Tender For Repairing And Replacement Work Of Lighting System At Ramkanta Bose Street Uttaran And Different Other Uttarans In Ward No-08
Tender Value
1.97 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
10 days left
EMD
4000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Replacement Work Of Lighting System At Ramkanta Bose Street Uttaran And Different Other Uttarans In Ward No-08
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE OF RATES FOR OVERHEAD LINE INSTALLATION -REPAIR 14. Dismantling steel tubular/Rail/Strut embedded in CCfoundation incl. excavation, filling of holes, restoring surface,loadingat site and delivering, unloading, sorting, stacking properly at anyplace as per direction upto a lead of 1.6 km |
| 2 | Outdoor Lighting Installation, Steel Tubular Pole, M.S. Pipe, G.I. Pipe,Pole CAP etc Supplying of Swaged Steel Tubular pole as per IS2713, Pt. II, 1980 for following designation and of followingdimensions.(Outside dia & thickness are given in Annexture -1)g) 410SP - 21 ; 8.5 Mtr., 129.00 Kg. |
| 3 | S/F arm bracket of 50 mm bore tubular Pipe (M.S.) of 1. 5 m (5')length for fixing on 75/100 mm pole top including S/F 4 mm thickM.S. plate welded with bolts, nuts & clamps, etc. as required withfabrication work |
| 4 | SCHEDULE OF RATES FOR OH LINE INSTALLATION (LTDISTRIBUTION).Erection of Poles.Erection of Single Steel tubularpole of length as given below with/without sole plate & Cap etc. in CCfoundation (Proportion and dimension indicated below), having600x600x150 mm thick CC (4:2:1) base block below sole plate/polewith hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cementedfinish and GI earth bolt after making drilled holes etc. on pole &carriage of pole upto 1.6 Km from Store to work(site including fillingup the excavated earth pit with shifted soil and ramming properlyUpto9.0 mtr. Size 0.6x0.6x1.70 mts |
| 5 | SCHEDULE OF RATES FOR EARTHINGINSTALLATIONS.Earthing Installation ... with Pipe Electrode.Earthingwith 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GIbolts, double nuts, double washers incl. S & F 15 mm dia GI pipeprotection (1 Mts. long) to be filled with bitumen partly under theground level and partly above ground level driven to an averagedepth of 3.65 Mts. below the ground level as below:(a)By ISI MediumGI pipe. |
| 6 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, asgiven below with ready mixed paint/primer of(approved make, andbrand incl. preparation of surface by sand paper/emery paper,cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. longpole.(i)1st coat of aluminium paint over 1 coat of RO priming |
| 7 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, asgiven below with ready mixed paint/primer of(approved make, andbrand incl. preparation of surface by sand paper/emery paper,cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. longpole.ii2nd coat of aluminium paint over 1st coat |
| 8 | A N N E X U R E - I Basic Rate of Materials: (All Rates of materialsfrom K-1 to K-14 are excluding VAT) 130. 150mm GI pipe(ISI-Medium) |
| 9 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. B. REPAIRING 2. Welding in M.S. structural work withgas or electric: (b) Continuous weld. |
| 10 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length orshape departmental R.S. joists,channels, angles, tees, plates etc.(Payment to be made on area of cut surface) |
| 11 | Extra on items 1& 2 above, FOR providing CC (6:3:1) base blockaround the pole) dimension 0.45x0.45x0.60 mt. above ground level,neatly cemented finish (3) mm thick), at the base pole (in lieu of CCmuffing) incl. drilled hole in pole suitable FOR alkathene/polythenepipe entry, FOR street light wiring, without Loop Box |
| 12 | S/F of special head type M S loop box (3 mm thick) with connectingbar and other accessories fixed on the top the pole as required andas per direction of Engineer-In-Charge. For 3 phase connection. |
| 13 | SUPPLYING & DELIVERY OF SINTEX 2 FRP WHITEWATERPROOF TYPE LOOPING CABLE BOX SIZE 200X300X125MM DEEP, 4 MM THICK, HAVING INSULATION RESISTANCEGREATER THAN 200 MOHM, IP66; COMPRISING OF ONE NO SPMCB, 4 NOS. TERMINAL CONNECTOR HAVING VOLTAGEGRADE OF 1.1 KV, ONE COMPRESSION TYPE BRASS CABLEGLAND FOR UPTO 4 CORE16 SQMM PVC/A CABLE AS PERRATE OBTAINED FROM GEM PORTAL |
| 14 | Fixing only TPN MCBDB in Sheet Steel enclosure (4 to 12 way) onflat iron frame on wall 415V TP/TPN |
| 15 | Supplying Al.conductor PVC insulated and sheathed unarmoredcable(1.1KVgrade, Gloster/Havells/Polycab).10sqmm x 4core |
| 16 | Supply and drawing of 7/14 SWG galvanised stranded wire fordrawing unarmored cable (supply of cable is not included in thescope) by catenary system of wiring with 3nos. reel insulator per mtr.and binding with binding wires etc,as reqd. for drawing |
| 17 | Supplying Al.conductor PVC insulated and sheathed unarmoredcable(1.1KVgrade, Gloster/Havells/Polycab). 6sqmm x 2core |
| 18 | Laying on Wall / surface with Saddles / clamps.(a)Laying of cableupto 2 core 25 sqmm on wall/surface incl. S & F MS saddles withearthing attachment in 10 SWG GI (HOT Dip) Wire, making holesetc. as necy. mending good damages and painting |
| 19 | Erection of Galv. (HOT Dip) Cross arms/ `D... IronClamp7).Supplying & Erection of Galv. `D... iron complete withsuitable pole clamp 75mmx88mm porcelain shackle insulator & 15mm dia Galv. bolts & nuts. incl. painting |
| 20 | A N N E X U R E - I Basic Rate of Materials: (All Rates of materialsfrom K-1 to K-14 are excluding VAT) 145. Galv. Straining screw12\\"x5/8\\" dia |
| 21 | Removing of luminaries with lamp from the pole/column and keepingthem ready for dispatch as per direction of EIC: HPMV/HPSVluminaries/MH/LED street light fittings. |
| 22 | Fixing only Floodlight fittings on top of masonary structure by 3 Nos.10 mm dia x 87 mm long rag bolts, nuts & double washers completeeither 37 mm x 10 mm MS flat support/or by other means as required |
| 23 | SUPPLY AND DELIVERY OF 40 WATT LED STREET LIGHTFITTINGS OF ANY SUPERIOR MAKE AS PER KMC LAST STOREPURCHASE RATE WITH 5(FIVE) YEARS WARRANTY FROMORIGINAL EQUIPMENT MANUFACTURER |
| 24 | Sub Total |
| 25 | GST 18% |
| 26 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender