Tender For Addition/Alteration Cum Special Repairs To Offrs, Jcos/Or Md Accn At Gopalpur Mil Stn
Tender Value
4.03 Crore
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
4.78 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration Cum Special Repairs To Offrs, Jcos/Or Md Accn At Gopalpur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE \\"A\\" : |
| 2 | Item No 01 : Demolition of brick work built in cement mortar including all quions, arches, pillars etc complete all as spd and directed. |
| 3 | Item No 02 : M&L for brick work with sub class \\"B\\" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 4 | Item No 03 : M & L for brick work with fly ash modular bricks straight or curved on plan exc 6m mean radius in CM 1:4, built in cement mortar complete all as specified and directed. |
| 5 | Item No 04 : M&L for Post construction Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. |
| 6 | Item No 05 : M&L for Treatment of soil using emulsion for Post construction Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed. |
| 7 | Item No 06 : M&L for Post construction Anti termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 ltr per hole by drilling 6mm dia holes at a downward angle of 45° @ 150mm centre to centre and sealing the same complete all as specified and directed |
| 8 | Item No 07 : M&L ATT for Switch boards including removing the cover carefully and inserting adequate amount of chemical (powder) and closing the cover complete all as specified and directed |
| 9 | Item No 08 : Taking up or down steel tubing and connections, including cleaning for re-fixing of 15 mm bore of pipe complete all as specified and directed. |
| 10 | Item No 09 : Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm bore of pipe complete all as specified and directed. |
| 11 | Item No 10 : Supplying and laying of CPVC 15mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 12 | Item No 11 : Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 13 | Item No 12 : Supplying and laying of Brass Elbow 16 mm cpvc outer dia with all fittings and fixed on walls/ceiling or laying in floors complete all as specified. |
| 14 | Item No 13 : Supplying and laying of Brass tee 16 mm cpvc outer dia with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 15 | Item No 14 : Supplying and laying of male brass treaded adaptor 16 mm cpvc outer dia with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 16 | Item No 15 : Supplying and laying of female brass treaded adaptor 16 mm cpvc outer dia with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 17 | Item No 16 : Supplying and laying of UNION adapter 16 mm cpvc outer dia with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 18 | Item No 17 : Supplying and laying of TANK adaptor 20 mm cpvc outer dia with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 19 | Item No 18 : Supplying and laying of Brass Elbow 20 mm cpvc outer dia with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 20 | Item No 19 : Supplying and laying of Brass tee 20 mm cpvc outer dia with all fittings and fixed on walls/ceiling or laying in floors complete all as specified |
| 21 | Item No 20 : M & L for cutting and chasing in brick wall for concealed water tubing and making good in DM 1:4 n.exc 10 cm in girth complete all as specified and directed. |
| 22 | Item No 21 : Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for shelves, lintels etc complete all as specified and directed. |
| 23 | Item No 22 : M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast blocks etc. with necessary form work complete all as specified and directed. |
| 24 | Item No 23 : M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 25 | Item No 24 : Taking down chowkhat frame with shutter (without taking out shutter from frame) n exc 1.50 Sqm and removing from site complete all as specified and directed. |
| 26 | Item No 25 : Taking down chowkhat frame with shutter (without taking out shutter from frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed. |
| 27 | Item No 26 : S & F for Factory made double rebated extruded WPC (Wood Polymer Composite) solid door window/ Cosolory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 28 | Item No 27 : S & F for Factory made single rebated extruded WPC (Wood Polymer Composite) solid door/ window/ Coselory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 29 | Item No 28 : Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per directions of Engineer-in-charge |
| 30 | Item No 29 : S & F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 850 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N) edge), minimum compressive strength 60 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size will necessary full body threaded star headed countersunk S.S. screws, all as per direction of Engineer-in-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 31 | Item No 30 : S & F Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for edge and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be filled in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side plain PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauze shall be stretched to tighten firmly --- supplied and fitted to chowkats complete all as specified. |
| 32 | Item No 31 : M & L for Cutting holes exc half brick but n.exc one brick in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed |
| 33 | Item No 32 : S&F Mild steel works as in hold fasts, clamps, plain alignments for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming complete all as specified and directed. |
| 34 | Item No 33 : Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane (using 4mm or appropriate thickness (Area of window upto 1.00 sqm) comprising of uPVC multi chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge.Note : (A) Area not exc 1.00 sqm each.(B) The unit rate quoted by contractor includes cost of glawss and all toher connected accessories. |
| 35 | Item No 34 : S&F factory made uPVC white colour Sliding Window three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm). Window profile with hollow section with multi chamber, frame (58mm x 62mm), sliding sash (42mm x 67mm), Sliding mesh sash (20x65mm), sliding interlock (one vertical length in each shutter) (45.5mm x 28mm), glazing bead (24.5mm X 19mm) will be mitered, cut and fusion welded at all corners, including rail-ing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanized steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (20mm X 10mm), profile to be inserted in required-profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.35mm nominal dia of wire and average width of aperture 1.40mm and required accessories 5.5mm thick glazing with ordinary glass and gauge as required at site.Note : (A) Area not exc 2.00 sqm each .(B) The unit rate quoted by contractor includes cost of glass and all other connected accessories. |
| 36 | Item No 35 : S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 37 | Item No 36 : M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 38 | Item No 37 : S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed |
| 39 | Item No 38 : S & F 150 mm MS ordinary rat tail pattern spring including roller & roller plate complete as directed |
| 40 | Item No 39 : S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed |
| 41 | Item No 40 : S & F stainless steel butt hinges \\"medium weight\\" steel 100mm size as directed. |
| 42 | Item No 41 : S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 43 | Item No 42 : S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed. |
| 44 | Item No 43 : S & F aluminium alloy anodised sliding door bolt 300mm long with strap and staple (butt, type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified. |
| 45 | Item No 44 : S&F 18 /19 MM THICK factory made solid Foam WPC profile for kitchen cabinet frame and shutter of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded frame) having density 600 Kg/cum and the exposed edges sealed with PVC edge banding of same shade and colour. The frame shall be fire retardant with necessary screw holding capacity. Frame shall be fixed to wall using Expandable Fastner with necessary stainless steel screws, all complete as per direction of Engineer-in-charge.as Kitchen cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed. |
| 46 | Item No 45 : S & F 40 mm dia, cupboard knobs polished, hard wood knobs fixed with screws for kitchen cabinet & below platform. |
| 47 | Item No 46 : S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or electrogalvanised fixed with screw to timber frame work complete all as specified and directed |
| 48 | Item No 47 : S & F Magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and directed |
| 49 | Item No 48 : S & F 100mm size aluminium handle fabricated type anodised complete all as specified and directed. |
| 50 | Item No 49 : S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 51 | Item No 50 : Demolition of cement concrete as in sunken floor filing complete and cleaning of all loose particles and removing debris out of MD land. |
| 52 | Item No 51 : Cleaning the sunken surface by sweeping and removing all loose material, dirt etc and brushing with neat cement slurry @ 3Kg/Sqm. |
| 53 | Item No 52 : Laying of 30 mm thick (min) PCC M20 (Nominal mix) using 12.5 mm graded stone aggregate mixed with integral water proofing compound as per manufacturer's instruction on bottom of sunken portion with proper slope towards spout. |
| 54 | Item No 53 : Applying rendering 15 mm thick in CM (1:3) mixed with liquid water proofing compound as per manufacturer's instruction , and surfaces finished even and smooth with using extra cement on sunken portion of WC/Bath while PCC is green. The rendering should be extended to vertical sides of sunken portion.Note: WPC will be measured and paid separately. |
| 55 | Item No 54 : S & F GI pipe 40 mm dia light grade as in spout pipe in sunken portion of WC/Bath to drain out seepage water. The spou pipe shall be extended 450 mm from outer face of wall, complete all as specified |
| 56 | Item No 55 : Providing and applying two coats of polymer based chemical (Dr Fict Pidin 2K or Sika Top Sed-107 or Fasrod Brushbond 110 or equivalent of any other approved make) as per manufacturer's instructions as water proof coating over bottom and sides of sunkenportion after carry out proper surface preparation including removing loose concrete, foreign materials, cleaning of concrete surface, etc pre dampning of concrete surface, complete all as specified and as directedNote : (i) This Application shall be done after laying all sewage/ plumbing pipes with all futures in position. (ii) Affer application of thetreatment, testing shall be done for water tightness by pounding for 72 hours and any leakagelseepage noticed, same shall be rectified by the contractor before claiming the payment aginst this items) |
| 57 | Item No 56 : M&L cement concrete 1:5:10 type E-2 using granded crushed brick aggregates as in sunken portion of WCSath etc complete all as specified and as directed |
| 58 | Item No 57 : M&L for 76 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of complete all as specified and as directed |
| 59 | Item No 58 : Supply only liquid water proofing compound |
| 60 | Item No 59 : Diamanting of floor hearth or wat ting including cement mortar bedding and backing coat and removing serviceable es to store yard and rubbish off the premises complete all as specified and directed |
| 61 | Item No 60 : M&L for joint free non siad ceramic coloured ties 7 to 8 mm thick area of each the exceeding 12 sm but not exceeding 0.38jegm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed or bedding layer 15mm thick in CM 16 complete alt as specified and directed |
| 62 | Item No 61 : M&L for joint free non skid ceramic coloured ties 7 to 8 mm thick area of each tie exceeding 12 age but not ending 3agm, in vertical surfaces such as dadolskirting with and including 10 mm thick backing coat in CM 14 complete all as specified anddirected |
| 63 | Item No 62 : M&L for Glazed ceramic ties in vertical surface 360 260x 7 mm 450K 350K 7 thick set and jointed in neat cament slurry and pointed in white or colour cement to match the colour of ties over and including 10mm thick backing coat in CM 1:4 complete all asjapecified and directed |
| 64 | Item No 63 : Dismantling stone slab and tiles of any description and thickness in floors, aprons etc laid bedding and pointed in any mortar complete all as specified directed. |
| 65 | Item No 64 : SM&L for 20 mm thick black granite stone slab machine cut in cooking platform, jambs, pillars, windows sills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 66 | Item No 65 : M&L for 20 mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jambs, pillars, windows sills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed. |
| 67 | Item No 66 : Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and directed |
| 68 | Item No 67 : M&L machine cut prepolished kota stone slab flooring 15-20mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:6 all as specified (one piece on tread with white marble strip at mid section of 300 mm and bull nosing at the ends). |
| 69 | Item No 68 : All as per item No 67 above but factory made bull nosed as in riser of steps, skirting/dado/laid over 10mm thick in cm 1:4 complete all as specified. |
| 70 | Item No 69 : S & F in repair CP mild steel towel rail 20mm dia with end brackets and fixed with screw complete all as specified and as directed |
| 71 | Item No 70 : S & F is repair Stainless steel 304 grade fancy type curtain rod 25 mm dia and 0.25-.30 mm thickness including bracket/ wall to wall and latches each end complete all as specified and directed. |
| 72 | Item No 71 : S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length with rubber ring joints, fixed on walls including clamps and bolts & nuts and securing ends of stays to wall complete all as specified and directed. |
| 73 | Item No 72 : S & F in repair PVC (SWR) Pipes 110 mm bore single socketed in any length in trenches or in floors complete all as specified and directed. |
| 74 | Item No 73 : S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length with rubber ring joints, fixed on walls including clamps and bolts & nuts and securing ends of stays to wall complete all as specified and directed. |
| 75 | Item No 74 : S & F in repair PVC (SWR) Pipes 75 mm bore single socketed in any length in trenches or in floors complete all as specified and directed. |
| 76 | Item No 75 : S & F PVC (SWR) bends any radius 110mm size complete all as specified and directed. |
| 77 | Item No 76 : S & F PVC (SWR) bends any radius 75mm size complete all as specified and directed. |
| 78 | Item No 77 : S & F PVC (SWR) branch pieces, single (equal or un equal), ordinary oir inverted (pigot or socket type) or with parraled branches of 110 mm dia with access door complete all as specified and directed. |
| 79 | Item No 78 : S & F PVC (SWR) branch pieces, single (equal or un equal), ordinary oir inverted (pigot or socket type) or with parraled branches of 75 mm dia with access door complete all as specified and directed. |
| 80 | Item No 79 : S & F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 81 | Item No 80 : S & F PVC (SWR) vent cowl 75mm bore complete all as specified and directed. |
| 82 | Item No 81 : S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 83 | Item No 82 : S & F in repair, PVC (SWR) floor trap, 75 mm bore, plain with grating including jointing with solvent cement. |
| 84 | Item No 83 : S & F in repair, PVC (SWR) gully trap, 125/110 mm bore, plain with grating including jointing with solvent cement. |
| 85 | Item No 84 : S&F in repair of vitreous china squatting pan 'Orissa pattern' size 580 x 440 mm white with integral foot rest including replacement of 'P' or 'S' trap lime concrete bedding and making good floor complete all as specified and directed. |
| 86 | Item No 85 : S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and directed. |
| 87 | Item No 86 : S & F in repair 15mm bore PVC connection 450mm long with PTMT nuts and washer as directed. |
| 88 | Item No 87 : S&F in repair bib taps brass chromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule |
| 89 | Item No 88 : S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flansh screwed both ends for iron or for union. |
| 90 | Item No 89 : S & F in repairs 15mm bore, fancy type shower rose, chromium plated complete all as specified and directed. |
| 91 | Item No 90 : S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed. |
| 92 | Item No 91 : S&F 15mm dia solid brass chromium plated fancy type kitchen sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and as directed. |
| 93 | Item No 92 : S & F in repairs 15 mm Two way cock/Two way CP brass Angle cock with wall flange math chrome finish complete all as specified and directed. |
| 94 | Item No 93 : S & F in repairs 15 mm cp brass hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket flexible hose pipe must be made of ss 304 capable of withstand heavy water pressure etc, complete set of superior quality complete all as specified and directed. |
| 95 | Item No 94 : S&F in repair Gun metal globe or gate valves with iron wheel hand screwed both ends for iron pipe 15 mm dia.(fixed in repair) |
| 96 | Item No 95 : S&F in repair Gun metal globe or gate valves with iron wheel hand screwed both ends for iron pipe 20 mm dia.(fixed in repair) |
| 97 | Item No 96 : S&F in repair Tubular Towel Rail 20mm dia 'D' type, 600 mm long of CP fixed with and including chromimum plated brass screws and wooden/ plastic cleats. |
| 98 | Item No 97 : S&F factory made 600 x 450 mm beveled edge mirror 5.5 mm thick of selected quality glass and fixed to wooden plugs with chromium plated brass screws and cup washers (In repairs) complete all as specified |
| 99 | Item No 98 : S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and directed. |
| 100 | Item No 99 : S&F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed. |
| 101 | Item No 100 : S&F in repair Soap dish CP any size complete all as specified and directed. |
| 102 | Item No 101 : S&F in repair 450mm long Stainless steel six peg hanger chromium plated as approved by Engr-in-charge complete all as specified and directed. |
| 103 | Item No 102 : S&F in repair sink with drainage board size 1145x510 mm,bowl size 560x410x200 mm made of stainless steel 1.00mm thickkitchen or laboratory with plugs, washers and wastes pipe & coupling etc including bedding including cement mortar, dwarf wall or cantilever brackets and connection union to pipe all as specified and directed |
| 104 | Item No 103 : S&F in repair stainless steel 304 grade kitchen plate rack made out of 1.00 mm thick stainless steel of size 900 x600x250mm including screws and weight not less than 5.00 Kg complete all as specified and directed. |
| 105 | Item No 104 : S&F in repair PVC Grating doom 125 mm dia with waste hicle complete all as specified and directed. |
| 106 | Item No 105 : S&F in repair PVC Grating doom 100 mm dia with waste hole complete all as specified and directed. |
| 107 | Item No 106 : S & F in repair Hard/Rigid PVC waste Pipe with socket, 32 mm bore for WHB complete all as specified and directed. |
| 108 | Item No 107 : Supply and foding in repair Hard/Rigid PVC waste Pipe with socket, 40 mm bore for SINK complete all as specified and directed |
| 109 | Item No 108 : SS&F in repair Vitreous China wash basin including pedestal, white, fat back, size 550 x 400 mm, including foing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified. |
| 110 | Item No 109 : Supply and foding 32 mm Bottle trap of SS having minimum water seal of 25mm with complete fitting and future and in ready to use completed all as specified and directed |
| 111 | Item No 110 : Supply and fixing 40 mm Bottle trap of SS having minimum water seal of 25mm with complete fitting and fixture and in ready to use completed all as specified and directed |
| 112 | Item No 111 : S&F in repair for 15 mm bore CP pillar taps fancy type screwed down high pressure with long shanks and fly nuts screwed for iron pipe Hot or Cold with long screwed and fixed complete all as specided and directed |
| 113 | Item No 112 : Dismantling water tanks of capacity exc 500 & n exc 1000 tr complete al as specified and directed. |
| 114 | Item No 113 : S&F for rotational moulded tripple layered polyethylene water storage tank cylindrical, hoisted & foxed in position all as specified capacity 1000 Hrs complete all as specified and directed. |
| 115 | Item No 114 : S&F in repair 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed. |
| 116 | Item No 115 : Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified &directed. |
| 117 | Item No 116 : Material & Labour for 40 mm thick average thickness of PCC 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed. |
| 118 | Item No 117 : Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC @2% by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supplyonly rate), |
| 119 | Item No 118 : M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs-(a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster.(b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces.(c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame. (d) Applying two coats of aluminum paint on top of membrane @0.10Kg/Sqm. |
| 120 | Item No 119 : M&L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing finished with CM(1:3) redimix plaster after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note: Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account |
| 121 | Item No 120 : Taking down cement plaster/terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water all as specified. |
| 122 | Item No 121 : M&L for 15 mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed. |
| 123 | Item No 122 : M&L for Rendering 15 mm thick on brick work or concrete surface in two coat 1st coat 10 mm thick with CM 1:6 2nd coat with 5 mm thick cm 1:4 finished fair& even without using extra cement with water proofing compound as per manufactures instruction complete all as specified (Note:- WPC measured and paid saperately) complete all as specified and directed. |
| 124 | Item No 123 : M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement |
| 125 | Item No 124 : M&L for preparation of newly plastered surfacces and applying three coat of white wash as in ceiling complete all as specified and as directed. |
| 126 | Item No 125 : M&L for complete removal of existing treatment from old surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 127 | Item No 126 : M & L for applying two or more coats of 1st qualty acrylic distemper any tint (ready mixed) having VOcC content less than 50 gms/litre over 1 mm thick wal care putty, over a coat of alkali reslstant primer including filling depression of scrapped surfaces, nailimpressions, holes, etc with putty on newly plastered surface complote all as specified in SSR Part I and directed by Engr-in-charge.Note: (i) The paint& putty should be of approved manufacturer, of requlred shade and colour as approved by GE and complete atper manufacturer's specification.(ii) The paint should be applied by Roller only. |
| 128 | Item No 127 : M &L for complete removing existing okd surface treatment on wall (any number of layers) and opplying two of more coats of 1st quality acrylic distemper any tint (ready mixed) having VOC content less thian 50 gms/litre over 1 mn thick wall care puty, over a coat of alkali resistant primer including filing depression of scrapped surfaces, nail impressions, holes, etc with putty complete all as specified ln SSR Part l and directed by Engr-in-Charge.Note: (i) The paint& putty should be of approved manufacturer, of requlred shade and colour as approved by GE and complete atper manufacturer's specification.(ii) The paint should be applied by Roller only. |
| 129 | Item No 128 : M&L for applying Two or more coats of 100% Premium acryic emulsion paint having VOC less than 50 gm/itre and UV resistarnce as per iS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 itre/ 10 sqm over and incuding priming coat of exterior primer applied @0.90 litre/ 10 sam over old unplastered surfaces including preparing old surface Washing, rubbing down and stopping of distempered and painted surfaces complele all as as specified and as dirocted |
| 130 | Item No 129 : M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistarnce as per iS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 itre/ 10 sqm over and including priming coat of exterior primer applied @0.90 litre/ 10 sqm over newly plastered surfaces complele all as as specified and as directed |
| 131 | Item No 130 : M & L for raised pointing to random or polygonal rubble, un-coursed or brought upto courses in CM 1:3 and wall hight up to 12 mtr including necessary formwork and including taking existing own loose / damage pointing complete all as specified and directed. |
| 132 | Item No 131 : M&L for preparation of old steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete al as specified and directed. |
| 133 | Item No 132 : M&L heavy duty endura ceramic coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles notexceeding 0.18 sgm, in floor etc. set and jointed in neat cement slurry and pointing in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete. |
| 134 | Item No 133 : M & L for obiterating and painting building plaque with background using black synthetic enamel paint and building number with white synthetic enamel paint, overall area of plaque exc 0.1 sqm but n.exc 0.4 sqm each complete all as specified and directed. |
| 135 | Item No 134 : M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement including demolition of cement concrete in plinth protection ground floor complete all as specified directed.Note: Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. joints of 6 mm wide and 10mm deep shall be provided along the wall and bays and same shall be filed with bitumen mastic (1:3). |
| 136 | Item No 135 : M & L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc including demolition of cement concrete in sub base ground floor complete all as specified and directed. |
| 137 | Item No 136 : M & L for chequered cement concrete tiles 20 cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed or bedding layer 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismatling chequered tiles of any discription complete all as specified and directed. |
| 138 | Item No 137 : M&L in repair for providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts complete all as specified directed. |
| 139 | Item No 138 : Excavting in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum. Getting out, returing filling in and ramming earth or broken ruble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m complete all as specified and directed. |
| 140 | Item No 139 : M & L for PCC (1:3:6) type C-2 using 40mm graded stoen aggregate in foundation, filling & mass concrete complete all as specified and directed. |
| 141 | Item No 140 : S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of ancolour having tensile strrength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 142 | Item No 141 : S & F joist, channel, angle, or tee sections fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) complete all as specified and directed. |
| 143 | Item No 142 : S&F Rolled sections Fe 410-W (Gde- E 250) quality Aas in main and cross beams, hip and jack rafters, purlins frames connected with connecting plates cleats, etc. and including gusset plates etc. for sliding doors, fixed with eagle cleat or other connecting plates complete all as specified and directed. |
| 144 | Item No 143 : S&F Plates Fe 410 -W (Gde- E 250) q (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 145 | Item No 144 : Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface walls,floors etc complete all as specified and directed. |
| 146 | Item No 145 : Taking dow old unserviceable distribution boards by disconnection of electric connection carefully SFN DBs/TPN DBs/Main switches including old unserviceable MCCBs/MCBs, Isolator,etc and making good to distribution surface complete. |
| 147 | Item No 146 : Taking down carefully copper/aluminium sub main wiring of any size from surface/concealed/existing conduit of any height and removing materials at site and making good disturbed surfaces of wall,floors roofs etc complete all specified and directed. |
| 148 | Item No 147 : Taking down ceiling fan/exhaust fan of any sweep after disconnecting all accessory electrical connections from ceiling rose to fan blades and deposit to MES store yard of AGE E/M Gopalpur on Sea complete all as specified and as directed. |
| 149 | Item No 148 : Taking down existing single phase electric energy meter of capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M Gopalpur on Sea complete all as specified and as directed |
| 150 | Item No 149 : Material and labour for point wiring with circuit wiring from DB to control switch board complete with 1.5 sqmm , PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed /conduit MMS ever rigid /pliable/in grade (MMS) and including all accessories such as bend,tea,elbows,reducers,bell mouth pipe ends,chart pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth daily for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for the following:-(a) One light point controlled by one 10amps switch one way |
| 151 | (b) One fan/exhaust point controlled by one switch 10 amps with one regulator for fan |
| 152 | (c) One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board |
| 153 | (e) One 5 pin 10 amps socket point controlled by one 10 amps switch on same board. |
| 154 | (f) One bell/buzzer point controlled by one bell push. |
| 155 | (g) One light point controlled by two 2 way switches. |
| 156 | Item No 150 : All as per item No.149 (a) & (c) above, but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:-(a) One 6 pin 15/20amps socket outlet point controlled by one 16/20 amps switch on independent board. |
| 157 | (b) One 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board. |
| 158 | Item No 151 : All as per item No.149 (a) above, but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. |
| 159 | Item No 152 : Supply & fixing modular type switch 10 Amps, single pole, 1way, 1 module, 240V, AC, ISI Marked complete all as specified and directed. |
| 160 | Item No 153 : Supply & fixing modular type switch 10 Amps, 2way, single pole, 1 module, 240V, AC, with ISI Marked complete all as specified and directed. |
| 161 | Item No 154 : Supply & fixing modular type bell push 10 Amps, 1 module, single pole, 240 volts, AC, with embossing bell symbol & indicator, ISI Marked complete all as specified and directed. |
| 162 | Item No 155 : Supply & fixing modular type switch 16/20 Amps, single pole, 1way, 1 module, 240V, with small indicator, AC, ISI Marked complete all as specified and directed. |
| 163 | Item No 156 : Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module 240V, AC ISI Marked complete all as specified and directed. |
| 164 | Item No 157 : Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module, 240V, AC ISI Marked complete all as specified and directed. |
| 165 | Item No 158 : Supply & fixing red color lighting indication lamp switch, single pole, 240volts, AC, 50 Hz suitable for 1 module ISI Marked complete all as specified and directed. |
| 166 | Item No 159 : Supply & fixing modular type step fan speed regulator 120W, 2 module 230volts, AC, 360 degree rotation 0/1 to 5 steps, ISI Marked complete all as specified and directed. |
| 167 | Item No 160 : Supply and fix call bell ding dong AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed. |
| 168 | Item No 161 : Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate and superior quality-for batten fittings/bulbs complete all as specified and directed. |
| 169 | Item No 162 : Supply and fixing TV sockets one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed |
| 170 | Item No 163 : Supply & fix ceiling rose, 3 terminal, PVC/polycarbonate body ISI marked and superior quality complete all as specified and directed. |
| 171 | Item No 164 : M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated unsheathed flexible,multi stranded ,colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend, Tee, Elbow, Short pieces etc concealed in walls/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth daily and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note :- Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 172 | Item No 165 : All as per ditto item No 164, but 2 run x 4 sqmm+1 run earth wire complete all as specified and directed |
| 173 | Item No 166 : Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 42& IP54 DBs protection and making good the disturbed surfaces to match with existing surface and colour shade &complete all as specified and as directed. |
| 174 | Item No 167 : Supply & fix MCB SP 5 to 32 Amps 10 KA,\\"C\\" series, AC, 240Volts, 50Hz , ISI marked and including removing old unsv items complete all as specified and directed. |
| 175 | Item No 168 : Supply & fix and MCB SPN 40 to 63 Amps 10 KA,\\"C\\" series, AC, 240Volts, 50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 176 | Item No 169 : Taking down old unserviceable Geysers of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, Hot water and Cold water heavy duty connection pipes-02 Nos,holefastens-04 Nos and necessary accessories as per site requirement etc.complete all as specified and directed. |
| 177 | Item No 170 : Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor(BLDC) complete all as specified and directed |
| 178 | Item No 171 : Supply and fixing for energy efficient exhaust fan of 300 mm sweep made of metal body Vane/Air-DS type complete with louver with bolts nuts and washers sizes of the bolts 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan fixing including writing the MES number with synthetic enamel paint complete all as specified and directed (Note:-cost of suitable opening wall for fixing exhaust fan is deemed to be including in overall rate quoted.) |
| 179 | Item No 172 : Supply and fixing for energy efficient exhaust fan of 200 mm sweep made of sturdy/engineering plastic Venti Air-DS type complete with louver with bolts nuts and washers sizes of the bolts 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan fixing including writing the MES number with synthetic enamel paint complete all as specified and directed.(Note:-cost of suitable opening wall for fixing exhaust fan is deemed to be including in overall rate quoted.) |
| 180 | Item No 173 : Supply and fixing decorative wall mounted luminaire made out of M.S. & polycarbonate with black & brass body with white diffuser of dimension L160XW135XH24.5, Lamp base E27 unbreakable globe suitable for LED bulb and including providing of LED bulb 9/10 watts type, 220, 230 Volts AC with high efficiency, soft glare free light complete with LED lamp, holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed |
| 181 | Item No 174 : Supply and fixing of wall/surface mounted integrated batten, LED light luminaire of 4ft length with Up-Down twin side glow 20W+20W batten type wall mounted luminaire. CCT 6500K (CW) on down side & 3000K (WW) on up side & total system lumen not less than 2000Lm on each side Color Rendering Index (CRI) ≥80 long life of 35000hrs of operation, Fully diffused optics with eye comfort technology, inbuilt electronic driver PF >0.90 and THD <20% with operating voltage 160-270V AC, 50Hz inbuilt surge protection minimum 2.5 KV complete in all respects. all as specified and directed by Eng-in-Charge |
| 182 | Item No 175 : Supply and fixing LED light fitting mirror type with high cut out diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 183 | Item No 176 : S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opal diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. |
| 184 | Item No 177 : Supply and fix in replacement 45W Pressure die cast aluminium housing street light with system lumen of 6300 lm and system efficacy of 140 lm/w, IP-66, IK-10 single piece die cast incl spigot dia 48-75mm LED lifetime (L70B50) 75k Hrs with integrated optical cover .Street light should have standalone lighting control system with AUTO ON/OFF based on DUSK/DAWN timings ,preset time settings with monthly variations (Jan to Dec), inbuilt real time clock for switching, inclsds dimming profile for energy savings, drift not exceeding max 2mins/year. clock retention upto five years auto switching off abnormally power for module, dimmable driver based on PWM control, dim to off with high/low voltage cut off with 440V protection for 8 hrs for complete luminaire incl driver and astro module. surge protection as per IEC 61000-4-5 all as specified and directed by engineer in charge |
| 185 | Item No 178 : S&F for PVC non-metallic rigid conduit and boxes, junction boxes 1 to 4 way & terminals but incl of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts,saddles, pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN, telephone and TV connections cable,including cutting,chasing and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed |
| 186 | Item No 179 : Supply,installation,commissioning and testing indoor type LT wall mounted Panel of minium size 1.20m(height) x 1.20 m(breath) x 0.30 m (depth) factory made CPRI approved panel,weather,duster & varmin proof indoor double door, front operable, including four compartment for fixing of five Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber /PVC gasket of suitable size all sides of door .with copper busbar wrapped with PVC tapes /sleeves with maintained the colour code and copper strip /wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2 .0 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint over a coat red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5/2.5 sqmm copper wire and connections of all outgoing /incomming existing cable of any size complete all as directed. |
| 187 | INCOMING:-(a) Copper strip busbar of size 25X5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts,bolts & washers for cable connections including hydrophilic insulators with nuts & bolts at both ends-04 Nos(b) MCCB 4 Pole, 415Volts,Icu-25KA breaking capacity ,IP-44 and IP56/67 protection,125Amps rating adjustable thermal magnetic release including all fixing accessories with both ends spreaders links-01 No.(c) Digital voltmeter of range (0-500) volts,flush mounting type of size 100 mm x 100mm (4\\"x4\\") square dial with selector switch-01 Nos (Make - Legrand/Schneider/L&T)(d) LED Neon indicator lamp(RYB) with holder ,230/240Volts,AC-01set (set of three) |
| 188 | OUTGOING:-(a) MCB , single pole & neutral,40-63 Amps,240Volts'C' curve, 10 KA all complete all as specified and as directed-08 Nos.(b) MCB , single pole & neutral,20-32 Amps,240Volts'C' curve, 10 KA all complete all as specified and as directed-02 Nos.(c) Single phase, smart meter,AC,two wire,Tamper proof,static meter of class 1.0,240volts,50 Hz,Radio frequency 10Amps-60Amps, confirming to IS-16444 and relevant IEC standards with inbuilt 865-867 MHz radio frequency communication facility with self healing mesh network with default and external display ,billing data Generation facility,anti-tamper features,microprocessors and LED/LCD based circuit,Meter should support the following data: 30 min instantaneous data for voltage,current,power factor ,power,cumulative energy and frequency,30 read survey data for energy, monthly billing survey for cumulative energy and Max Demand. Meter should have connect/disconnect functionality operable compactable system from prepaid billing software in future.The meter should support open communication protocol compactable with the software-05 Nos. |
| 189 | Item No 180 : Supply, installation, commissioning and testing indoor type LT wall mounted Panel of minium size 1.0m(height) x 1.0 m(breath) x 0.30 m (depth) factory made CPRI approved panel, weather, duster & varmin proof indoor double door, front openable, including four compartment for fixing of five Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber /PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tapes /sleeves with maintained the colour code and copper strip /wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2 .0 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of powder coated paint over a coat red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5/2.5 sqmm copper wire and connections of all outgoing /incomming existing cable of any size complete all as directed. |
| 190 | INCOMING:-(a) Copper strip busbar of size 25X5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts,bolts & washers for cable connections including hydrophilic insulators with nuts & bolts at both ends-04 Nos(b) MCCB 4 Pole, 415Volts,Icu-25KA breaking capacity ,IP-44 and IP56/67 protection,125Amps rating adjustable thermal magnetic release including all fixing accessories with both ends spreaders links-01 No.(c) Digital voltmeter of range (0-500) volts,flush mounting type of size 100 mm x 100mm (4\\"x4\\") square dial with selector switch-01 Nos (Make - Legrand/Schneider/L&T)(d) LED Neon indicator lamp(RYB) with holder ,230/240Volts,AC-01set (set of three) |
| 191 | OUTGOING:-(a) MCB , single pole & neutral,40-63 Amps,240Volts'C' curve, 10 KA all complete all as specified and as directed-08 Nos.(b) MCB , single pole & neutral,20-32 Amps,240Volts'C' curve, 10 KA all complete all as specified and as directed-02 Nos.(c) Single phase, smart meter,AC,two wire,Tamper proof,static meter of class 1.0,240volts,50 Hz,Radio frequency 10Amps-60Amps, confirming to IS-16444 and relevant IEC standards with inbuilt 865-867 MHz radio frequency communication facility with self healing mesh network with default and external display ,billing data Generation facility,anti-tamper features,microprocessors and LED/LCD based circuit,Meter should support the following data: 30 min instantaneous data for voltage,current,power factor ,power,cumulative energy and frequency,30 read survey data for energy, monthly billing survey for cumulative energy and Max Demand. Meter should have connect/disconnect functionality operable compactable system from prepaid billing software in future.The meter should support open communication protocol compactable with the software-05 Nos. |
| 192 | Item No 181 : Material and labour for earthing complete with galvanised steel earth plate electrode 600mmx 600mmx 6mm thick buried directionally in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanized iron strip of size 32 x 6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh, including char coal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, RCC cover 1:2:4 type B1, including excavation, earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed. |
| 193 | Item No 182 : Material & labour for GI pipe 50 mm \\"light grade\\" laid in trenches floor/son , pole/roof for cable protection with all fittings complete all as specified and directed. |
| 194 | Item No 183 : Supply and fix GI bracket pipe of size 25 to 32 mm dia as suitable medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricated galvanised flat iron clamps of 20x4 mm thick -02 Nos suitable for fixing at any place/height with hole fastners, nuts, bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed. |
| 195 | Item No 184 : Material and labour for 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R pipe & brass threaded polypropylene random fittings fixed /concealed walls ceilings or in floors etc. ISI Marked IS 15801 lying in trenches/wall/ceilings or in floors with necessary clamps, saddles etc complete of size outer dia 32 mm complete all as specified and directed. |
| 196 | Item No 185 : Supply and fixing PPR gate valve(Brass insert) of dia 32 mm |
| 197 | Item No 186 : Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 x 75 mm by providing and fixing tee including cutting and making fusion joint etc |
| 198 | Road Path Culvert |
| 199 | Item No 187 : Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/ loose soil. |
| 200 | Item No 188 : M&L for 100 mm thick cement concrete 1:4:8 type C-2 using (40 mm graded stone agg) as in sub base |
| 201 | Item No 189 : Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point soil. |
| 202 | Item No 190 : M&L for machine pressed precast concrete coloured interlocking paver block any shape and size conforming to IS 15658:2006 of 60mm thickness M-35 Grade with grey cement and pigment complete all as specified |
| 203 | Item No 191 : M&L Sand for cushioning, including spreading and levelling in layers n.exc 25 mm thick. |
| 204 | Item No 192 : M&L for pcc 1:2:4 type C1 using 20mm graded stone aggregate as in bed blocks, coping etc including weathering slightly rounded or chamfered angles and throating making grooves for fixing of man hole cover including necessary form work |
| 205 | Item No 193 : M & L for cleaning, rubbing and preparing old/new surface for 2 coat of Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellowcomplete all as specified and directed by engineer in charge. |
| 206 | External Electric Supply |
| 207 | Item No 194 : Material and labour for laying XLPE insulated, armoured heavy duty electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 35 sqmm,3.5 core complete all as specified and directed. |
| 208 | Item No 195 : Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation of laying cable including getting out in soft/loose soil complete all as specified and directed. |
| 209 | Item No 196 : Returning filling ir. including spreading watering and well ramming in layers not exc 25 cm complete all as specifed. |
| 210 | Item No 197 : Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. |
| 211 | Item No 198 : M & L for brick sub class 'B' 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cable complete all as specified and directed. |
| 212 | Sewage Disposal |
| 213 | Item No 199 : Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) concrete all as specified and directed. |
| 214 | Item No 200 : M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring 100 mm thick complete all as specified and directed. |
| 215 | Item No 201 : Demolition of brick work built in cement mortar including all quions, arches, pillars etc all as specified and directed. |
| 216 | Item No 202 : M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:4 including built in cement mortar complete all as specified and directed. |
| 217 | Item No 203 : M & L for 15mm thick rendering in CM (1:4) on fair/ unfair faces of brick work finished even and fair complete all as specified and directed. |
| 218 | Item No 204 : Removing excavated material / soil exc 250 m but n, exc 500 m and depositing where directed. |
| 219 | Item No 205 : Demolition and breaking up drain pipes of 150mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified. |
| 220 | Item No 206 : Demolition and breaking up drain pipes of 200mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified. |
| 221 | Item No 207 : Demolition and breaking up drain pipes of 300mm internal dia of bore SGSW, AC or reinforced concrete pipe set in cement mortar complete all as specified. |
| 222 | Item No 208 : Supply, laying and jointing 150 mm nominal bore dia double wall corrugated (DWC) pipes class SN-8 confirming to IS-16098:2013 (Part-2) stiffness with and including necessary jointing materials complete all as specified and directed. |
| 223 | Item No 209 : Supply, laying and jointing 200 mm nominal bore dia double wall corrugated (DWC) pipes class SN-8 confirming to IS-16098:2013 (Part-2) stiffness with and including necessary jointing materials complete all as specified and directed.t including digging holes composting, watering etc complete |
| 224 | Item No 210 : Supply, laying and jointing 300 mm nominal bore dia double wall corrugated (DWC) pipes class SN-8 confirming to IS-16098:2013 (Part-2) stiffness with and including necessary jointing materials complete all as specified and directed. |
| 225 | Item No 211 : M&L concrete bed to 150 mm dia pipes of cement mortar 1:3:6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed. |
| 226 | Item No 212 : M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for end forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete |
| 227 | Item No 213 : M&L for cleaning of existing sewage pipe line 100mm /150mm/200mm internal dia at any depth including manholes by removing the manhole cover of any type/size and cleaning by means of hydraulic jet pressure machine/ manually (as directed by Engr-in-charge) as required at site from manhole and well flushing with water after cleaning including getting out sludge and disposal out of defence land, refixing the manhole in original complete all as specified and directed |
| 228 | Item No 214 : Cleaning of manholes any depth any size taking out accumulated, soil, sludge any material incl both ends and removal to MD lands and manhole cover refixing complete all as specified and directed by Engr-in-Charge. |
| 229 | Item No 215 : Sucking out sewage water through sewage tanker from the man hole/septic tank/soakage well in different location and disposal (5000 ltr capacity) of out of MD land as directed by Engr-in-Charge.(Each Tanker of 5000 Ltrs) |
| 230 | Item No 216 : M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete. |
| 231 | Item No 217 : M & L for Providing precast cement concrete 1:2:4 Type B1 (20 mm graded aggregate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary formwork complete all as specified and directed |
| 232 | Fencing 1.8M with RCC Poles |
| 233 | Item No 218 : Excavating in post holes in soft/loose soil (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 M and making good surface. |
| 234 | Item No 219 : M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate in foundation, filling & mass concrete all as specified |
| 235 | Item No 220 : Supply and Fixing for PVC insulated chain link fencing including link wire of size 3.15mm dia and galvanised steel Mesh Size 50 x 50mm made up in mattresses or coils, tapered wire and laid in position to rcc fencing and straining and fixing to any type of posts, straining bolts, standard bolts, incl securing and tying at crossing with and incl provision of galvanised mild steel wire staples or steel pins etc completed all as specified and directed. |
| 236 | Item No 221 : Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc, for fencing, average sectional area exc 100 sq. cm and n exc 250 sq cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed |
| 237 | Item No 222 : M&L for preparation of newly plastered surfaces and applying three coat of white wash as in wall complete all as specified and as directed. |
| 238 | Item No 223 : S & F Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long |
| 239 | Item No 224 : S & F GDE Fe410-W quality B Framed work as in ornamental type gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges complete all as specified and as directed |
| 240 | Item No 225 : M&L for preparation of newly steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide zinc chrome primer surfaces complete all as specified and as directed. |
| 241 | Item No 226 : M&L for TMT HYSD reinforcement bars 10mm over dia including all cutting bending binding cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed. |
| 242 | Item No 227 : Ditto same as item 226 above, but 6mm dia and over and upto including 10mm dia in stirrups, spacers and blinders completed all as specified and directed. |
| 243 | SCHEDULE \\"A\\" (Schedule of credit )Schedule of Credit Rs 408363.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount) SCHEDULE OF CREDIT Name of Work: ADDN/ALTN CUM SPL REPAIRS TO OFFRS, JCO'S/OR MD ACCN AT GOPALPUR MIL STN Sl No Decriptipin of work Unit Qty Rate Amount |
| 244 | Old brick masonry |
| 245 | Old u/s GI tubing 15mm |
| 246 | Old u/s GI tubing 20mm |
| 247 | Old u/s chowkhat with shutters including all fitting n.exc 1.5 sqm |
| 248 | Old u/s chowkhat with shutters including all fitting exc 1.5 sqm and n.exc 4sqm |
| 249 | Old u/s kitchen cabinet & CB shutter with frame |
| 250 | Old u/s hanging rods |
| 251 | Old u/s curtain rods |
| 252 | Old u/s Scrap Iron |
| 253 | Old u/s PVC pipe 100 / 75mm |
| 254 | Old u/s PVC flushing cistern |
| 255 | Old u/s PVC Connecticn any size |
| 256 | Old u/s CP bib tap/angle valve/stop cock/shower rose/pillar cock of any dia. |
| 257 | Old u/s Wall mixer / kitchen sink mixer / center hole WHB mixer any size |
| 258 | Old u/s C P Toway bib cock / twoway angle cock of any dia. |
| 259 | Old u/s C P hand shower (Health facut) of any dia. |
| 260 | Old u/s Gate valve any size |
| 261 | Old u/s towel rail any size |
| 262 | Old u/s PVC bath Cabinet mirror of any size |
| 263 | Old u/s soap dish |
| 264 | Old u/s Stainless steel six peg hangerof any size |
| 265 | Old u/s steel Sink with drainage board |
| 266 | Old u/s steel Plate Rack 900x750mm |
| 267 | Old u/s PVC tank 500/1000 ltrs |
| 268 | Old u/s ball valves 20mm size |
| 269 | Old u/s concrete paver block |
| 270 | Old unsv point wiring of any type/size |
| 271 | Old unsv switches, sockets,bell push,call bell,lamp holder, ceiling rose, buzer,dimmer,regulators,holders etc of any type |
| 272 | Old unsv sub main wiring of any type |
| 273 | Old unsv MCB DBs/TPN DBs any type |
| 274 | Old unsv MCB SP/SPN any type |
| 275 | Old unsv bulk head light fitting of any type |
| 276 | Old unsv tube light fittings of any type/rating |
| 277 | Old unsv light fittings of any type/rating |
| 278 | Old Unsv street lights and GI brackets in any size/watts |
| 279 | Old Unsv electric panel material any size/watts |
| 280 | Old unsv earthing complete material of any type/size |
| 281 | Old Unsv GI pipes of any size/dia |
| 282 | Old Unsv gate valves of any type /size |
| 283 | Old unserviceable UG cable of any type / size |
| 284 | Old Brick bats Total : 408363.0 Notes :- (a) All quantities shown under column 4 are provisional and may vary during execution. Actual amount of credit shall be worked out based on rates inserted under Col. 5 of Schedule of credit. (b) Tenderers are advised to inspect the old material/ items at site and ascertain their condition. It shall be deemed that the contractor has made himself well aware and ascertained the condition of these items whether he inspects them or not. No claim whatsoever on this account shall be admissible by the Government. The mode of measurement shall be same as for the work to executed. tenderers are requested to verify the condition of the materials, any dispute arises at later stage will not be entertained. (c) The items as indicated in Schedule of credit shall be the property of the contractor. The total amount of Schedule of credit shall be deducted from total of Schedule „A' [BOQ] to arrive at Contract Sum. (d) The rates inserted under Column 5 are firm and the contractor shall have no claim what so ever against the department if the actual value of dismantled materials turns out to be different from the cost given by the department. (e) All above materials shall be recorded in MB jointly by Engineer-in -Charge and contractor. (f) No rebate on Schedule of credit shall be accepted. Signature of contractor For Accepting Officer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender