Tender For Providing Of Ladies/ Gents Toilets At Various Location At 27Ed Af Station Palam Under Ge(Af) Gurgaon No-01.
Tender Value
25.95 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
20 days left
EMD
51900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Ladies/ Gents Toilets At Various Location At 27Ed Af Station Palam Under Ge(Af) Gurgaon No-01.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule-A B/R Portion |
| 2 | Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out soft loose soil. |
| 3 | Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm. |
| 4 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 5 | M&L RCC (design mix) M-25 (20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 6 | M&L RCC (design mix) M-25(20mm graded aggregate) as in Columns,pillars,piers,post and struts etc |
| 7 | Formwork to sides of curved concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter finished smooth. |
| 8 | M&L for RCC (design mix) M-25(20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 9 | M&L for RCC (design mix) M-25(using 20 mm graded stone agg) as in chajjas facia, shelves, lintel etc and similar work all as spd. |
| 10 | M&L for RCC (design mix) M-25( 20mm graded aggregate) as in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 11 | M&L Flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bresumers, lntels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc.for rough finished surfaces of concrete surface complete all as specified and directed. |
| 12 | M&L Flat Form work to soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( Horizontal or sloping) or rough finished surfaces of concrete surface complete all as specified and directed. |
| 13 | Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed. |
| 14 | Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed. |
| 15 | M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as on ceiling and to be finished even and smooth ( without using extra lime or cement) |
| 16 | M&L for 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces other than fair surface, finished the surfaces even and fair without using extra cement complete all as specified. |
| 17 | M&L for 15mm thick cement plastering in cm 1:4 on brick or concrete surfaces other than fair surface, finished the surfaces even and fair without using extra cement complete all as specified. |
| 18 | Material and Labour for Cutting into existing manholes for connecting new drain making good for 150mm/200mm/300mm bore of pipes & rendering cutting out existing benching and forming branch (1/2 round or ¾ section) channel in PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate surface finished even and smooth and reforming benching in reqd ; Complete all as specified and directed by Engineer-in-charge. |
| 19 | M&L for reinforced cement concrete pipe 150 mm dia class NP2 laid and jointed complete with collars as in sewar lines and jointed complete all as specified and as directed by Engr-in-charge. |
| 20 | M&L for Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 150mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed. |
| 21 | S&F SFRC MH Frame with cover of size 600mm x 450mm x 70mm thick surrounded with steel strip 70x2mm Reinforced as per manufacturer's design in Manufactured proccess laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover. |
| 22 | M&L for prepration of new plaster surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L preparation of new plaster surface and applying two coats of white wash on ceiling complete all as specified and directed by EIC. |
| 24 | M&L preparation of new plaster surface and applying two coats of Oil bound distemper on wall over 2mm thick wall putty(averaging) complete all as specified and directed by EIC. |
| 25 | M&L for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 26 | M&L Cement concrete type D2, 1:4:8 using 40mm graded agregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 27 | M&L brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed. |
| 28 | M&L Flat Form work to soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( Horizontal or sloping) or rough finished surfaces of concrete surface complete all as specified and directed. |
| 29 | Factory made single extructed WPC but frame size 50x 100 mm (wood polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawel strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Chaege |
| 30 | Factory made single extructed WPC (wood polymer Composite) solid Plain flush door shutters of 30 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minumum dencity of 650 kg/ cum and screw withdrawa strenth of 1800 N (Face )&900 N (Edge), minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/moisture proof and fire retardant and fixed with steelness steel butt hinges of requred size with necessary full body threank SS screw all as direction of engr in charge ( steelness srew and butt hinges and necessary SS Screw shall be paid separatly) |
| 31 | S&F Floor door stopper aluminium ally body and tongue anodised with hand drawn steel spring to door shutter of size 140 mm etc. |
| 32 | S&F Mild steel tower bolts,enamelled black,with bright bolt and fixed 150mm fixed. |
| 33 | S&F 125 mm long Brass handles, cast type polished bright |
| 34 | S&F stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed. |
| 35 | S&F Brass,sliding door bolt 150 mm longth with sand die cast brass hasp staple bolt type and fixing bolt complete all as specified and directed. |
| 36 | S&F stop value 15 mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified. |
| 37 | S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings incl taking down ISI marked complete all as specified. |
| 38 | S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings incl taking down ISI marked complete all as specified. |
| 39 | S&F Brass CP fancy type Bib Cock 15mm Bore (dia), Chromium Plated Long Body, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F stop valves(Concealed cock) 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified. |
| 41 | S&F Liquid Soap Dispensor with holder, fix in wall with Brass Chromium Plated ScrewsDish/Dispensor of any description, complete as all specified and directed. and as directed by Engineer-in-Charge. |
| 42 | S&F angel valves 15mm bore chromium plated alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified. |
| 43 | S& F vitreous china wash done water closet pedestral pattern pan (coupled closet ) white /coloured including vitreous china flushing cystern flush pipe seat, cover cystern cover complete set one pices as required and specified and directed. |
| 44 | Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed. |
| 45 | S&F sheet glass shelf assembly 60 cm oval shape consisting 5.5 mm thk 8mm thk glass with brass bracket including stainless steel railing, fixed to wall as complete all as specified and directed. |
| 46 | S & F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 47 | S&F Vitreous China 550x400mm Size Oval Shaped Wash Hand Basin White with 32mm dia Brass Chromium Plated Waste Fitting, including Cutting Chase cutting in wall and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall or floor complete all as specified and directed. |
| 49 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor height complete all as specified and directed. |
| 50 | S&F PVC (SWR ) bends 75 mm bore any radius complete all as specified and directed. |
| 51 | S&F PVC (SWR ) vent cowl 110 mm bore complete all as specified and directed. |
| 52 | M&L PVC (SWR ) floor trap 110/75 mm plain with grating incl. jointing with solvent cement as per site requirement complete all as specified and directed. |
| 53 | S & F Stack clamps (110 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof |
| 54 | M&L for 75 mm thick cement concrete type D-2, 1:4:8 using 40mm stone aggregate as in sub base all as spcified and directed by EIC. |
| 55 | M&L non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exceedng 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match over and including 15 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engineer-in-Charge. |
| 56 | M&L for glazed ceramic coloured tiles in vertical surface of size 450x350x7mmmm thick joint free on and incl 10mm thick screed bed in cm(1:4)set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles complete all as speciifed and directed by EIC. |
| 57 | Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore. |
| 58 | S&F stop value 20mm bore cast copper alloy with butterfly handle screwed down for high pressure, screed on bath ends, fixed with iron pipe etc complete all as specified. |
| 59 | S&F Brass CP Health Faucet with 1.00m long tube and holder as Approved,description,complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&f Plantex Stainlesss steel Folding Towel Rack for bath room/Towel Stand /Hanger size 24 inch Chrome complete all as specified and directed. |
| 61 | S&F soap dish, vitrous china white, approximate size 160 x 160 x 90 mm embedded in the wall complete all as specified and directed. |
| 62 | S&F Vitrous china white (Box type) toilet paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 63 | S&F 100mm dia CP grating with or without hole type complete all specified and directed. |
| 64 | Supplying and fix Luxury Bathroom Vanity viterous chinaware wash hand basin light colour/white of size 600 x 450 x 800mm, & 1 cabinet with legs,1 washbasin , 1 mirror size 600 x 1200mm and 1 front shelf brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length complete all as specified and directed. |
| 65 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 66 | Cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate as in roof padding complete all as specified. |
| 67 | 10 mm thick cement plaster in CM (1:3) using WPC on RCC roof slab including cleaning of existing surface complete all as specified and directed by Engineer-in-Charge.Note : WPC shall be measured and paid separately. |
| 68 | Material and labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified |
| 69 | Supply only integral water proofing compound |
| 70 | M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor. |
| 71 | M&L for 50 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) in sub base of floor. |
| 72 | M&L for Parking outer coloured Tiles dark shade 12 to 16 mm thick (Square/rectangular) polished, area 400mmX400mm of eachtile inparking set and jointed in neat cement slurry over 20 mm thick screed bed in Cement Mortar (1:4) as in Path, complete all as specified and as directed. |
| 73 | S&F Anodised aluminium frame for doors,windows,ventilators,side hunge one or more rebates including necessary jointing cleats,glazing clips, ruber neoprene packing anodised aluminium snap beading screw Tee etc section for weighing not less than 1.4 kg/RM complete all as specified and directed |
| 74 | S&F aluminium coloured power coated (shade or tint as directed by GE) Side Hung window/ventilator frame and Shutter with section as per TD-109/2012 sheet (1/4 to 4/4) comprising the following:-(a) Al coloured powder coated window frame section 101.60x44.45x1.93 mm fixed as per (b) Aluminium coloured power coated double shutter (Glass and Wire Mesh shutter) 44x44x1.50mm top/bottom/sides style. (c) Aluminium coloured power coated butt hinges 8 Nos in each window 100 mm sizes as per spd. (d) Aluminium coloured power coated tower bolt 3 Nos in each window 150 mm long as per spd.(e) Aluminium coloured power coated handle 2 Nos in each window 100 mm long as per spd.(f) Tinted/coloured glass 5 mm thick fixed to window with rubber gasket & Al Powder coated beading. (g) Aluminium coloured power coated grill make deco grill DG-104 fixed with \\"H\\" Section. Note : If ground requirement for sliding window/AC window contractor should provide as per direction of Engineer-in-Charge without any price adjustment.including taking down complete all as specified and directed by Engr-In Charge. |
| 75 | S&Ffigured glass pin head type, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty. |
| 76 | S&F for aluminium door & window, aluminium wire cloth, .36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 77 | E/M Portion Please Enable Macros to View BoQ information |
| 78 | E/M Portion Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender