Tender For Special Repairs To External Electrical Installation To Assistant Executive Engineer Quarters At Nagapattinam In Nagapattinam District.
Tender Value
2.50 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
2500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagapattinam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To External Electrical Installation To Assistant Executive Engineer Quarters At Nagapattinam In Nagapattinam District.
BOQ
| Sl. No. | Item Description |
| 1 | Re-Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) 5 points / coils Higher End |
| 2 | Re-wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) HIgher End |
| 3 | Renewal by supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (HigherEnd) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 4 | Renewal by Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb |
| 5 | Renewal by Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting |
| 6 | Renewal by Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 600mm down rod with existing fan clamp |
| 7 | Renewal by Supply and fixing of 300mm (12\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall |
| 8 | Renewal by Supply and fixing of louvers shutters arrangements for 300mm (12\\") sweep (light duty) AC exhaust fan |
| 9 | Renewal by Supply and fixing of 375mm (15\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall |
| 10 | Renewal by Supply and fixing of louvers shutters arrangements for 375mm (15\\") sweep light duty AC Exhaust fan |
| 11 | Renewal by supply and fixing of 3 nos.6A two module 3 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End |
| 12 | Renewal by Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End |
| 13 | Renewal by Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. |
| 14 | Renewal by supply erection, testing, commissioning uninterrupted power supply (sinewave) with copper wound transformer of 2KVA with input supply of 230V, 50Hz AC supply with 150AH Tubular battery to work at full load capacity including transportation with following specification. 1.Input voltage: 230V, 50Hz single phase AC supply2.Output voltage: 220V to 240V 50Hz AC supply3.Battery charging device of suitable rating4.Circuit board of suitable capacity5.Over load and short circuit protection6.Visual Indication for ON/OFF/Trip/battery charging/mains failure/low battery etc.,7.Mode setting for By pass/Reset8.12V, 150AH battery - 2Nos.9.Trolly for heavy UPS & Battery. |
| 15 | Renewal by supply and fixing of 1500W automatic electric water heater of 35 litres capacity suitable for 230V, 50c/s, AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection. |
| 16 | Renewal by Earthing as per PWD standard with an earth electrode of 2metre Class'B' GI pipe of dia not less than 32 mm complete with necessary masonry work. |
| 17 | Renewal by supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection |
| 18 | LESS CREDIT for Old materials |
| 19 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender