Tender For Work Of Plaster Repair, Doors, Water Storage Tank Etc. At The Site Office Building Pocket-D, Buddha Enclave, Lohianagar.
Tender Value
5.33 Lakhs
Estimated cost
Bid Submission
09 Dec 2026
21 days left
EMD
11000
Bank guarantee accepted
Document Fee
1150
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Plaster Repair, Doors, Water Storage Tank Etc. At The Site Office Building Pocket-D, Buddha Enclave, Lohianagar.
BOQ
| Sl. No. | Item Description |
| 1 | DSR/2023/15.56 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.(54.65X0.7418 = 40.54) |
| 2 | DSR./23/3.1.1 -12mm cement plaster of mix. 1:4 (1 cement : 4 fine sand) (347.05X0.7418 257.44) |
| 3 | DSR/23/13.88 - Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (0.7418 X 19.75 =14.65) |
| 4 | DSR/23-13.80 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (156.05 x 0.7418=115.76) |
| 5 | DSR/23/13.85.3 - Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content (With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre) (0.7418 X 73.95 = 54.86) |
| 6 | DSR/23/13.82.2- Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour - Two coats (0.7418 X 137.45 = 101.96) |
| 7 | DSR/23/13.99.1 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (One or more coats on old work) ( 0.7418 X 102.80 = 76.26) |
| 8 | DSR/23/26.87.2-Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) (35 mm thick) (0.7418 X 5015.35 = 3720.39) |
| 9 | DSR/23/18.48 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(0.7418 X 11=8.16) |
| 10 | DSR.NO 22.1 - Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of: (i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement: 3 coarse sand) including applying of twice (at base and top of mortar) cement slurry @ 2.2kg/m2 (each time) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions. (iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.(1515.60x .7418 = 1124.27) |
| 11 | DSR/23/11.41.2 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. ( Size of Tile 600x600 mm) (0.7418 X 1553.45 = 1152.35) |
| 12 | DSR/23/8.31 - Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(0.7418 X 1267.95= 940.57) |
| 13 | AR - Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 12.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 14 | DSR./23/13.1.1 -12mm cement plaster of mix. 1:4 (1 cement : 4 fine sand) (347.05 X 0.7418 = 257.44) |
| 15 | DSR/2023/4.1.2 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1.1½.3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources 3 graded stone aggregate 20 mm nominal size derived from natural sources (0.7418 X 8340.85 = 6187.24) |
| 16 | DSR/5.22.2 - Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete below plinth level. - Hand drawn steel wire (0.7418 x 95.80 = 71.06) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender