Tender For Design, Detailed Engineering, Fabrication, Manufacture, Supply, Erection, Testing And Commissioning Of 2×160Mva (230/110Kv) Auto Transformers, 2×25Mva (110/33Kv) & 3×16Mva (110/11Kv) Power Transformers With Associated Switchgears, Accessor
Tender Overview
Project Description
Tender for Design, Detailed Engineering, Fabrication, Manufacture, Supply, Erection, Testing And Commissioning Of 2×160Mva (230/110Kv) Auto Transformers, 2×25Mva (110/33Kv) & 3×16Mva (110/11Kv) Power Transformers With Associated Switchgears, Accessories, Control Panels, Sub Station Automation System, Control Room And Complete Civil Works For The 230/110/33-11 Kv Ss Ais Sub Station At Sipcot Industrial Park,Shoolagiri In Thiruvalam Operation Circle Of System Operation/Salem.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule I- CIVIL WORKS |
| 2 | Schedule II - ELECTRICAL SUPPLY |
| 3 | Schedule III - ELECTRICAL ERECTION |
| 4 | Earthwork excavation for levelling the site for Control room and Septic tank portion in Oridinary soil excavation and deposting on bank with an initial lead of 10 mtrs. and lift of 2M. |
| 5 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for in hard gravelly soil |
| 6 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete. SDR NOT REQUIRING BLASTING |
| 7 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete For in medium rock and dense medium rock not requiring blasting. |
| 8 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for Hard Rock requiring blasting & stacking |
| 9 | Earthwork excavation for foundation with an initial lead of 10 m and lift of 2 m etc complete for removing hard rock by wedging and chiseling and trimming to proper shape where blasting is prohibited. |
| 10 | Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m around the building using BIFLEX-C termite 250ml for 10lit of water etc., complete. |
| 11 | Cutting and Filling in low lying area for levelling the surface including cost of cutting the gravelly soil/soft disintegrated rock with JCB/other machineris, consolidation as per specification & with power roller including all labour, lead, lift etc., complete. |
| 12 | Supplying and filling M sand for foundation and basement including watering and consolidation in 15 cm layers including cost of sand all labour, lead, lift etc., complete |
| 13 | Plain cement concrete M 10 using 12 to 20mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete. |
| 14 | Plain cement concrete M 15 using 12 to 20mm HBG metal for plinth foundation with formwork including cost of cement, all materials, labour, lead, lift, etc. complete. |
| 15 | Plain cement concrete M 15 using 20 mm HBG machine crushed metal with form work including cost of all materials, labour, lead, lift, etc., complete. |
| 16 | RCC M20 mix using 12-20 mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for raft concrete. |
| 17 | RCC M20 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for column concrete Upto Ground floor |
| 18 | RCC M20 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for column concrete upto first floor |
| 19 | RCC M20 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for column concrete upto second floor |
| 20 | RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for RCC road with formwork including cost of all materials, labour lead, litf, curing, etc., complete but excluding the cost of steel reinforcement. |
| 21 | RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for cable duct , Oil sump , reatining & Culvert wall concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete but excluding the cost of steel reinforcement. |
| 22 | RCC M20 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Grade beam/plinth beam |
| 23 | RCC M20 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Continuous lintel concrete for Ground floor |
| 24 | RCC M20 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Continuous lintel concrete for first floor |
| 25 | RCC M20 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Continuous lintel concrete for Second floor |
| 26 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end. Ground floor |
| 27 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end. Second floor |
| 28 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end. First floor |
| 29 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, shuttering, strutting, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof Beam concrete in Ground floor |
| 30 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, shuttering, strutting, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof Beam concrete in First floor |
| 31 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, shuttering, strutting, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof Beam concrete in Second floor |
| 32 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, shuttering, strutting, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof slab concrete in Ground floor 130 mm thick |
| 33 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, shuttering, strutting, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof slab concrete in First floor 130 mm thick |
| 34 | RCC M20 mix using 12-20mm HBG machine crushed metal including cost of all materials, shuttering, strutting, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for Roof slab concrete inSecond floor 100 mm thick |
| 35 | RCC M20 mix using 12-20mm HBG machine crushed metal with form work including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc., complete, but excluding cost of steel reinforcement, for precast cover slab concrete. |
| 36 | RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for transformer plinth, T2& T4 Towers and equipment plinth pedestal concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete but excluding the cost of steel reinforcement. |
| 37 | RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for Culvert slab concrete with formwork including cost of all materials, labour lead, litf, curing, etc., complete but excluding the cost of steel reinforcement |
| 38 | Providing steel reinforcement using steel of grade Fe 500 for RCC works including cost of steel, binding wire and placing in postion of the steel reinforcement, including cost of all materials, lead, lift, etc., complete. |
| 39 | Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete. Ground floor |
| 40 | Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete. First floor |
| 41 | Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour, lead, lift, curing, etc., complete.Second floor |
| 42 | Brick work in CM 1:3 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, curing, lead, lift, etc., complete. |
| 43 | RR masonry in cm1:5 using random rubble stone including cost of all materials leads and lifts etc. complete.Below GL |
| 44 | RR masonry in cm1:5 using random rubble stone including cost of all materials leads and lifts etc. complete.Above Ground Level |
| 45 | Flush pointing with CM 1:3 for arrangements including cost of all materials ,labour ,lead and lift etc. complete. |
| 46 | Plastering with CM 1:5, 12mm thick for walls including cost of all materials, curing, labour, lead, lift, etc., complete. |
| 47 | Plastering with CM 1:3, 12mm thick for ceiling, beams, sunshade including cost of all materials, curing, labour, lead, lift, etc., complete. |
| 48 | Providing and laying weather proof Tiles 300mm x 300mm size over screed concrete 1:3:6 with average thickness of 25 mm for required gradient and using best quality of one course of weather proof tiles of approved quality using in cm 1:3, 12 mm thick and using 3mm spacer and pointing with water Repellent U Bond and grout including cost of all materials ,transport curing etc complete. |
| 49 | Providing Damp proof course using cement mortar 1:3, 20mm thick with water proofing compound including cost of all materials, lead, lift, etc., complete. |
| 50 | White washing 2 coats using emulsion paint over one coat of primer with white colour for ceiling in all floors and exposed faces of beams including cost of all materials and scaffolding etc. complete. |
| 51 | Painting the inside walls with two coats of best quality interior emulsion over primer one coat and two coats of wall putty of approved colour including cost of all materials, etc., complete. |
| 52 | Painting out side walls with two coats of best quality exterior emulsion over primer one coat of approved colour including cost of all materials, etc., complete. |
| 53 | Painting with two coats of approved quality of acid proof paint over one coat of primer, over plastered wall surface in battery room including cost of all materials, labour, lead, lift, etc., complete. |
| 54 | Granolithic cement concrete M15 mix for floor finish 20 mm thick using stone chippings of 10 mm size and below, including cost of all materials, labour, lead, lift, curing, etc., complete |
| 55 | Flooring with Eurocon tiles 20mm Tk. of approved quality embedded in CM 1:3, 20mm thick and pointing with same coloured grout powder, for portico including cost of cement, all materials,curing, labour, lead, lift, etc., complete. |
| 56 | Flooring with approved joint free vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make) laid in CM 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, curing, etc., complete for floors other than toilets |
| 57 | Flooring with approved joint free vitrified tiles 305x305mm of approved Quality, design & colour (Johnson or equivalent make) laid in cement mortar 1:3 - 20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, curing, etc., complete for toilets |
| 58 | Daddooing walls with vitrified tiles of size 300x450mm laid in cement mortar 1:2, 10mm thick and pointing with same coloured cement using 0.4Kg/sq.m including finishing the joint and pointing flush with tile surface, cost of all materials, curing, labour, lead, lift, etc, complete |
| 59 | Supply and fixing granite stone for steps suitable colour including cost of all materials labour, lead, lift, etc., complete. |
| 60 | Supply and fixing in position of double leaf anodised aluminium fully glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608 Kg/m and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm @ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm @ 1.072 Kg/m glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete. Double leaf main door |
| 61 | Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc., complete Single leaf door |
| 62 | Supply and fixing of Aluminium Ventilator fully glazed lover type as per standard specification with approved section for frame and glass 4mm thick including cost of all materials, lead, lifts, labour, etc., complete. |
| 63 | Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials, lead, lift, etc., complete. |
| 64 | Supply and fixing in position of anodized aluminium glazed sliding window as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5.50mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete. |
| 65 | Supplying and fixing MS grills for windows and ventilators and other items using MS Flat and square rods as directed by the Engineer at site including painting two coats with enamel paint over a coat of primer cost of materials, labour, lead, lift, etc., complete. |
| 66 | Supplying and fixing of colour Europian type water closet with flushing cistern of Neycer/Parry ware with P\\"\\" or \\"S\\" trap, seat cover 15 mm dia connecting hos. 2 nos 15 mm dia CP angle valve, hand shower -1 No. including cost of all materials, lead, lift, etc., complete as directed by department Engineer at site |
| 67 | Supplying and fixing in position IWC ORISSA PAN of size 580X420mm colour glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc., complete. |
| 68 | Supplying and fixing in position white glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main as directed at site including the cost of all materials abour, lead, lift, T&P etc., complete. |
| 69 | Supply and fixing of white colour wash basin of size 550x400mm with all accessories such as cast iron brackets, 32 mm dia C.P waste coupling, rubber plug and chain, 32 mm dia 'B' Class G.I. waste pipe etc., 15 mm dia GM wheel valve, 15 mm dia nylon connection, complete. |
| 70 | Supplying and fixing in position 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top inlcuding cost of all materials, curing labour, leads, lifts, etc., complete. |
| 71 | Supplying and fixing in position 165 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete |
| 72 | Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit, transformer oil drain pit including cost of metal, all labour, lead, lift, consolidation, etc.,complete. |
| 73 | Supply and fixing 110mm PVC down fall pipe 4kg/cm2 avonplast or Finolex make with required bend, tee and GI wall clamp at 90cm intervals including cost of materials, labour, lead and lift etc., complete. |
| 74 | Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, excavation and refilling etc., complete. 40 MM DIA PVC PIPE |
| 75 | Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, excavation and refilling etc., complete. 32 MM DIA PVC PIPE |
| 76 | Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, excavation and refilling etc., complete. 25 MM DIA PVC PIPE |
| 77 | Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, excavation and refilling etc., complete. 20 MM DIA PVC PIPE |
| 78 | Supplying and fixing of 20 mm high quality PVC tap of approved quality cost of all materials, labour, lead, lift, etc., complete for water supply arrangements to earth pit. |
| 79 | Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete as directed by department Engineer at site for 40 MM DIA |
| 80 | Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete as directed by department Engineer at site for 32 MM DIA |
| 81 | Providing and fixing wheel valve of various diameter of Gun metal leader make of best quality including cost of all materials, labour, lead, lift etc., complete. 32 MM DIA |
| 82 | Providing and fixing wheel valve of various diameter of Gun metal leader make of best quality including cost of all materials, labour, lead, lift etc., complete. 25 MM DIA |
| 83 | Providing and fixing of long body chromium plated heavy duty metal tap of 12mm size including cost of all materials, labour, etc., complete. |
| 84 | Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [MDF exterior grade] and 5mm thick machine frosted float glass (modi, saint gobine or Equivalent) using aluminium box section of not less than 63×38.4×2mm×1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, lift, T&P etc., complete. |
| 85 | Fabrication,Supplying and fixing in position of ladder using GI angle and 16mm dia GI rods of width 45cm including welding, cost of all materials, labour, lead, lift etc., complete. |
| 86 | Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. S Type chair (Local rate) |
| 87 | Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. Three drawer steel table with Sunmica top of size 1200×750×750mm |
| 88 | Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. Steel side rack open type 1100×400×1200 |
| 89 | Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. Steel half bench 1200×400×600mm |
| 90 | Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. Revolving Chair |
| 91 | Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. Operator Table 6'×5' |
| 92 | Supply steel furniture manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead, lift etc., complete. PVC Nylon chair of approved quality |
| 93 | Providing inspection chamber with manhole cover depth varying from 0.75 to 1.5m including cost of all materails, lead, lift, etc., complete. Cast IRON 0.45x 0.45 |
| 94 | Providing inspection chamber with manhole cover depth varying from 0.75 to 1.5m including cost of all materails, lead, lift, etc., complete.Concrete (FRC ) 0.60 × 0.60 m |
| 95 | Supply and installation of Anutone (or) Equivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595×595×15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600×600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. |
| 96 | Supplying and fixing the name/ designation stickers in doors identifying the rooms including cost of material, labour, etc., complete. |
| 97 | Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead, lift, etc., complete. |
| 98 | Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site. |
| 99 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete |
| 100 | Providing shoring and shuttering using CW planks and scantlings including cost of all materials labour lead lift etc. complete |
| 101 | Dewatering during the earthwork excavation including cost of all material, labour, lead, lift etc., |
| 102 | Supplying, transporting fabrication, fixing of MS Rails (90 LBS) approved quality for transformer plinth in proper alignment and interconnections of the rails with flat on both ends by welding including cost of rail, all materials, labour charges, lead, lift, etc., complete, as per standard specification |
| 103 | Providing casing pipe line for laying cable to breaker plinths with 110 mm dia PVC pipe 6 kg/cm2 including all specials and cost of all material, lead, lift, etc., complete as per standard specification. |
| 104 | Supplying and fixing the paver block of 83 mm thick to the foot path of the operational switches inside the 230/110 yard including the cost of all materials, leads, fixing charges, lifts etc., complete |
| 105 | Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lift, etc., complete |
| 106 | Supplying and spreading of quarry dust for yard area including cost of quarry dust, labour for consolidation, lead, lift, etc.,complete. |
| 107 | Supplying and spreading of 20mm HBG metal for yard area including cost of quarry dust, labour for consolidation, lead, lift, etc., complete. |
| 108 | Labour charges for supplying,Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site |
| 109 | Assembling of template for fixing foundation bolts for towers, including cost of template and transport of template from stores to site, all labour for assembling and dismantling, lead, lift, etc., complete. |
| 110 | Providing and fixing of Anchor fastner bolt 12 mm dia 130 long in required length for fixing of cable tray Angle including cost of all materials, lead, lift, etc complete. |
| 111 | Refilling the foundation pits of towers, building etc., with excavated earth other than sand in layers of 150mm thick, including charges for spreading watering, consolidation as per standard speclification and as directed by the Engineer at site including all labour charges, lead, lifts, etc., complete. |
| 112 | Removal of surplus earth wherever necessary including transport up to 2 km away from the site, loading and unloading etc., complete |
| 113 | Engraving the name of Substation over entrance wing wall in both Tamil and English using cement plastering and providing borders, colouring with emulsion paints etc., including cost of all material, labour, lead, lift, etc., complete |
| 114 | Fixing of bore well point by well qualified geologist, labour, T & P including all lead, lift, etc., complete as directed by the department engineer at site. |
| 115 | Drilling of borewell including transportation from one place all type of soil and in rocky strata by first taking a pilot of 140mm/150mm dia and the enlarging to required dia. by direct or reverse rotating mud circulation method using contractors rig fuel, labour, drilling bentonite, mud and water, required for drilling at the shown by the TNEB officers including construction mud pit only calyx drills are to be used etc. complete. Upto 60 Mts |
| 116 | Drilling of borewell including transportation from one place all type of soil and in rocky strata by first taking a pilot of 140mm/150mm dia and the enlarging to required dia. by direct or reverse rotating mud circulation method using contractors rig fuel, labour, drilling bentonite, mud and water, required for drilling at the shown by the TNEB officers including construction mud pit only calyx drills are to be used etc. complete.Beyond 60-300 Mts. |
| 117 | Supply and erection of 180 mm dia rigid PVC casing pipe, having 4kg/cm² including cost all materials,lead, lift, re-boring the holes to required depth etc., complete with cover at the top of the bore well. |
| 118 | Supply and erection of 40 mm dia HDPE hose in black colour having ISI mark and as per IS 4984 -84,40mm dia (10 Kg/CM²) in and outside of the bore well including cost of all materials, labour, lead, lift, etc., complete. |
| 119 | Supply and erection of 20mm dia HDPE hose in black colour having ISI mark and as per IS 4984 -84,40mm dia (15 Kg/CM²) inside and outside of the bore well including cost of all materials, labour, lead,lift etc., complete. |
| 120 | Labour charges for developing the Bore well with air compressor of 600 CFM capacity (Minimum 8 Hour) including transportation labour and fuel charges for compressor as directed by TNEB officers and conducting yield test by V.NOTCH method. |
| 121 | Supply and erection of 5 HP ELGI compressor (or) any other reputed make of pump having ISI make with 3phase suguna (or) any other approved make 400V/440/50 cycle motor (5 HP) having ISI make (or) as approved by the Board Engineer at site with air pipe of 20mm dia to pump water to a height of 175mts.and delivery unit with foot valve v-belt arrangement including cost of all materials, labour, erection charges, 5 HP, 400/440V L&T make starter to suit the compressor including the cost of all materials, labour, lead and as per the instruction of Engineer in charge at site complete in all respects. |
| 122 | Supply and erection of 3 phase 30/32 Amps ICTP switch with fuse arrangements to suit the compressor with cost of all materials, labour, lead and lift etc., complete in all respects. |
| 123 | Supply and fixing of 15 Amps main fuse carrier in T.W.Board (600x600mm)with hings,screw, hook wall varnished including cost of all materials, lead, lift etc., complete in all respects. |
| 124 | Supply and laying of 12mm G.I. pipe of medium class for air compressor cost of G.I pipe, specials, cutting, threading, labour, lead, lift with required specials as per the instruction of Engineer in charge at site. |
| 125 | Providing and laying Wet Mix Macadam Base course of 250 mm compacted thickness in two layers of 125 mm thick or else specified on the prepared sub-base with IRC 45-2.36mm graded stone aggregate and granular material of quality size and grading in layers as specified, including mixing in Base Mix Plant, spreading in uniform layer with motor grader and compaction with vibrating roller of 80 - 100KN static weight and fine dressing to required grade amd cross slope as directed by dept Engineer at site. |
| 126 | Supply and fixing RCC spun pipe NP 3 for road crossing drains wherever necessary including cost of all material, labour for laying, lead, lift, etc., complete as directed by the engineer at site. For 300mm dia |
| 127 | Wiring with 2×1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 1.5 sq.mm copper wire for making good of the concealed portion with suitable colour for PVC concealed light point/fan point |
| 128 | Supply and run of 2×1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V gradein in PVC rigid pipe concealed in wall and ceiling with continuous earthwire connection of 1.5 sq.mm copper wire for making good of the concealed portion with suitable colour |
| 129 | Wiring with 2×1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150x100x113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking wall socket with 5A fluh type switch with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC Plug point. |
| 130 | Wiring with 2×4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm × 100 mm × 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 Pin non interlocking wall socket with 15A fluh type switch with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed power Plug point. |
| 131 | Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 Amps per way with 32 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work, with earth connections. |
| 132 | Supply and fixing of 32A TPN MC switch on suitable angle iron frame work with MS cable entry box with earth connection only. |
| 133 | Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour. |
| 134 | Supplying and fixing of 4×16w LED Single Industrial type fitting complete with copper choke and condenser with conduit pipe suspension from the ceiiling with PVC copper leads from the terminals to the fitting with flouresent fitting |
| 135 | Supply and fixing of 4'×16 W LED Twin type Mirror optic suspension type fitting (Philips/Crompton/Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes. |
| 136 | Supplying and fixing of water tight Bulk head fitting suitable with guard and 100 w LED bulb. |
| 137 | Supplying and fixing of 2×36 W FTL Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift etc., complete, as per standard specification. |
| 138 | Supply and fixing of fancy glass shade and 7 W / 9 W LED bulb |
| 139 | Supply and fixing of 1400 mm sweep (56\\") AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod including fan clamp with side plates and cross arm of size 450 mm. |
| 140 | Supplying and fixing of 1200mm sweep AC ceiling fan with electronic regulator with 300mm down rod on the existing clamps of approved quality of Crompton/Rally/usha/bajaj including cost of all materials, lead, lift, etc., complete. |
| 141 | Supply and fixing of 450 mm (18\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. |
| 142 | Supplying and fixing of RCCB safe trip of appd LEGRAND, ISI make, 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification. |
| 143 | Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make). |
| 144 | Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work. |
| 145 | Supplying and installation of split Air Conditioner (3 phase - 2.0 TR Split Type AC Unit ) of approved make 5 Star Rated Inverter (Carrier / Voltas / O General/ Equivalent) with all accessories including stabilizer ( V guard) with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete. |
| 146 | Supply and fixing of 32 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]. |
| 147 | Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete. |
| 148 | Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work, with earth connections. |
| 149 | Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete. |
| 150 | Supplying and laying 25 mm dia 10 kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete |
| 151 | Supplying and fixing the paver block of 60 mm thick to the foot path of the operational switches inside the 230/110 yard including the cost of all materials, leads, fixing charges, lifts etc., complete |
| 152 | Drilling 4½\\" dia hole in brick wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete. 100 mm dia |
| 153 | Drilling 4½\\" dia hole in brick wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete. 50 mm dia |
| 154 | Supplying and fixing 5/8\\" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete. |
| 155 | Laying and fixing of Controflex compound in around window/ventilator for protection of rain water. |
| 156 | Providing rain water recharge bore holes by drilling of 300 mm dia bore hole 6.00 m depth and filling the holes with hard broken stone of size 40 mm as directed by engineer at site including the cost of all materials, lead, lift, labour, T&P, etc., complete |
| 157 | Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including all cost of materails, lead, lift, etc., complete. |
| 158 | Supplying and fixing in position of best quality mirror (22\\" x 16\\") with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc., complete as directed by the engineer at site |
| 159 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials and soap tray including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. |
| 160 | Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 161 | Supply & fixing marble partition of 25 mm thick 600 mm wide and 1200 mm high including necessary cement mortar with white cement concrete for urinals as directed by department Engineer at site |
| 162 | Supplying, Fixing of buzzers with 5A bell push switch etc complete. |
| 163 | Providing and laying PVC high density pipe (10 kg. per cm2 ) for provide weep holes in the retaining wall including all material labour, etc., complete and as directed by the Engineer-in-charge at site.For 50 mm dia |
| 164 | Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall & cable duct including cost of machinaries, labour, etc., complete Brick wall |
| 165 | Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall & cable duct including cost of machinaries, labour, etc., complete in RCC concrete |
| 166 | Painting with two coats of approved enamel paint over one coat of primer for all M.S door window ,gater etc. including cost of all materilas, labour, lead, lift etc. complete. |
| 167 | Providing projected border of 7.50 cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing, etc., complete. |
| 168 | Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete. |
| 169 | Providing PVC door bend 50 mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete. |
| 170 | Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 171 | Supplying and fixing 110 mm dia PVC. Bend or Door Elbow including cost of materials, lead lift, etc. Complete |
| 172 | Supplying and fixing 110mm dia Pvc TEE or Tee with Door (Double) including cost of materials, labour lead lift, etc. Complete |
| 173 | Supplying and fixing of two side polished 20 -30 mm tk.cuddapah slab for cupboard etc., including cost of all materials, labour, lead, lift, etc., complete |
| 174 | Supplying and fixing musical quartz type Wall Clock of size 30 x30 cm of approved quality and colour including transport, fixing charges, etc., complete. |
| 175 | Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., ROLLING SHUTTERS (WITH ISI MONOGRAM) |
| 176 | Providing decorative terracotta tiles over CM 1:3,20 mm and pointed with white cement including cost of all materials , lead, lift, etc. complete. |
| 177 | Supplying and fixing of RCC jolly for head room including cost of all materials , lead, lift, etc. complete. |
| 178 | Supplying, filling & spreading of good quality gravel layer by layer with proper consolidation for substation yard, low lying area, road berms, behind of abutment & wing wall including cost of all materials, labour, lead, lift etc., Complete. |
| 179 | Supplying and fixing of Name Board letter in brass including cost of all materials, lead, lift, etc., as directed by engineer and approval. |
| 180 | Supplying and fixing of Vertical Blinds (all window) and all accessarious materiales including all labour, lead, lift, etc., complete. |
| 181 | Supply and fixing of 50 Sq.mm GI Chain link fencing of 9 gauge with standard width of 2.40 m height including cost of all material, labour for fixing, transportion, lead, lift, etc., complete. |
| 182 | Suplying, fabricating and fixing in position of GI angle fence post with 50x50x6mm MS angle with making necessary groovs in that to fix the barbed wire fencing including cost of all materials, all labour,lead, lift, etc., complete as directed by the engineer at site. |
| 183 | Supply, Transport ,fabrication & fixing of GI angles for cableduct splitting the fixed end of angle for anchorage and placing in position as directed by the engineer at site including cost of angles, cost of painting with aluminium paint two coats over one coat of red oxide primer, all labour, lead, lift, etc. complete. |
| 184 | Fabrication, supplying and erection of M.S. grill for ornamental gate as per standard specification approved by the engineer at site including cost of all materials, welding, painting with two coats of enamel paint over one coat of red oxide primer including cost of all materials, labour, lead, lift, etc. complete. |
| 185 | Clearing juliflora jungle with uprooting including all labour, lead, lift, etc., complete. |
| 186 | Hire charges for JCB for levelling the site including cost of hire charges,fuel charges, all labour, lead, lift, etc., complete. |
| 187 | Painting the outside walls with two coats of Super Snowcem cement paint over a white cement primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete. |
| 188 | Supplying and labour charges for winding, tensioning and binding with binding wire of GI barbed wire of 6 rows of horizontally as instructed by the engineer at site for fencing including cost of hot dip galvanised 4 fly 12 g barbed wire of all labour, lead, lift etc. complete., |
| 189 | Labour charges for fixing of grouting bolt including aligining in position including labour lead lift etc., complete. |
| 190 | Providing Anchor /Grip rod for foundation in the rock surface with drilling of 40 mm dia holes and fixing of 25 mm dia RTS rod 1.m length inside the holes and 1m length out side the holes with L shape bending including cost of all materials labour lead lift etc complete. |
| 191 | Providing and laying GI pipe 160 mm dia for for transformer to Oil sump high density pipe including cost of all specials like coupling, bend etc., all material labour, etc., complete. |
| 192 | Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site. |
| 193 | Fabrication, galvanisation and supply of standard MS towers part as per department approved drawing/design for \\"T2,T4,C3S, C4\\" type towers algong with corresponding boom and other type tower for 230 KV yard and 110 KV yard and all other lattice structure including all taxes and duties, fright charges etc, complete. The raw materials standard should be as per IS 2062 and for galvanishing as per IS 2633 and 6745 (Latest code), The governing standards for towers should be as per the specified IS codes directed by Depertmental engineer.(The contracter need to arange for inspection of towers at purachase factory at his own cost). |
| 194 | Supplying, Transportation from source to site , fabrication, galvanising of standard Bolts and nuts for for \\"T2,T4,C3S, C4\\" type towers algong with corresponding boom and other type tower for 230 KV yard and 110 KV yard of various sizes and various lengths as per department approved drawing including all taxes and duties, lead, lift and head load, freight charges etc., the raw material standard should be as per IS 2633 and 6745 and as per specification as per IS code directed by department engineer at site. |
| 195 | supplying and fabrication of 20 ,25 ,32 & 56mm Foundation bolt with various sizes of required length including threading with 3 nos check nut of GI nuts and washers and fixing in the position as directed by the engineer at site including ., cost of all material, labour, lead, lift etc., complete |
| 196 | Transport and erection of T2 , T4, C3S & C4 towers & its Boom and bolts & Nuts including sorting out of tower members, tightening punching the bolts and nuts whereever necessary, patch painting, cutting of angles wherever necessary, minor fabrication workss, final checking, cost of T & P, labour of independent gang to be deployed in propotianate to the progress to be acheived within the specified time frame stipulated by the TANTRANSCO officials, lead lift t&p including cost of all materials,adhering to the BOCW act 1996 and rules 2006 without any compromise all leads and lifts etc., complete. |
| 197 | Labour charges for transporting, aligning and fixing of Precast cover slab for cable duct as directed by the site engineer including all labour for earth work excavation trench of required size and depth, lead, lift etc complete as directed by the Engineers incharge at site. |
| 198 | Spraying Glycel to control weed growth in the 230 KV & 110 KV yard area including cost of all materials, labour charges etc., complete. |
| 199 | Auto/Distribution Transformers |
| 200 | 230/110kV, 160 MVA Auto Transformer with OLTC and Nitrogen Injection Fire Ptrotection System (NIFPS) |
| 201 | 110/33kV, 25 MVA Power Transformer with OLTC |
| 202 | 110/11kV,16 MVA Power Transformer with OLTC |
| 203 | Distribution Transformer, 33KV/433V, 500kVA, with RTCC Panel & all accessories |
| 204 | Distribution Transformer, 11KV/433V, 250kVA, (Copper winding), Energy Efficient level-1, with RTCC Panel & all accessories |
| 205 | DG Set |
| 206 | 250kVA, 433V, 3 Ph Diesel Generator Set with all accessories, battery, exhaust pipes with suitable thermal insulation, AMF panel, powercables, & all consumables. |
| 207 | Breakers |
| 208 | 245kV, 2000A,50kA/3 sec outdoor SF6 Breaker with all accessories and support structure-220V,DC |
| 209 | 110kV,40kA outdoor SF6 Breaker with all accessories and support structure-220V,DC |
| 210 | 110kV,40kA outdoor SF6 Breaker with all accessories and support structure-110V,DC |
| 211 | 33kV VCB,1250A,25kA (Outdoor) with all accessories - 110V,DC |
| 212 | 1kV VCB,1250A,25kA (Outdoor) with all accessories - 110V,DC |
| 213 | Current Transformer |
| 214 | 230kV Current Transformer (2000-1200-800/1A, 5 Core) with TC & disconnecting type terminal blocks. |
| 215 | Junction box for 230kV CT (1No. Junction Box for 3nos. CT's) |
| 216 | 110kV Current Transformer (1200-600-300/1A, 5 Core) with TC & disconnecting type terminal blocks. |
| 217 | Junction box for 110kV CT |
| 218 | 33kV Current Transformer (1200-600-300/1A, 2 Core) with TC (For LV) |
| 219 | 33kV Current Transformer (600-300-150/1A, 2 Core) with TC (For Feeders) |
| 220 | 11kV Current Transformer (1200-600/1A, 2 Core)Oil filled with TC out door type (For LV) |
| 221 | 11 KV Current Transformer (400-200-100/1A, 2 Core) Oil filled with TC out door (For Feeders) |
| 222 | Potential Transformer |
| 223 | 230kV Potential Transformer with all accessories (BUS PT) |
| 224 | 110kV Potential Transformer with all accessories (BUS PT) |
| 225 | Potential Transformer Junction Box (230kV &110kV) |
| 226 | 33kV Potential Transformer with all accessories |
| 227 | 11kV Potential Transformer with all accessories |
| 228 | Line Side PT's |
| 229 | 230kV single phase CVT with structure |
| 230 | 110kV single phase CVT with Structure |
| 231 | Lightning Arrestors |
| 232 | 230kV LAS without support structure and with surge Monitor |
| 233 | 110kV LAS without support structure and with surge Monitor |
| 234 | 33kV Station type LAS |
| 235 | 33kV Distribution type LAS |
| 236 | 11kV Station Type LAS |
| 237 | 11kV Distribution type LAS |
| 238 | Isolators |
| 239 | 230kV, (2000 A) Motor Operated Isolator with Earth blades without support structure. |
| 240 | 230kV, (2000 A) Motor Operated Isolator without earth blades including tower isolator without support structure. |
| 241 | 110kV,(2000 A) Isolator with Earth blades without support structure |
| 242 | 110kV,(2000 A) Isolator without earth blades without support structure |
| 243 | Motor Operated Mechanisam box for 110kV isolator for SAS interface (220V DC & 110V DC) for 110kV, 33kV and 11kV SS side |
| 244 | BOM Box for 110kV earth isolator |
| 245 | 33kV, (1250A) Isolator without earth, and all accessories |
| 246 | 11kV, (1250A) Isolator without earth, and all accessories |
| 247 | 33kV, HG Fuse set (Without insulator) set with all accessories |
| 248 | 11kV, HG Fuse set (Without insulator) with all accessories |
| 249 | Battery and Battery Chargers |
| 250 | 220V DC, 300AH, Battery complete Set with wooden Stand |
| 251 | 110V DC, 300AH, Battery Set with Stand |
| 252 | 48V DC, 400AH, Battery Set with Stand (SAN Container) |
| 253 | 220V DC, 60 Amps, 433V,AC (3Phase) Battery charger with potential free contacts for all indications for SAS interface. |
| 254 | 110V DC, 60 Amps, 433V,AC (3Phase) Battery charger with potential free contacts for all indications for SAS interface. |
| 255 | 48V DC, 80 Amps,433V,AC (3Phase) Battery charger with potential free contacts for all indications for SAS interface. |
| 256 | Control & Relay Panels suited to Automation of the SS (220V DC supply) with SAS for 230/110kV side |
| 257 | Control and Protection panel for 230/110kV Auto Transformer (HV+LV) |
| 258 | Control and Protection panel for 230/110kV Auto Transformer (HV+LV) - Future transformer |
| 259 | Control and Protection panel for 230kV Feeder protection-Distance protection |
| 260 | Control and Protection panel for 230kV Feeder protection - Line Differential protection |
| 261 | Control and Protection panel for 230kV Feeder protection - Line Differential protection - Future bay |
| 262 | Control and Protection panel for 230kV Transfer/Buscoupler |
| 263 | 230kV Bus bar protection Relay panels (15 circuits) |
| 264 | Synchronising cum islanding panel for 230kV bays |
| 265 | Control and Protection panel for 110kV Feeder Distance protection for Double bus arranegement |
| 266 | Control and Protection panel for 110kV Feeder protection for double bus arrangement- Line Differential protection- Future bays |
| 267 | Control & Protection panel for 110KV Bus sectioner/Coupler with double bus arrangement |
| 268 | Control & Protection panel for 110KV Bus sectioner/Coupler - Future bay |
| 269 | Relay panel for 110 KV Bus bar protection (28 circuits) |
| 270 | Synchronising cum islanding panel for 110kV bays |
| 271 | Sub station Automation System for 230/110 KVSS (Upto 28 Electrical bays) (25 No's Electrical bays +3 No's spare bays) |
| 272 | Main-I Numerical Differential protection relay, Media converters, Ethernet switch, Patch cords with necessary associated materials FOR 230kV Line for remote end Shoolagiri 400kV PGCIL substation |
| 273 | Main-II Numerical; Differential protection relay, Media converters, patch cords with necessary associated materials for 230kV Line for remote end Shoolagiri 400kV PGCIL substation |
| 274 | Control and Protection panel for 230kV Feeder protection - Line Differential protection for remote end Shoolagiri 400KV PGCIL end |
| 275 | Control and Protection panel for 230kV Feeder protection - Line Differential protection for remote end Future feeder |
| 276 | Control and Protection panel for 110kV Feeder protection - Line Differential protection- Remote end Future bays |
| 277 | Essential Spares for SAS |
| 278 | Control & Relay Panels suited to Automation of the SS (110V DC supply) with SAS for 110/33-11kV side |
| 279 | RTU with LDMS system with necessary associated materials |
| 280 | Control & Protection panel for 110/33kV Power Transformer with BCU including HV and LV control 110V DC |
| 281 | Control & Protection panel for 33KV LV side of Power Transformer with BCPU 110V DC |
| 282 | Control & Protection panel for 110/11KV Power Transformer with BCU including HV and LV control 110V DC |
| 283 | 110V DC, 33kV Indoor Control & Relay Panel for Twin Feeder with SAS - BCPU Numeric Relay Version - (Including future bays) |
| 284 | 110V DC, 11KV Indoor Control & Relay Panel for Twin Feeder with SAS - BCPU Numeric Relay Version - (Including future bays) |
| 285 | OTHER PANELS |
| 286 | 220V DC Distribution Panel (With 30 Nos. DC MCBs) |
| 287 | 110V DC Distribution Panel (With 30 Nos. DC MCBs) |
| 288 | AC Panel for 230kV SS with potential free contact arrangement for AC supply monitering like Phase reversal,single phasing,supply failue etc for SAS interface (Under voltage,Over voltage Static relays included) |
| 289 | Bay marshiling box for AC Distribution |
| 290 | Bay marshiling box for DC Distribution |
| 291 | AC Panel for 110 KV SS with potential free contact arrangement for AC supply monitering like Phase reversal,single phasing,supply failue etc for SAS interface(Under voltage,Over voltage Static relays included) |
| 292 | Communication Equipments |
| 293 | Supply of Standalone 19\\" Rack Panel for accommodating 4 nos 48 Fibre optic cable with necessary fibre entry provision |
| 294 | Digital Protection coupler for 3 Nos. 230kV feeders on both ends |
| 295 | Cabinet for Digital Protection coupler including remote SS |
| 296 | Fibre Optic terminal equipments (Hybrid FOTE Remote end PGCIL SS - 1)/MPLS-TP (Shoolagiri SS-1, Thirupattur - 1) |
| 297 | Telephony system (Hybrid EPAX with necessary cables for telephony (Shoolagiri) |
| 298 | Supply of VOIP Telephones wire CAT6 shielded Cable, and associated accessories (Shoolagiri-2, Thirupattur - 1) |
| 299 | Self survival stand alone VoIP Gateway,Ethernet switche(s) and assoicated materials for Voice communication (Thirupattur SS) |
| 300 | 24 port Ethernet switche(s) (16Eth + 8PoE/PoE+) (Shoolagiri-2, Thirupattur - 1) |
| 301 | Telephones (Shoolagiri-5, Thirupattur - 1 No) |
| 302 | Necessary Cables, media converter and assossiated accessories for voice communication connectivity |
| 303 | Hardware augmentation of existing FOTE/Provision of new MPLS-TP at remote end SS |
| 304 | Supply of Mandatory Spares and tools for FOTE equipment as per specification |
| 305 | Supply of Mandatory Spares and tools for DTPC equipment as per specification |
| 306 | Supply of Mandatory Spares and tools for Hybrid EPAX and VOIP Gateway equipment as per specification |
| 307 | Bus Materials |
| 308 | 75 mm Aluminium BusBar (9.14 mtr length,150 Nos) |
| 309 | 50 mm Aluminium BusBar (4.2 m length, 12 Nos) |
| 310 | ACSR Moose Conductor |
| 311 | ACSR Zebra Conductor |
| 312 | 230kV Solid core Insulator (For isolators and support structures) |
| 313 | 110kV Solid core Insulator (For isolators and support structures) |
| 314 | 11kV, 160kN ordinary Disc insulator for suspension |
| 315 | 11kV, 120kN Disc insulator ordinary |
| 316 | 22kV PT Insulator |
| 317 | 11kV PT Insulator |
| 318 | HTGS GI Earth wire7/3.55mm for AH tower, VC column, WC column earth spike earthing (3.15 mm) |
| 319 | Armoured UG Copper Control Cables (Including for Auto Transformer & Power Transformer wiring) |
| 320 | Copper cable 20 × 2.5 Sq.mm Armoured |
| 321 | Copper cable 14 × 2.5 Sq.mm Armoured |
| 322 | Copper cable 8 × 4 Sq.mm Armoured |
| 323 | Copper cable 8 × 2.5 Sq.mm Armoured |
| 324 | Copper cable 2 × 16 Sq.mm Armoured |
| 325 | Copper cable 4 × 4 Sq.mm Armoured |
| 326 | Copper cable 4 × 2.5 Sq.mm Armoured |
| 327 | Copper cable 2 × 2.5 Sq.mm Armoured |
| 328 | 4 × 120 Sqmm Armoured Aluminium cable |
| 329 | Power Connectors |
| 330 | Supply and Erection of Single Tension String assembly with single anchoring point clamp for twin Moose ACSR 225 mm Spacing |
| 331 | Supply and Erection of Single Tension String assembly for single Moose ACSR |
| 332 | Supply and erection of Double suspension clamp for single Moose ACSR |
| 333 | Supply and erection of Single suspension clamp for Double Zebra ACSR with 225 mm spacing |
| 334 | Supply and erection of T Clamp for Twin Moose to Single Moose |
| 335 | Supply and Erection of T- Clamp for Single Moose to Single Moose |
| 336 | Supply and erection of Switch end clamp for Single Moose |
| 337 | Supply and erection of Switch end clamp for Double Moose extension type |
| 338 | Supply and erection of T Clamp for 75 mm Busbar to Single Moose |
| 339 | Supply and erection of Spacer Clamp for Twin Moose with 225 mm Spacing |
| 340 | Supply and erection of T clamp for 75mm Busbar to Double Moose |
| 341 | Supply and erection of Supply and erection of Switch end clamp for 75 mm Busbar |
| 342 | Supply and erection of Electrical connection with Busbar support in switchend clamp with double zebra conductor |
| 343 | Supply and erection of 6 Bolt Tension fitting for Zebra conductir with 225 mm spacing with single anchoring point(For 110kV main bus and interconnection portion) |
| 344 | Supply and erection spacer for twin zebra with 225 mm spcing (For 110kV side of 110/33-11 kV SS) |
| 345 | Supply and erection of 6 Bolt Tension fitting for Zebra (For 110 KV side of 110/33-11kV SS) |
| 346 | Supply and erection of 4 Bolt Tension fitting for Zebra (For 33kV and 11kV) |
| 347 | Supply and erection of Switch end clamp for single Zebra |
| 348 | Supply and erection of Switch end clamp for Panther |
| 349 | Supply and erection of Switch end clamp for Mink |
| 350 | Supply and erection of T Clamp for Zebra to Zebra |
| 351 | Supply and erection of T Clamp for Zebra to 75 mm Busbar |
| 352 | Supply and erection of T Clamp for Zebra to 50 mm Busbar |
| 353 | Supply and erection of T Clamp for Panther to Zebra (For 110kV line side LAS jumper) |
| 354 | Supply and erection of L clamp for Zebra |
| 355 | Supply and erection of PG Clamp for Zebra |
| 356 | Supply and erection of Free end Clamp for 75 mm Bus Bar |
| 357 | Supply and erection of Free end Clamp for 50 mm Bus Bar |
| 358 | Supply and erection of Corona Bell for 75 mm Bus Bar |
| 359 | Supply and erection of Corona Bell for 50 mm Bus Bar |
| 360 | Supply and erection of Joint Clamp for 75mm Bus Bar |
| 361 | Supply and erection of Reducer Clamp for 75mm Bus to Zebra |
| 362 | Supply and erection of Seating block for 75 mm bus bar |
| 363 | Supply of the following IRON & STEEL materials as per latest IS a) GI MATERIALS (For 230KV and 110kV equipment structures only) |
| 364 | Supply of G.I Lattice equipments structures for 230/110 KV side |
| 365 | b) MS MATERIALS (For 110/33-11kV SS structures and earthing materials for 230/110/33-11kV SS) |
| 366 | R.S.Joist 200 × 100 mm with cutting & wastage |
| 367 | M.S.Channel 125 × 65 mm with cutting & wastage |
| 368 | M.S.Channel 100 × 50 mm with cutting & wastage |
| 369 | M.S angle of Various Size for Structures |
| 370 | M.S.Flat 75 × 12 mm with cutting & wastage |
| 371 | M.S.Flat 65 × 10 mm with cutting & wastage |
| 372 | M.S.Flat 50 × 8 mm with cutting & wastage |
| 373 | M.S.Rod 40 mm dia with cutting & wastage |
| 374 | M.S.Rod 20 mm dia with cutting & wastage |
| 375 | M.S. Chequrred Plate with cutting & wastage |
| 376 | Supply of paints |
| 377 | Supply of good quality Aluminium paint |
| 378 | Supply of good quality red oxide paint (as per V.Madepally 110kV SS labour sanction) |
| 379 | Supply of good quality AC Black paint (as per V.Madepally 110kV SS labour sanction) |
| 380 | Supply and provision of M8,M9, M10,M12, & M16 full thread GI bolt, nuts & GI washer of various size for erection of insulator or any other purpose wherever required and as directed by the field Engineer. |
| 381 | GI Ladder type Cable tray 2.5m L, 0.6m W thickness 2mm with coupling plate and bolt nuts |
| 382 | GI Ladder type Cable tray 2.5m L, 0.45m W thickness 2mm with coupling plate and bolt nuts |
| 383 | GI Ladder type Cable tray 2.5 m L, 0.3 m W thickness 2mm with coupling plate and bolt nuts |
| 384 | Manufacturing and supply of bolt of required length out of 18 to 20 mm dia G.I rod including the cost of G.I rod and 2 Nos. G.I. Nuts & washer as directed by field Engineer (Eye Bolt ) |
| 385 | Yard Lighting Materials |
| 386 | Supply of 8 Metre Length Single bracket pole with base plate (250 × 250 X6 mm) 114.30 OD × 5.40mm thick × 4500 mm length, 88.90mm OD × 4.85 mm Thick × 1750 mm Length, 70.10 mm OD X 3.25 mm Thick × 1750 mm Length.(For Street Light) |
| 387 | Supply of 8 Metre Length Double bracket pole with base plate (250 × 250 × 6 mm) 114.30 OD × 5.40mm thick × 4500 mm length, 88.90mm OD × 4.85 mm Thick × 1750 mm Length, 70.10 mm OD × 3.25 mm Thick × 1750 mm Length. (For Street Light) |
| 388 | Supply of 6 mtr length Single Bracket pole with base plate (250 × 250 × 6mm) 76.10mm ODx3.65 mm Thick × 6000mm length.(For Street Light) |
| 389 | Supply of LED lamp72W fitting with fixture and fuse box including wirng and testing for burning condition,including the cost of 15 amps 2Way strip connector and other consumables. |
| 390 | Fire Fighting Equipments for 230/110 KVSS |
| 391 | Fire extinguisher foam type trolly mounted 50 Ltr capacity with accessories. |
| 392 | Fire extinguisher foam type trolly mounted 9 Ltr capacity with accessories. |
| 393 | Fire extinguisher DCP type type trolly mounted 25 Kg capacity with accessories. |
| 394 | Fire extinguisher DCP type 9 Kg capacity with accessories. |
| 395 | Fire extinguisher DCP type Portable 6 kg capacity. |
| 396 | Manufacturing & Supply of sand drum made out of oil drum of size 580 mm dia and 420 mm height with conical cover made out of tin sheet provided with handle including cost of barel,sand and consumables as directed by field engineer. |
| 397 | Rubber Mat 2000 × 1000 × 10 mm |
| 398 | Manufacturing & supply of fire bucket of 10 Ltr capacity made out of 26 SWG sheet (0.46 mm) M.S.Sheet painted with white & Red namal paint inside & outside respectively bottom of bucket shall be ' U ' shapped out side of the bucket shall be written as Fire in English / Tamil in white enamal paint including cost of all materials. |
| 399 | Other Substation Accessories for Substation Opeartion wing |
| 400 | Supply of gauntlets |
| 401 | Supply of discharge rod, made of PVC with Copper flats & 6 sq.mm cable as required by the field Engineer. |
| 402 | Supply of earth rods, made of PVC wood with copper flats & 6 sq.mm Cable as required by the field Engineer |
| 403 | First aid box |
| 404 | 30 feet Aluminium Alloy trolly tiltable tower extension ladder |
| 405 | Sceintific instruments |
| 406 | Digital True RMS Multimeter |
| 407 | 5kV Insulation Tester |
| 408 | AC/DC Clamp Meter 2000A |
| 409 | Single phase Variac 10A |
| 410 | Optical Time Domain Reflectometer |
| 411 | Three Phase Variac 15A |
| 412 | Supply of 25kW Roof top Solar Power Plant with Bi-Polar Panels with all accessories |
| 413 | Fabrication and erection of structures a) Labour, machinery, Consumables for the Fabrication for steel structures |
| 414 | Heavy section without lengthwise joints (14 kg/m and above) |
| 415 | Heavy section with lengthwise joints (14 kg/m and above) |
| 416 | Light section (below 14 kg/m) |
| 417 | b) Labour for the Erection of the Fabricated Steel Structures |
| 418 | Heavy section (14 kg/m and above) |
| 419 | Light section (below 14 kg/m) (Including Lattice structures and MS structures) |
| 420 | Labour charges for first primer coat of all sections (Excluding Lattice Portion only M.S fabrication) |
| 421 | Labour charges for first Finishing coat coat of all sections (Excluding Lattice Portion only M.S fabrication) |
| 422 | Labour charges for Second finishing coat of all sections (Excluding Lattice Portion only M.S fabrication) |
| 423 | Labour charges machineries, consumables for erection of earthmat and earth raisers as directed by the field engineer. |
| 424 | Providing 140/150mm dia bore including labour,lead,lift etc., complete mobilization in all types of soil and erection of earth electrode, supply and providing A4 Grade bentonite powder with 5% common salt mixed with available site clay soil with water 5Kg/meter depth in earth bore and pouring water and tightening of earth bore, upto satisfactory earth resistance value ,and as directed by the field Engineer.(225 × 9) |
| 425 | Labour charges machineries, consumables for fabrication and erection of earth spikes as directed by field Engineer |
| 426 | Labour charges machineries, consumables for fabrication of earth electrode of 10 Mtr/6 Mts length or as directed by the field engineer. |
| 427 | Equipments erection |
| 428 | Labour for erection of 160 MVA,230/110kV with OLTC and NIFPS. |
| 429 | Labour for erection of 25 MVA,110/33kV with OLTC. |
| 430 | Labour for erection of 16 MVA,110/11kV with OLTC. |
| 431 | Labour for erection of 33/22/11kV station transformer with own crane arrangement. |
| 432 | Labour for erection with own crane arrangement and connecting link rod, SF 6 gas filling and,& other consumables, & as directed by the field Engineer- SF6 Circuit Breakers 230KV |
| 433 | Labour for erection with own crane arrangement and connecting link rod, SF 6 gas filling and,& other consumables, & as directed by the field Engineer. - SF6 Circuit Breakers 110KV |
| 434 | Labour for erection with own crane arrangement for VCB 33KV/11 KV as directed by field Engineer. - 33KV/11KV (6+7) |
| 435 | Labour for erection with own crane arrangement, including providing holes wherever required , fixing junction box, & other consumables, & as directed by the field Engineer. - 230 KV CT,PT,CVT(one Single . Ph.unit).(18+6+9) |
| 436 | Labour for erection with own crane arrangement, including providing holes wherewere required , fixing junction box, & other consumables, & as directed by the field Engineer. - 110 KV CT,PT,CVT (one Single . Ph.unit).(36+6+5) |
| 437 | Labour for erection of 33/11 KV measurement transformers, reactors unit (one single phase or 3 phase unit)including providing holes whereever required ,fixing Junction box by using manual labour or owns crane arrangement (one S.Ph.Unit) (18+21+3+1) |
| 438 | Labour for erection of C.T/P.T/CVT junction box to 230KV,110KV side including fabrication of clamps.(11+18) |
| 439 | Lightning Arrestors |
| 440 | Labour for erection of LAS,single stage or multi stage including fabrication of base if required- Station type 230kV LAS with surge monitor. |
| 441 | Labour for erection of LAS,single stage or multi stage including fabrication of base if required -Station type 110kV LAS with surge monitor. |
| 442 | Labour for erection of LAS,single stage or multi stage including fabrication of base if required- Station type 33 & 11kV LAS.(9+6) |
| 443 | Labour for erection of LAS,single stage or multi stage including fabrication of base if required - Distribution type 33 & 11kV LAS. (12+12) |
| 444 | Isolators |
| 445 | Labour for erection of AB Switches, including cost of lubricant, consumable, and wiring (if necessary) alignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer. -230 KV with earth, motor operated isolator |
| 446 | Labour for erection of AB Switches, including cost of lubricant, consumable, and wiring (if necessary) alignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer. -230 KV without earth, motor operated isolator |
| 447 | Labour for erection of AB Switches, including cost of lubricant, consumable, and wiring (if necessary) alignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer.- 230 KV without earth, motor operated isolator (Top Switch to be erected in elevated structure) LC Rate |
| 448 | Labour for erection of AB Switches, including cost of lubricant, consumable, and wiring (if necessary) alignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer. -110 KV with earth, motor operated isolator |
| 449 | Labour for erection of AB Switches, including cost of lubricant, consumable, and wiring (if necessary) alignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer. -110 KV without earth, motor operated isolator |
| 450 | Labour for erection of AB Switches, including cost of lubricant, consumable, and wiring (if necessary) alignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer.- 110 KV without earth, motor operated isolator (Top Switch to be erected in elevated structure) LC Rate |
| 451 | Labour for erection of AB Switches, including cost of lubricant, consumable, and wiring (if necessary) alignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer. -33 & 11 KV without earth. (13+15) |
| 452 | Labour for erection of HG fuse 3 pole set 33 / 22 / 11 KV |
| 453 | Battery Sets, Chargers and Control Panels |
| 454 | Labour tools for Charging Battery |
| 455 | 220V DC , 300 AH |
| 456 | 110V DC , 300 AH |
| 457 | 48V DC, 400 AH |
| 458 | Labour for Battery including assembling of wooden stand,painting of acid proof paint. |
| 459 | 220V DC , 300 AH |
| 460 | 110V DC , 300 AH |
| 461 | 48V DC, 400 AH |
| 462 | Control Room Equipments |
| 463 | Labour for the Erection of Control Panels |
| 464 | Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/Relay Panels of Grid type (P&C) |
| 465 | Duplex panel feeder Control/Relay Panels of Grid type (P&C) |
| 466 | Labour for the erection of Insulator single pole stack for supports/Underhang |
| 467 | 230 KV |
| 468 | 110 KV |
| 469 | Up to 33/11kV |
| 470 | Bus Related |
| 471 | Labour for the stringing of Strung bus including hoisting of insulators. |
| 472 | 230kV Single Conductor Strung (1 Span,3 Runs) |
| 473 | 230kV Double Conductor Strung (1 Span,6 Runs) |
| 474 | 110kV Single Conductor Strung (1 Span, 3 Runs) |
| 475 | 110kV Double Conductor Strung (1 Span, 6 Runs) |
| 476 | 33/11kV Single Conductor Strung (1 Span, 3 Runs) |
| 477 | Labour charges for erection of Busbar including fabrication and any Modifications of End Clamps, wherever necessary as directed by the field engineer. |
| 478 | without making bend 75 mm Aluminium tube (1 length) |
| 479 | with making bend 75 mm Aluminium tube (1 length) |
| 480 | without making bend 50 mm Aluminium tube (1 length) |
| 481 | Labour for providing Droppers and jumpers. |
| 482 | Control cables, glands, wirings |
| 483 | Labour for laying of cable in duct/trunch including the cost of Alu.tag for identification. |
| 484 | Up to 8 Core |
| 485 | Above 8 Core |
| 486 | Labour for laying of cable and clamping in structures. |
| 487 | Up to 8 Core |
| 488 | Above 8 Core |
| 489 | Labour for provision of Cable end glands |
| 490 | Labour for excavating and refilling of trench of average width of 0.3M and average depth of 0.6M for earthmat trench and 0.4M for cable trench below yard level and of any size/depth narrow excavation. |
| 491 | Hard gravel soil |
| 492 | SDR (Not required blasting) |
| 493 | MR-DMR (Not required blasting) |
| 494 | Refilling of excavated soil for earthmat |
| 495 | SAS INSTALLATION |
| 496 | Installation, Testing , complete configuration of SAS of 230/110kV sub-station and 110/33-11kV substation RTU - LDMS system SAS Integration for 33kV and 11kV bays of entire bays in the sub-station inclusive of training by registered agency. |
| 497 | Installation, Testing & Commissioning of Numerical Line differential protection relays for remote end shoolagiri 400kV PGCIL sub-station for one 230kV line with necessary associated materials and inclusive of SAS integration. |
| 498 | Installation, Testing & Commissioning of Numerical Line differential protection relays for future remote end sub-station for one 230kV line with necessary associated materials and inclusive of SAS integration. |
| 499 | Installation, Testing & Commissioning of Numerical Line differential protection relays for future remote end sub-station for one 110kV line with necessary associated materials and inclusive of SAS integration. |
| 500 | Yard lighting& Other items |
| 501 | Labour charges for erection of Yard light poles including laying of cable inside pole |
| 502 | Labour for erection of LED lamp 72 watts with fixture and fuse box including wiring,testing etc |
| 503 | Manufacturing and supply and fixing of LC/KEY board out 75×25 mm aluminium frame embaded with 12 mm pre laminated wood particle board using screw on rear 2 nos plain glass of 5 mm thick fixed with metal roller moving on Alu.chanel should be provided on front with locking arrangements. |
| 504 | Labour charges for drawing layout and writing details in LC/KEY board including cost of enamul paint and other consumables as directed by the field Engineer. |
| 505 | Labour for writing details in finished surface boards including cost of enamul paint and other consumabls as directed by the field Engineer |
| 506 | Manufactring & supply of Yard light box of size 200W×200D×150H mm out of 18SWG (1.2mm) M.S.Sheet with cable entry holes,fixing arrangements for fuse units and mounting clampsas directed by the field Engineer including cost of all materials. |
| 507 | Fabrication,supply and fitting of CT/PT Junction box size 400W×150D×300H mm out of 14SWG (2mm)M.S.Sheet wherever required as directed by the field Engineer.The box shall be vermin proof shall have sturdy hinges,provision for mounting terminal blocks and and locking arrangements including cost of all materials.(For 33kV, 11kV CT's & PT's) |
| 508 | Fabrication,supply and fixing of A.C.distribution box of size 750W×250D×750H mm out of 14SWG (2mm)M.S.Sheet wherever required as directed by the field Engineer.The box shall be vermin proof shall have sturdy hinges,provision for mounting MCB and MCCB,detachable gland plate and locking arrangements including cost of all materials. |
| 509 | Station Accessories |
| 510 | Supply and glanding of ISI mark cable glands of suitable size of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer. |
| 511 | 19 mm |
| 512 | 25 mm |
| 513 | 28 mm |
| 514 | 32 mm |
| 515 | 35 mm |
| 516 | 45 mm |
| 517 | Supply and termination of cable core end including the cost of cable socket (lug) ferrules Al.tags stropes etc., as per cable schedule and as directed by the field engineer.(No.of core ends in unit of 1000). |
| 518 | Supply and erection of \\"B\\" class G.I.pipe for extension of tandum/down pipe for A.B.Switches and for any other work required as directed by the field engineer including cost of GI pipe.. |
| 519 | 40 mm Dia |
| 520 | 50 mm Dia |
| 521 | Supply & fixing of ISI mark bakelite HRC/ rewireable fuse holder in panels/boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. |
| 522 | 16 AMPS |
| 523 | 32 AMPS |
| 524 | 63 AMPS |
| 525 | Supply and fixing of ISI mark HRC Fuse without holder of reputed make in panels/boxes for AC/DC/PT circuits wherever required as directed bythe field engineer. |
| 526 | 2/5/10 AMPS |
| 527 | 32 AMPS |
| 528 | 63 AMPS |
| 529 | Supply and fixing of ISI mark porcelain rewirable fuse unit of reputed make in panels/boxes for A.C circuits wherever required as directed by the field engineer. |
| 530 | 100 AMPS |
| 531 | 200 AMPS |
| 532 | Supply and fixing of 3 phase 4 pole MCB of reputed make ISI mark in panels/box for AC/P/T circuits wherever required as directed by the field engineer. |
| 533 | 32 AMPS |
| 534 | 63 AMPS |
| 535 | Supply and fixing of ISI make MCB (AC) in panels /Boxes of reputed make as directed by the field engineer. |
| 536 | 2 pole,32 AMPS |
| 537 | Supply and fixing of ISI make MCB (DC) in panels /Boxes of reputed make as directed by the field engineer. |
| 538 | 2 pole,32 AMPS |
| 539 | Supply and fixing of AC 3 phase, 4 pole 415V ISI mark changeover switch of reputed make as directed by the field engineer. |
| 540 | 63 Amps |
| 541 | 100 Amps |
| 542 | 200 Amps |
| 543 | Supply and fixing of mounting channel suitable for CBTM 5 terminal block in panel/box as required and directed by the field engineer. |
| 544 | Supply and fixing of disconnected type terminal block suitable for CT circuits in panel/box as required and directed by the field engineer. |
| 545 | Supply and fixing of flexible copper tape/rope for interlinking panel earthing and for any other purpose,on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer. |
| 546 | Copper Lugs of Suitable sizes for Crimping at both ends of the braided copper. |
| 547 | Others |
| 548 | Labour charges for removing rust, primer coat, first & second coat painting both sides & in M.S.board RS Joist & yard light pole etc., including cost of enamel paint (Dulex,Asian, Berger preferred) and other consumables directed by the field Engineer. |
| 549 | Labour charges for painting Earth raisers by green enamel painting and wherever required including the cost of paint(Dulex, Asian, Berger paints) and other consumables as directed by the field engineer. |
| 550 | Supply & fixing of (Godrej) 6lever Navtal lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer. |
| 551 | Supply and providing of 600mm mean dia,300mm height 36mm thick cement coller for identification of earth electrode location including 1primer and 2 coats of colour wash as directed by field Engineer. |
| 552 | Fabrication,supply & fixing of main equipment board of size 2500×1500mm out of 14SWG M.S sheet as per drawing as directed by the field engineer including cost of all materials. |
| 553 | Fabrication,supply & fixing of individual equipment board of size 750X450 mm out of 14SWG M.S sheet as per drawing |
| 554 | Fabrication and fixing of bell mouth providing jumper connection in solid core insulator including cost of 50 mm dia GI pipe of 1 Mtr & other conumables as directed by the field engineer. |
| 555 | Supply & erection of M.S rod of 6mm dia for fencing barricade for LAS Fencing |
| 556 | Supply & Provision of 2.5 Sq mm multi strand single core flexible cable for panel wiring work for any other purpose as directed by field Engineer |
| 557 | Hire charges of crane providing (12 Tonns) for any erection or loading or unloading or shifting of equipments done by contractor |
| 558 | Providing 4 No's watch & ward personnel (For morning shift-1 person,2Nd shift-1 Person and Night shift-2 Persons) from the date of handing over of site to till date of comissioning of SS. |
| 559 | Supply of CCTV Cameras of reputed make with high resolutions (704 × 480) for Day and Night Monitoring of the entire Switch Yard Area of size 200 × 120 m with 2000 m, Necessary connecting Cables including One Number Digital Video Recorder of reputed make with multiple Port of 24 way with all accessories & Two Numbers LED TV of reputed make of size 42\\" for monitoring of CCTV Cameras with 15 Days Storage Capacity. |
| 560 | Supply and erection of HDPE Pipes for single core cable erection for structures for additional insulation 50 mm/38 mm Dia |
| 561 | UPS (3kVA) along with LED bulb for emergency lighting of control room |
| 562 | Booklet containing all drawings,test results,equipment details,comissioning and handing over report . |
| 563 | Erection of 25kW Roof top Solar Power Plant with Bi-Polar Panels with all accessories Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 33 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender