 x 70 mm (13.3 kg/m)with base plate in provided foundation as per specification no. OH-PL/RSJ (8-1-10) |
| 15 | Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulatedwire laid in provided conduit/trunking/inside pole/bus bars or any other placesas per specification no. WG-MA/BW (1-3-1) |
| 16 | Supplying and erecting Street light bracket for erection of side entry fitting onpole with 40 mm. dia. ‘B’ grade G.I. pipe of required length complete as perspecification no. FG-BKT/SLB (2-7-9) |
| 17 | Supplying and erecting integrated LED street light fitting 60W IP65 & IK08class having single piece pressure die-cast aluminium housing, having systemlumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70,CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuiltsurge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including drivercomplete with minimum 2 Years warranty as per specification No. FG-ODF/SL.Make Crompton (2-4-5) |
| 18 | Supplying and erecting all aluminium stranded conductors 7/2.21 mm.complete. (Gnat) (73.77kg/km) as per specification No. OH-CON/AAC (8-4-2) |
| 19 | Supplying and erecting all aluminium stranded conductors 7/3.10 mm.complete. (Ant.) (145.0 kg/km) as per specification No. OH-CON/AAC (8-4-5) |
| 20 | Supplying & erecting MS pole bracket for guarding/LT OH line, fabricatedfrom angle iron 50x50x6mm and 550mm long for necessary nos. of providedinsulators, and erecting on pole with 50x6mm clamp complete as perspecification no. OH-PL/BKT (8-3-1) |
| 21 | Supplying and erecting pin type LT medium insulator 100mm x 62mm dia.with suitable G.l. spindle, nut, bolts complete.(8-5-1) |
| 22 | Supplying and erecting G.I. stay set for poles, including loop insulators atinaccessible height with anchor plate 300x300x6mm., straining screws, G.l. staywire 7/10 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected inprovided cement concrete foundation complete. (8-6-1) |
| 23 | Making Cement concrete foundation including excavation (60 x 60 x 150)cmdeep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45)cm /45cmdia. x 45cm height plinth duly plastered, with necessary curing and finishingcomplete. (above 6m to 9m poles) (16-3-3) |
| 24 | Making Cement concrete foundation including excavation (60 x 60 x 150)cmdeep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curingand finishing complete.(for stay). (16-3-6) |
| 25 | Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm diawith 4.5 x 3.65 x 3.25 mm thickness (5+2+2 m ) length respectively and total9 m long with pole cap, base plate in provided foundation (weight 113 kg) as perspecification no. OH-PL/STP (8-1-3) |
| 26 | Supplying and erecting integrated LED flood light fitting Max. 100W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs at L70B50 including driver with Ushaped bracket with minimum 2 Years warranty as per specification No. FGODF/FL..Make Crompton (2-4-15) |
| 27 | Supplying and erecting iron work, sheet metal work consisting of MS sheets,various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc.for panel board or any other purpose with bending, cutting, drilling and weldingcomplete erected at the position with necessary materials duly painted withone coat of red oxide and two coats of enamel paint to match the switchgears oras per directions by the site engineer.(6-1-19) |
| 28 | Add 18% GST |
| 29 | Add 1% Insurance Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender