Tender For Construction Of A Connecting Road From The District Hospitals Trauma Centre To The Academic Block.
Tender Value
1.53 Crore
Estimated cost
Bid Submission
13 Nov 2026
6 days left
EMD
9.69 Lakhs
Bank guarantee accepted
Document Fee
2720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A Connecting Road From The District Hospitals Trauma Centre To The Academic Block.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m |
| 2 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 3 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 |
| 4 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 5 | Providing and applying primer coat with SS2 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. |
| 6 | Providing and applying tack coat with bitumen (VG-10) using Emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 7 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (VG-30) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects |
| 8 | Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing |
| 9 | Construction of Shoulder with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of tableNo. 300-2 |
| 10 | Excavation in foundation in soil mixed with moorum/kanker/B.C soil etc. requiring the use of special T&P such as pickaxe, subbals etc. including lift up to 1.50 M and lead up to 30 M complete as per direction of E/I. and as per S.I. No. 252 |
| 11 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. |
| 12 | C.R. with cement and coarse sand mortar in the proportion of 1:4 respectively in foundation & plinth including cost of all material, labour, T&P etc. required for proper completion of the work. |
| 13 | Raised cement pointing with cement and fine sand mortar in the proportion of 1:3 respectively over stone masonary including all material, labour, T&P etc. required for proper completion of work. |
| 14 | C.C with cement, coarse sand and 20 mm gauge stone ballast in the proportion of 1:2:4 respectively including cost of material, labour, T&P etc. required for proper completion of the work |
| 15 | 15 MM thick plaster with cement and fine sand mortar in the proportion of 1:4 respectively including all material, labour, T&P etc. complete as per direction of E/I. |
| 16 | Supplying, laying, jointing and fixing of 350 mm dia NP3 class hume pipe with collar including its cost and carriage upto site etc complete as per direction of E/I. |
| 17 | Supplying, laying, jointing and fixing of 600 mm dia NP3 class hume pipe with collar including its cost and carriage upto site etc complete as per direction of E/I. |
| 18 | Supplying, laying, jointing and fixing of 900 mm dia NP3 class hume pipe with collar including its cost and carriage upto site etc complete as per direction of E/I. |
| 19 | Provinding & laying of hot applied themoplastic compound 2.5mm thick including reflectorizing glass beads @ 250gms per sqm. Area thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35 the finished surface to be level, uniform and free from streaks and holes. as per SOR. traffic signage S.N. 1 |
| 20 | Supply and fixing of indication board made of 2mm thick aluminium sheet area not exceeding 0.90 sqm. Supportde single iron post of 75x75x5mm, IRC-67 high intensity grade. LKO SOR 2024 P-58 |
| 21 | Supply and fixing of caution board made of 2mm thick aluminium sheet frame 35x35x5mm, hight 3.0 m,size 900x600mm retrorflective. LKO SOR 2020 P-57 |
| 22 | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc Ordinary kilometer stone (precast) |
| 23 | Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc Hectometer stone (precast) |
| 24 | Retro Reflective sheeting type IV with 4 mm thickACM single side SOR Morth 801 |
| 25 | Supply and fixing of Raised Pavement marker (Cat Eyes) of Avery Dennision/3M make of approved quality in size of width not exceeding 20 mm and height not exceding 20 mm made up to strong Engineering Polymer thermoplastic polyurethene with Electronic welded abrasion resistant lenses for Retro Reflective in dry and wet weather condition alone with Bituminous adhesive as per MORTH Specification. |
| 26 | Cantilever signage boardSupply,fixing and eraction of built up Cantilever structure 6m span comprising of one vertical post of 6.00m height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top and 12mm MS plate at bottom the horizontal truss shall comprise of 50mm dia heavy class MS pipe & 10 mmMS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coat of synthetic enemel paint,the work includes construction of RCC foundationof size 90x90 cm of required depth as per site condition for built up structure including earth work in excavation 100 mm thick lean concrete in 1:4:8 and RCC with 1:2:4 including supply and fixing of 25 mm dia foundation bolt 600 mm long as per provision of structure desing including cost of inforcement & shuttering the lateral vertical clearance and complete.Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect. The rate shall include cost of design,fabrication, supply transportation, local shifting erection of signage structure using crane inclsive of all taxes royalty,VAT etc all T&P machine material and labour for proper completion of work as per direction of E/I Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender