Tender For Annual Rate Contract For The Work Of Construction And Commissioning Of Bore Hole By Dth Rig, Supply And Installation Of Energy Efficient Submersible Pump Sets, Panels, Cables And Other Allied Works Including Commissioning And Testing Of Tu
Tender Value
1.50 Crore
Estimated cost
Bid Submission
23 Nov 2026
15 days left
EMD
3 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhilwara → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Rate Contract For The Work Of Construction And Commissioning Of Bore Hole By Dth Rig, Supply And Installation Of Energy Efficient Submersible Pump Sets, Panels, Cables And Other Allied Works Including Commissioning And Testing Of Tube Well Under Jurisdiction Of Circle Bhilwara With 02 Year Defect Liability.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Tube Well up to 100 mtr. depth in all type of rocks by DTH system & over burden to accommodate casing pipe of following sizes in all types of soils & over burden including lowering of casing pipes, (if required) excluding cost of casing pipes, as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work would be completed after obtaining sand free water. The tube well should have a through out bore as per nominal dia of casing pipe. Rates are exclusive of GST. |
| 2 | Nominal bore 125 mm dia. |
| 3 | Add 15% extra on above item (2) for drilling depth beyond 100 mtr, If depth of bore is more than 100 mtr. Rates are exclusive of GST. |
| 4 | Nominal bore 150 mm dia. |
| 5 | Nominal bore 200 mm dia. |
| 6 | Add 15% extra on above item (Item No 4 to 5) for drilling depth beyond 100 mtr and up to 200 mtr from ground level, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr. Rates are exclusive of GST. |
| 7 | Add 15% extra on above item (Item No 4 to 6) for drilling, where strata is collapsible and lowering of casing pipe is required . The work includes lowering of casing pipe, but excluding the cost of casing pipe. The rate shall be applicable for stretch of collapsible strata only.Rates are exclusive of GST. |
| 8 | Deepening of existing tube well by DTH system beyond existing depth up to 100 mtr. and above in all type of rocks including flushing of tube well and obtaining sand free water. Rates are exclusive of GST. |
| 9 | Nominal bore 150 mm dia. |
| 10 | Nominal bore 200 mm dia. |
| 11 | Testing verticality of tube well by plumbing system and yield test and draw down test by pumping system as per IS : 2800 (Part – II) – 1979 or as per amended up to date. Rates are exclusive of GST. |
| 12 | Development of tube well having depth up to 250 mtr as per IS: 11189- 1985 and IS: 2800 (Part- I)- 1991 (both amended up to date) using suitable methods to give sand free water for required yield of the gravel packed tube well. Rates are exclusive of GST. |
| 13 | Supply of ERW M.S. black casing pipe ISI marked {IS:1239(Part-1:2004)} medium of following sizes at site of work. Rates are exclusive of GST. |
| 14 | 125 mm dia NB( Thickness of pipe 4.8 mm & mass of tube 16.40 Kg/m) Rates are exclusive of GST. |
| 15 | 150 mm dia NB(Thickness of pipe 5.0 mm & mass of tube 20.13 Kg/m) Rates are exclusive of GST. |
| 16 | 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m) Rates are exclusive of GST. |
| 17 | Providing & laying ISI marked GI Pipe Light duty ( “A” class) as per IS: 1239 for casing pipe for submersible cable external work 40 mm dia complete in all respect.Rates are exclusive of GST. |
| 18 | Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. Rates are exclusive of GST. |
| 19 | Up to 2.0 KW |
| 20 | Above 2.0 KW |
| 21 | Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. Rates are exclusive of GST. |
| 22 | Up to 5.5 KW (7.5 HP) & head up to 120 mtr. |
| 23 | Up to 5.5 KW (7.5 HP) & head above 120 mtr. |
| 24 | 7.5 KW (10 HP) & head up to 120 mtr. |
| 25 | 7.5 KW (10 HP) & head above 120 mtr. |
| 26 | 9.3 KW (12.5 HP) & head up to 120 mtr. |
| 27 | 9.3 KW (12.5 HP) & head above 120 mtr. |
| 28 | 11 KW (15 HP) & head up to 120 mtr. |
| 29 | 11 KW (15 HP) & head above 120 mtr. |
| 30 | 13 KW (17.5 HP) & head upto 120 mtr. |
| 31 | 13 KW (17.5 HP) & head above 120 mtr. |
| 32 | 15 KW (20 HP) & head upto 120 mtr. |
| 33 | 15 KW (20 HP) & head above 120 mtr. |
| 34 | Supply and Fixing of Electric feeder panel (having projected canopy)for submersible pump set Single phase up to 5 HP, comprising of DOL Starter, MCB, Indicating Light, Ammeter, Volt meter, connection plate, condensers of approved make and the panel enclosure should be made out from 18 gauge M.S. Sheet with powder coating. Panel size Height 600 mm Width 500 mm depth 250 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The operation of panel should be suitable for on 240 Volt AC Supply. Rates are exclusive of GST. |
| 35 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, DOL starter, overload relay, ampere meter, volt meter, phase preventer, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 300mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. Rates are exclusive of GST. |
| 36 | Up to 5.00 HP |
| 37 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. Rates are exclusive of GST. |
| 38 | Above 5 HP and up to 10 HP |
| 39 | Above 10 HP and up to 15 HP |
| 40 | Above 15 HP and up to 20 HP |
| 41 | Above 20 HP and up to 30 HP |
| 42 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. Rates are exclusive of GST. |
| 43 | 3 core 4.0 Sq.mm |
| 44 | 3 core 6.0 Sq.mm |
| 45 | 3 core 10.0 Sq.mm |
| 46 | 3 core 16.0 Sq.mm |
| 47 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. Rates are exclusive of GST. |
| 48 | 10.0 Sq.mm, 4 core |
| 49 | 16.0 Sq.mm, 4 core |
| 50 | 25.0 Sq.mm, 3.5 core |
| 51 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. Rates are exclusive of GST. |
| 52 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. Rates are exclusive of GST. |
| 53 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. Rates are exclusive of GST. |
| 54 | 125 mm dia |
| 55 | 150 mm dia |
| 56 | 200 mm dia |
| 57 | Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. Rates are exclusive of GST. |
| 58 | 32 mm dia |
| 59 | 50 mm dia |
| 60 | 65 mm dia |
| 61 | 80mm dia |
| 62 | Providing & Lowering in tube well ISI marked HDPE pipe as per IS 4984:1995 or amended up to date in PE 80 grade and class PN 10 of following dia. including HDPE/GI fittings and PVC rope confirming to IS 5175:1992 or amended up to date, along with clamping of submersible cable etc. complete in all respect. Rates are exclusive of GST. |
| 63 | 40 mm dia |
| 64 | 50 mm dia |
| 65 | 63 mm dia |
| 66 | 75 mm dia |
| 67 | 90 mm dia |
| 68 | Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended up to date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia.Rates are exclusive of GST. |
| 69 | 50 mm dia |
| 70 | 65 mm dia |
| 71 | 80 mm dia |
| 72 | Providing & Fixing pump safety cage as per specifications or as directed by Engineer in charge. Rates are exclusive of GST. |
| 73 | Providing and Fixing of ISI marked PVC storage tank of following capacity as per IS: 12701-1989 (of approved make) with cover, 25 mm dia. 1 mtr long GI overflow pipe, 25 cm long 25 mm dia washout GI pipe with plug & socket, including P&F 32 mm dia Ball Cock (Float valve) IS 1703 marked with rod and PVC ball complete with brass weight 1000 gm, including P&F 15mm dia CI quarter turn heavy duty Bib Cocks four no's of superior quality and approved make, including interconnections complete job. Rates are exclusive of GST. |
| 74 | 1000 litres capacity |
| 75 | 2000 litres capacity |
| 76 | Fabrication & Fixing M.S. Stand of specified class of angle iron L-shaped of 50 mm size with four legs grouted by 300*300*300 mm CC Block M-15 in the ground and all legs tied up with each other through same size of angle iron along with cross bars to support the bottom of 1000 Ltr./ 2000 Ltr. PVC tank complete in all respect. Rates are exclusive of GST. |
| 77 | Providing & Fixing of double flanged, CI body, ISI marked NRV of approved make of following sizes. Rates are exclusive of GST. |
| 78 | 65 mm dia |
| 79 | 80 mm dia |
| 80 | Proving and Fixing 32 mm dia Full way valve or wheel valve as per IS:778 or amended up to date of approved make, on pump delivery pipe. Rates are exclusive of GST. |
| 81 | Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover. Rates are exclusive of GST. |
| 82 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Rates are exclusive of GST. |
| 83 | Manually Operated CI Sluice valve of Class PN-1.0 |
| 84 | 80 mm HW |
| 85 | 100 mm HW |
| 86 | Providing, lowering, aligning, fixing in position in pipe line, CI double flanged swing type Non Return Valves (NRV) of approved make of following Pressure rating & dia complete, confirming to IS: 5312 (part -1)/ 2004 (amended up to date) and of following specifications: Body, Cover & disc of Grey cast iron of IS:210/ FG200. Face to face dimensions as per IS 5312 (part -1):2004 , Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body, cover and disc inside and outside . Body seat ring of SS/CS Door face ring - EPDM/ Neoprene (food grade quality) ,Shaft of SS- AISI- 410 ,Hinge Malleable cast iron / SS AISI 316 ,Bonnet Gasket EPDM, Bush- Leaded tin Bronze/ PTET, Gasket EPDM/NBR ,Nut-Bolt as per IS:1363 and IS: 1367 (galvanised steel) ,Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Rates are exclusive of GST. |
| 87 | Class PN 1.0 |
| 88 | 80 mm dia |
| 89 | 100 mm dia |
| 90 | Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality) ,Body seat of SS ,Face to face dimensions as per API: 594 ,Flanges Drilled as per IS:1538. Epoxy (Non-Toxic & suitable for drinking water) applied on body & cover inside and outside . Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR \\"O \\"ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) ,Insertion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Rates are exclusive of GST. |
| 91 | Class PN 1.0 |
| 92 | 80 mm dia |
| 93 | 100 mm dia |
| 94 | Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended up to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS 6418 or Screwed type shall have external pipe threads conforming to IS 554 Fasteners - CS Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work. Rates are exclusive of GST. |
| 95 | Class PN 1.0 |
| 96 | 15 mm S-1 Type |
| 97 | 25 mm S-1 Type |
| 98 | 40 mm S-1 Type |
| 99 | 50 mm S-2 Type |
| 100 | Class PN 1.6 |
| 101 | 15 mm S-1 Type |
| 102 | 25 mm S-1 Type |
| 103 | 40 mm S-1 Type |
| 104 | 50 mm S-2 Type |
| 105 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Rates are exclusive of GST. |
| 106 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 |
| 107 | 80 mm dia |
| 108 | 100 mm dia |
| 109 | Providing, lowering, aligning, fixing in position in pipe line, DI double flanged resilient seated Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Disc / plates - SG-400/12 or CF-8M,Face to face dimensions as per API: 594 , Flanges Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body and cover inside and outside . Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 410 , Hinge SS AISI 316/304,Spring SS AISI 316/304,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR \\"O \\"ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) , Insertion rubber of black EPDM 6mm thick .Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Rates are exclusive of GST. |
| 110 | Class PN 1.6 |
| 111 | 80 mm dia |
| 112 | 100 mm dia |
| 113 | SITC of DOL/Star Delta Starter Digital type Electric Control Feeder Panel with projected canopy for three phase pump set, comprising MCCB, Electronic Protection relay with fault indicators (O/L,UC, Unbalance, E/f, L/R, Phase reversal, Phase loss protection), AC-3 duty power contactor(s), or/and S/D Timer selected as per OEM certified Type-2 Coordination chart of PHED approved makes conforming to IEC 60947-4-1, Voltage monitoring relay (with adjustable under-voltage, over-voltage, phase failure and phase sequence protection), Capacitor 440V AC Heavy duty MPP type capacitor of suitable kVAr rating, multifunction digital meter with three-line display(V,A,F,PF, run hr.), Auxiliary NO+NC contacts, indicating lamps, push buttons, control circuit and contactor coil protection through suitable SP MCB(C curve,10KA), power and control wiring with properly crimped lugs,Al Bus Bar with Colour coated heat shrinkage sleeves lighting arrangement etc complete with internal wiring, testing and commissioning as required. Panel enclosure, IP-55, fabricated from 18-gauge thick TATA/Essar make CRCA sheet, duly treated and powder coated (minimum 70 micron DFT), minimum size 900 × 600 × 300 mm, mounted on MS angle stand (35 × 35 × 5 mm) with four legs of 18\\" length, double door with inbuilt locking system. The legs shall be embedded in M-15 cement concrete platform of minimum 200 mm height above ground level, with base dimensions equal to or larger than the panel base size. The panel shall have a suitable front opening with glass window for installation and reading of energy meter (to be supplied by DISCOM). Suitable for operation on 415V AC supply, complete in all respects as per specifications and direction of Engineer-in-Charge. |
| 114 | Upto 5 HP (DOL type) |
| 115 | Above 5 HP and up to 10 HP (Star Delta type) |
| 116 | Above 10 HP and up to 15 HP (Star Delta type) |
| 117 | Above 15 HP and up to 20 HP (Star Delta type) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender