Tender For Road Safety Work At Munsifi Gate Bidhuna (In Exit Gate) On Sirsaganj Kishni Bidhuna Road (Sh-103).
Tender Value
2.27 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
13 days left
EMD
25000
Bank guarantee accepted
Document Fee
856
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Auraiya → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work At Munsifi Gate Bidhuna (In Exit Gate) On Sirsaganj Kishni Bidhuna Road (Sh-103).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous /granular surface cleaned with mechanical broom. |
| 2 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 complete in all respects. |
| 3 | Providing and laying Bituminous Concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder CRMB-55 @ 5.4% of mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with mechanical control to the required grade, level and alingment, rolling with smooth wheeled bibratory and tendom rollers to achiev the desired compection as per MORTH specifiaction clause 509 complete all respect |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. As per S.O.R. 1 Ch. Trafic Sign. |
| 5 | Provding & Laying of hot applied thermoplastic compound 5 mm thick including relectorising glass beads @ 500 gms per sqm ares. Thickness of 5mm is exclusive of surface applied glass beads as per IRC : 35-2015 The finished surface to be level, uniform and free from streaks and holes. |
| 6 | Supply and fixing of relective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylontrite) of HIPS (Hi impact Polystyrene) of acrylonitrile butadiens styrenc (ABS). The marher shall supported a load of 1355 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably be 35 + 50 to base and ares of each retro- reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer. Dimensions of road studs should not be less than 100mmx100mmx10mm RPM (with shank) as per ASTM |
| 7 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC : 67-2012 made of high intensity greade sheeting wide clause 801.3 friced over aluminium sheeting Type-IV 1.5mm thick supprorted on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67-2012 & proof of the same in form of government report shall be uploaded while quoting tender.(7.1) 60 cm equlateral tringle with diffnitation plate size (20cm x 60cm) |
| 8 | 60 cm Circular with diffnitation plate (20cm x60cm) |
| 9 | 80 x 60 mm Rectangular with diffnitation plate(20cm x60cm) |
| 10 | 60mm x 45mm mm Rectangular with diffnitation plate (20cm x60cm) |
| 11 | 60cm x 60 cm square with diffinition plate (20cm x 60cm) |
| 12 | Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting. The retor reflective sheeting tyep-IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC-67:2012 & proof of same in form of government report shall be uploaded while quoting tender. vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing |
| 13 | Providing and fixing of Standard Metal Delineator as per IRC 79-2019 of minimum retro reflective unit exposed area of 330 square cm in white color, full cube corner micro prismatic non-metalic retro reflective sheeting on each side conforming with IRC 67-2012 and meeting the coefficient of retro reflection values as per ASTM D minimum 40 microns thickness. The delineator shall be painted with powder coat of pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. The front and back faces of te delineator should be curved with a radius of not more than 200mm and with delta angle (or central angle of curve) lying between 20 degree and 30 degree to increase the visibility of the delineator for veghicles moving in continuous curves, The delineator shall have grooves across the length to mage the reflective sheets vandal-proof) The retor reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & Proof of the same in form of government report shall be uploaded which quoting tender. If somehow tendor pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The delineator is meant for application on gaps in median traffic islands, dangerous bends, roundabouts, narrow bridges etc. of as desired by site engineer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender