Tender For INSTALLATION Of Solar Drinking Water System At Chhail Kali Mondir, Activity Code No.- 145159717/ 26-27
Tender Value
3.49 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
7 days left
EMD
7000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dinajpur Dakshin → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for INSTALLATION Of Solar Drinking Water System At Chhail Kali Mondir, Activity Code No.- 145159717/ 26-27
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including, removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish,lead up to 50 m and lift upto 1.5 mAll kinds of soil |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 mAll kinds of soil |
| 3 | CEMENT CONCRETE (CAST IN SITU)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 4 | 1:1.5:3 (1 Cement : 1.5 Coarse sand (zone - III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cment : 3 coarse sand (zone - III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation, levelling & dressing & finishing the top smooth |
| 6 | STEEL REINFORCEMENTSteel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 7 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in |
| 8 | Providing and laying Ceramic glazed floor tiles of size 300X300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivgory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc. complete |
| 9 | 20 mm cement plaster of mix : |
| 10 | Providing and fixing MS grill of required pattern in frame of windows etc with MS flats, square or round bar etc including priming cost with approved steel primer all completeFixed to openings / wooden frames with raw / plugs screws etc |
| 11 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 12 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 13 | Constructing soak pit 1.20x1.20x1.20 m filled with brick bats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design |
| 14 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.23.1.1 All types of soil23.1.1.1 300 mm dia |
| 15 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 23.3.1 100 mm nominal size dia |
| 16 | Solar Module : Supply, transport, installation and commissioning of ISI marked Solar Modules as per following specification : 1. Cell indegenous mono crystaline silicon SPV cells 2. Solar Module : Monocrystaline cell with PERC technology module with bifacial and TOPCon cell. 3. Standards : ISI marked as per IS 14286 and having certification of IEC : 61853(1), 61730 (1&2), 61710. 4. Modules must qualify to IS 170210 (Part 1). 5. Min Efficiency : 19.5%. 6. Fill factor : More than 75%. 7. Module wattage mismatch in the SPV array : within +- 3%. 8. Wattage output warranty. Should not be less than 90% at the end of 10 years and 80% at the end of 25 years. 9. The power output of individual PV modules used in the PV array under STC: minimum 300 Wp. Necessary test certificates also to be supplied. For 1 HP Off grid Solar Water Pumping System with Monocrystalline PERC bifacial SPV modules 900 - 1200 Wp |
| 17 | Power conditioning unit with enclosure :Suppty , transport , installation and commissioning of Solar Power conditionang unit consisting of following components and features1) Variable ,frequency Drive with inbuilt MPPT, voltage range suitable for operating pump motor set of IHP to 20 HP, detail mentioned in Cl-6.12) Power input: DC source for.lHP, 2HP and 3HP.3) Power input : AC/ DC source or hybid for 5HP and above.4) lncomer: DC MCB 2 Pole 16 amp upto 5 HP, 25 amp for 7.5HP and 10 HP, 40 amp for 15 to 20 HP as per lS/lEC 60947-25) lncomer: AC MCB 4 pole 16 amp for 5 0 HP, 25 amp for 7.5HP a.d 10 HP, 40 amp for 15 to 20 HP as per lS/lEC 60947-26) Type ll DC SPD of 40 KA.7) Type llAC SPD of 40 KA for AC/ DC or Hybrid input.8) Dual input (solar/Grid) 25 amp changeover switch for 5HP and 7.5 HP, 40 amp for 10 HP, 63 amp for 15 to 20 HP9) Reverse protection diode 1600 VDC with heal sink.10) Data Logger.11) Remote monitoring syslem12) Should have bualt -in EMC fillers . 131 1P 65 elands for cable in and out14) Min. lP 54 enclosure. For delail features, proteclions, RMS, Communication architecture, Security, Data storage, tolerance of various parameters, standatdsto be qualifed, etc. For 1 HP capacity Pump motor set with DC input |
| 18 | Three phase openwell lsl Marked submersible pumpset of 1.5H.P. capacrty suitable ror operation on 415V(+-107o), 3- phase AC/DC supply complete as required. |
| 19 | Earthing with G.l. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure wth cover plate having locking araangement and watering pipe etc (but wilhout charcoal/ coke and salt) as required. |
| 20 | Supplying and laying 6 SWG G.l. wire at 0.50 Meter below ground level for conductor earth elecrode, including connection/ teminalion with Gl thimble etc. as required. |
| 21 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutling lhe wall and makang good the same in case of recessed conduit as required 20 mm |
| 22 | Cable and Accessories :Supplying, fitting and fixings of UV rated Copper Cable laid inside HDPE conduit and other accessones as per followings with necessary connectjon with the Solar PV Module, MPPT etc.i. 4.0 Sq mm single core multi studs - Sm(for 1HP/2HPI3HP) &20m(for s/7 .5/10/15/,17.5/20 HP)ii. Lugs, HDPE Pipe, Flexible Pipe, Saddle, Cable tie etc a) For 1 HP/2HP/3HP per structure |
| 23 | Add Escalation for Cost Index Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender