Tender For Repair And Maintenance Of Ht Distribution Network And Misc Equipments (Transformer, Rmu, Ht Panels God Etc) Of Dgqa Area Under Ge (Mh & Rh) Khadki.
Tender Overview
Project Description
Tender for Repair And Maintenance Of Ht Distribution Network And Misc Equipments (Transformer, Rmu, Ht Panels God Etc) Of Dgqa Area Under Ge (Mh & Rh) Khadki.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Nov-2026 | DATE CORRIGENDUM | Date | 01-Dec-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply and laying of HT underground cable XLPE insulated, PVC bedded flat wire armoured electric power cable heavy duty with stranded aluminium conductor 22000 volts grade and cross section area 95 sqmm 3 core confirming to IS 7098/(part-II) 1985 laid in trenches/passing through pipes or fixed on poles/wall/floor etc including dismantling of old HT cables complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as per Item No. 1 above but of size 120 Sqmm 3 core. |
| 3 | Supply and laying of HT underground cable XLPE insulated, PVC bedded flat wire armoured electric power cable heavy duty with stranded aluminium conductor 11000 volts grade and cross section area 95 sqmm 3 core confirming to IS 7098/(part-II) 1985 laid in trenches/passing through pipes or fixed on poles/wall/floor etc including dismantling of old HT cables complete all as specified and directed by Engineer-in-Charge. |
| 4 | M & L for cable jointing kit for 22 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following size and voltage grade including taking down old cable joint kit complete all as specified and directed by Engineer-in-Charge. |
| 5 | All as per item No 3 above but of Size 95 sqmm x 3 core |
| 6 | All as per item No 3 above but of Size 120 sqmm x 3 core to 185 Sqmm x 3 Core |
| 7 | All as per item No 3 above but of Size 240 Sqmm 3 Core to 300 sqmm x 3 core |
| 8 | M & L for cable jointing kit for 22 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following size including taking down old cable joint kit complete all as specified and directed by Engineer-in-Charge. |
| 9 | All as per Item No 4 above but of Size 95 sqmm x 3 core |
| 10 | All as per Item No 4 above but of Size 120 sqmm x 3 core to 185 Sqmm x 3 Core |
| 11 | All as per Item No 4 above but of Size 240 Sqmm 3 Core to 300 sqmm x 3 core |
| 12 | M & L for heat shrinkable HT 22 KV (earthed) straight through joint cable kit suitable for aluminium conductor cable of following size including taking down old cable joint kit complete all as specified and directed by Engineer-in-Charge. |
| 13 | All as per Item No 5 above but of size Size 95 sqmm x 3 core |
| 14 | All as per Item No 5 above but of Size 120 sqmm x 3 core to 185 Sqmm x 3 Core |
| 15 | M & L for cable jointing kit raych 22 KV Touch proof kit for HT 22 KV (Earthed) grade cable for indoor type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm to 300 Sqmm including taking down old cable joint kit complete all as specified and directed by Engineer-in-Charge. |
| 16 | M & L for cable jointing kit for HT 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 Sqmm including taking down old cable joint kit complete all as specified and directed by Engineer-in-Charge. |
| 17 | M & L for cable jointing kit for 11 KV of Size upto 3 core 95 sqmm (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm including taking down old cable joint kit complete all as specified and directed by Engineer-in-Charge. |
| 18 | M & L for heat shrinkable HT 11 KV (earthed) straight through joint of size upto 95 Sqmm cable kit suitable for aluminium conductor cable of size upto 95 sqmm 3 core including taking down old cable joint kit complete all as specified and directed by Engineer-in-Charge. |
| 19 | M & L in replacement of cable route indicator made out of Cast iron of dia 100 mm embrosed with HT cable with 25mm x 5 mm GI flat of length 1 mtr including painting with two coats of synthetic enamel red colour paint over a coat of primer to exposed surfaces complete all as specified and directed by the Engineer-in-charge. |
| 20 | S & F in replacement Switch Air break Gang operated HT 22 KV Volt grade out door type, triple pole of capacity 200 amps rating mounted on Polymer based 9 insulator and fitted on steel frame horizontally mechanically operated mechanism from ground level consisting of operating rod of 25 mm bore Heavy grade GI pipe of suitable length worked from ground level and with locking arrangements incl pad locks with key flat iron clamp 50 mm x 6 mm including taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 21 | Supplying, installing, fixing, connecting and testing of Polymer based Drop-out fuse set (set of 3 nos), mounted on insulators with steel frame 200 Amps capacity, siutable for 22 KV, HT system, out door type, including Expulsion fuse carriers and fuse element Upto 25 Amp, including taking down old unserviceable one complete all as specified and directed by Engineer-in-Charge. |
| 22 | M & L for Lightning arrester high tension expulsion type complete in repair with all fittings transmission class, discharge capacity 30 Kilo amps suitable for 22000 Volts supply including taking down old lightning arresters complete all as specified and directed by Engineer-in-Charge. |
| 23 | M & L for detect HT 11 KV/22 KV cable fault for various size of cable with technician round the clock at CQA (FEE), CQE(EE), CQE(tech area) CQA (ME) , HT sub stations at all Insp Org area and other locations under GE (MH & RH) khadki detect the cable fault and necessary excavation of soil and refilling the soil, joint the faulty cable with new straight through joint kit, after jointing, testing, and charging of HT cable complete all as specified and directed by Engineer-in-Charge.Note: (i) Cable joint required size measured and paid separately (ii) Each job considered cable fault locator use in one day |
| 24 | Taking down and dismantling of old unserviceable rusted damaged steel tubular pole 9 mtr/ 11 mtrs long of any type complete all as specified and directed by Engineer-in-Charge. |
| 25 | Taking down and dismantling of old unserviceable rusted damaged cross-arms, bracing, supports, clamps and back plates of any type complete from site . |
| 26 | M & L for errecting in repair steel tubular swaged poles in true vertical position ( or to be fixed in an inclined positon as strut pole) steel tublar swaged poles complete with MS base plate of 6 mm thick of size 450x450 mm finial taper plug , pole cap,bolts ,nuts and washer and screwd pole made out of ERW MS tubing confirming to IS -2713 (part-II) 1980 type 410 SP-55 (11 meters long) pole including drilling of holes of required size an Nos for fixing of cross arms, painting with one coat of red oxide primer and two copat of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete , etc complete all as specified and directed by Engineer-in-Charge. |
| 27 | M & L in repair for cross arms, bracing, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washer, welding,bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat and one finishing coat of paint complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 28 | M & L in repair for cross arms, bracing, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washer, welding,bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat and one finishing coat of paint complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender