Tender For Construction Of A Store And Rooms Beneath The Pavilion At Bida Stadium.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
4 days left
EMD
70000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Alwar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of A Store And Rooms Beneath The Pavilion At Bida Stadium.
BOQ
| Sl. No. | Item Description |
| 1 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 2 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish : 20mm thick. |
| 3 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 4 | Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision New Work |
| 5 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 35 mm thick .Decorative teak veneer both side |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 7 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm long embedded in C C block 15 x 10 x 10 Cm of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 50 x 25.0 mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel powder coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction of Engineer-in –charge. Window openable. |
| 8 | Extra for additional shutter in pipe section windows with wire gauge 14 mesh x 24 gauge |
| 9 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint |
| 10 | Providing dab stone over Chajjas duly fixed in cement sand mortar 1:6 complete : 50 mm thick |
| 11 | Brick Work: 75 mm thick brickwork with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand). |
| 12 | Add extra for square or rectangular pillars in superstructure brickwork up to five storey. Up to 45 cm length and two corners are free. |
| 13 | Cement Concrete Flooring:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a coat of neat cement including cement slurry, making of lines or grooves, complete but excluding the cost of nosing of steps etc. Complete. 75 mm thick with 20 mm thick nominal size aggregate. |
| 14 | Providing and Fixing Heavy Duty Copper Wound Double Ball Bearing and Metal Sturdy Mesh Guard: Aluminium alloy one-piece blade wall mounting oscillating type air circulator as per PWD specification for electrical works, conforming to IS:2997, including fixing with anchor bolts, regulator making connection, testing etc. as required. OEM shall be an ISO certified company. Appropriate OEM test certificate shall be submitted by contractor. All as per approved drawing by Engineer in charge. For additional technical parameters of products/work, refer Annexure \\"A\\" attached with this BSR-450 mm sweep with wall mounting and three-speed regulator. |
| 15 | Wiring of twin control light / fan / call bell point as per PWD specification for electrical works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS (IS:9537 P-III) virgin material PVC conduit and its all accessories (J.B., bends etc.), round tiles, 2 nos. 18 SWG G.I. box with earth terminal, 2 Nos. 6 A two-way switch, 3 pin ceiling rose / Lamp holder / 3 point Connector, 3.0 mm thick ISI marked phenolic laminated sheet (IS:2036-1995), Al. alloy/cadmium plated iron screws, 20 mm cup washers etc., all as per pre-approved by Engineer-in-Charge, making connections, testing etc. complete as required. For specification of copper conductor, phenolic laminated sheets & electrical/wiring accessories refer Chapter E-04, E-05 & E-07. For additional technical parameters of products/work, refer Annexure \\"A\\" attached with this BSR. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender