Housing Urban and Rular Development Boards / Undertakings / PSU Closing in 11 days TDR #58416287

Tender For Development/Construction Of Pond Retaining Wall, Walking Path , Reinforced Cement Concrete Drain , Guard Room And Toilet Block At Sector - 7A, Avadh Vihar Yojana, Lucknow.

Issued by Boards / Undertakings / PSU · Lucknow, Uttar Pradesh
Tender Value
1.41 Crore
Estimated cost
Bid Submission
02 Dec 2026
11 days left
EMD
2.85 Lakhs
Bank guarantee accepted
Document Fee
5310
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Development/Construction Of Pond Retaining Wall, Walking Path , Reinforced Cement Concrete Drain , Guard Room And Toilet Block At Sector - 7A, Avadh Vihar Yojana, Lucknow.

BOQ

Name of Work:- Development/Construction of Pond Retaining wall, Walking path , RCC Drain , Guard room and Toilet block at Sector - 7A, Avadh Vihar Yojana, Lucknow.
Sl. No. Item Description
1Earth work in excavation by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm. on plan), excavated soil and disposal of surplus excavated soil as directed, within a lift upto 1.50 M lead upto 50m and dressing of sides & ramming of bottom as directed the Enginer I/C. all kinds of soils.
2Providing & laying cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) and curing complete, excluding cost of form work in foundation and floors.
3Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm (nominal size)
4Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not wrought to included in overall rates) wrought to required shape as necessary including bending and binding for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured upto floor two level.
5Centering and shuttering including struting, proping etc and removal of form work for : Retaining wall, return walls, walls(any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.
6Class-150 B/W in 1:6 cement & coarse sand F.M. 1.5 to 2.0 mortar in foundation & plinth including supply of all material, labour and T&P etc complete as per direction by E/I.
712 mm. cement plaster with in 1:6 cement and Hamirpur / Banda sand ( FM 1.5 to 2.0) mortar, including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. in girth and finished even and smooth. No. extra for mixing any additive. Exterior wall(fair side)
8Finishing wall with two coat of apex weather coat /equivalent make exterior paint over a priming coat of water proofing cement paint on approved quality such as super snocem, durocem, super quality of approved shade on undecorated wall surface with surface prepared with white Birla / equavalent putty of approved make to give an even shade after throughly brushing the surface to remove all dirt and remain of loose powdered material and rate is inclusive of cost of all material, labour T&P and curing etc. complete as per direction of E/I.
9Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10sqm. on plan including getting out and disposal of excavated soil as directed, within a lift upto 1.50 M lead upto 50m as directed the Enginer I/C. all kinds of soils.
10Construction of granular sub-base by providing close graded material, spreading in uniform layers with on prepared surface, mixing by mix in place method at OMC, and compacting with vibratory roller to achieve the disired density complete in all recpect and as per relevant clause of MORT & H section 401.
11Supply of 80mm thick precast cement concret interlocking paver blocks with top layer of minimum 8mm thickness having plan dimension 200x(160+120)mm of O.P. Cement smooth high gloss finish, skid resistant: manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrete paver block shall not be less than 30Mpa (M30) conforming to IS: 15658-2006 including cost of material, labour, T & P etc. required for proper of completion of the work as direction of E/I. Also including 50mm local sand bed as per technical specification clause 1504 SI.No. MORD 1500 (6.7 + Cost of sand = 980 + (0.05 Cum @ 1027.00) =1031.55 Per Sqm.
12De watering of Pond including pumping set, pump operator,diesel etc complete as per direction of E/I.
13Earth work in excavation by mechanical means (hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm. on plan), excavated soil and disposal of surplus excavated soil as directed, within a lift upto 1.50 M lead upto 50m and dressing of sides & ramming of bottom as directed the Enginer I/C. all kinds of soils.for mud/ foul condition
14Earth work in surface excavation above 30cm in depth but exceeding 1.5m in width as well as 10sqm. on plan including getting out and disposal of excavated soil as directed, within a lift upto 1.50 M lead upto 50m as directed the Enginer I/C. all kinds of soils.
15Earth work in surface excavation above 30cm in depth but exceeding 1.5m in width as well as 10sqm. on plan including getting out and disposal of excavated soil as directed, within a lift from 1.5m to 3.00m lead upto 50m as directed the Enginer I/C. all kinds of soils.
16Earth work in surface excavation above 30cm in depth but exceeding 1.5m in width as well as 10sqm. on plan including getting out and disposal of excavated soil as directed, within a lift from 3.0m to 4.5m lead upto 50m as directed the Enginer I/C. all kinds of soils.
17Close timbering in trenches including strutting, shoring & packing cavities (wherever required) complete (measurements to be taken of the face area timbered) Depth exceeding 3mtr. But not exceeding 4.5mtr.
18Steel works welded in built up sections/framed works including cutting ,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required : In gratings, frames, guard bar, ladder, rallings, brackets, gates and similar iron work in small size such as holding down bolts, hold fast, tie rods and angle door chaukhat etc wrought to required form including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work.
19Applying 2 coats of Superior enamel paint over one coat of primer over new steel and other metal / wood surface upto 10cm in width or girth or small articles not exceeding 0.10sqm area after and including preparing the surface by thoroughly cleaning-Oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wood. Scrapper sand papering and knotting including cost of all materials, labour T&P etc, required for proper completion of work.
20Supply & Fixing of expansion joint system (Make Vinayak Techno Products) related with wall joint (internal/external/Ceiling) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self-aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize lightweight aluminum profiles exhibiting minimal exposed Aluminum surfaces mechanically snap locking the multi cellular to facilitate movement. (Material shall confirm to ASTM 6063) Wall Joint of 50 MM Gap
21Providing and fixing PVC Pipe conforming to IS make working pressure 6 Kg./scm including testing labour T&P and all complete fittings. 75mm dia UPVC Pipe for weep hole in retaining wall
22S/F of steel Bench with side arms of cast iron 02 Nos. including seat & back of hollow M.S. rectangular pipes 2\\"x1 13 Nos. of 1.85 Mtr. Long welding for proper complete including bench leg fixing in PCC 1:1.5.3 4 Nos. size 30x20x15Cm with enamel paint two coat over a coat of primer all material & labour, T&P required for complete.
23Supply and fixing of MS jhula including painting etc. complete as per direction of E/I.
24Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation,foundation bolts, excavation & back filling and Required T&P complete in all respect.
25Supply & fixing SITC of 60W ALL-IN-ONE SOLAR LIGHT AIO Solar Street Light is made with High Efficiency 12V 90W Mono Crystalline Solar PV Module,12.8 42V Ah Lithium Ferro Phosphate battery with inbuilt BMS technology, Min-7800, Max-9000 lumens High Efficacy LED( OSRAM/NICHIA),50000 hours Burning Hrs, MPPT Solar Charge Controller and Aluminum Extruded body & is specially programmed to automatically control the dimming and brightness of light, which increases the backup time. Make:Wipro/Philips/Havells
26Supply and fixing of Arm Wheel SIZE(1300 x 610 x1350) of approved brand including all labour material T&P fright etc. complete as per direction of E/I.
27Supply and fixing of Double Wheel SIZE(900 x 900 x1550) of approved brand including all labour material T&P fright etc. complete as per direction of E/I.
28Supply and fixing of Chest Press SIZE(1800 x 750 x2150) of approved brand including all labour material T&P fright etc. complete as per direction of E/I.
29Supply and fixing of Sit Up Pull SIZE(2040 x 860 x1960) of approved brand including all labour material T&P fright etc. complete as per direction of E/I.
30Supply and fixing of Dual Sky Stepper SIZE(1545 x 680 x1700) of approved brand including all labour material T&P fright etc. complete as per direction of E/I.
31Supply and fixing of Leg Press-Double SIZE(1550 x 750 x1890) of approved brand including all labour material T&P fright etc. complete as per direction of E/I.
32Supply and fixing of Rowing MachineSIZE(1050 x 750 x900) of approved brand including all labour material T&P fright etc. complete as per direction of E/I.
33Providing and laying of Grade-20 R.C.C. work with cement, coarse sand of F.M. 2.20 to 3.60 and 20mm graded stone grit in Plinth Beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc and also including supply of all labour material T&P etc. required for proper completion of work. Binding wire will be supplied by the contractor .
34Centering and shuttering including struting, proping etc and removal of form work for Lintals, beams,plinth beams,girders, bressumers and cantilevers.
354.00 cm thick damp proof course and cement concrete consisting of 1 part cement, 1.5 part course sand and 3 part of approved 13mm graded stone grit and including water proofing materials as ordered by engineer in charge in proportion as specified by the manufacturers. as SI No 361
36Class 150 brickwok (230 mm thick) in 1:6 cement and Hamirpur/Banda sand ( FM 1.5 to 2.0) mortar in super structure above plinth level upto floor two level (upto two storey) including necessary cutting and moulding of brickwork as required and also including supply of all materials, labour and tools and plants etc, required for proper completion of the work.
37Class 150 brickwok (115 mm thick) in 1:4 cement and Hamirpur/Banda sand ( FM 1.5 to 2.0) mortar in super structure above plinth level upto floor two level (upto two storey) including necessary cutting and moulding of brickwork as required and also including supply of all materials, labour and tools and plants etc, required for proper completion of the work.
38Reinforced cement concrete work in beams, suspended floors,roofs having slopes upto 15 degree landings, balconies, shelves, chajjas, lintel bands, Slab plain window sills, stair case above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement :1 1/2 coarse sand (zone III): 3 graded stone aggregate 20mm nominal size)
39Centering and shuttering including struting, proping etc and removal of form work for Slab.
40Ceiling Plaster 1:3 (1 cement : 3 coarse sand) complete with all respect as per direction of E/I.
41Providing and fixing of 18mm thick gang saw cut, mirror polished, premoulded and pre polished, machine cut for kitchen plateform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curring, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(Area of slab over 0.50sqm)
42Supply and laying ( white /coloured ) Kazaria wall tiles ( Kazaria / Romano or other approved make by E/I. ) over 20 mm thick base of cement mortor of 1:4 (1 cement : 4 Coarse sand) laid and jointed with white cement (with pigment) slurry including rubbing and polishing complete over wall.
43Supply and laying ( white /coloured ) Kazaria floor tiles ( Kazaria / Romano or other approved make by E/I) over 20 mm thick base of cement mortor of 1:4 (1 cement : 4 Coarse sand) laid and jointed with white cement with pigment, rubbing and polishing complete over 8 cm thick 1:4:8 ( 1 cement, : 4 coarse sand FM 2.2 to 3.6 and : 8 stone ballast size 40mm gauge and ( Base concrete shall be paid separatly). 300x300 mm
44Supply and Fixing of 300x300mm chequred Tiles with over 20 mm thick base of cement mortor of 1:4 (1 cement : 4 Coarse sand) laid and jointed with white cement with pigment, rubbing and polishing complete over 8 cm thick 1:4:8 ( 1 cement, : 4 coarse sand FM 2.2 to 3.6 and : 8 stone ballast size 40mm gauge and ( Base concrete shall be paid separatly). 300x300 mm
45Finishing wall with two coat of Distemper coat /equivalent make exterior paint over a priming coat of water proofing cement paint on approved quality such as super snocem, durocem, super quality of approved shade on undecorated wall surface with surface prepared with white Birla / equavalent putty of approved make to give an even shade after throughly brushing the surface to remove all dirt and remain of loose powdered material and rate is inclusive of cost of all material, labour T&P and curing etc. complete as per direction of E/I.
46Supply and fixing of 30mm thick flush door shutters including fixing of wooden cleats & stoppers and including supply and fixing and adjustment of hinges, oxidized iron fittings as sliding/tower bolts, locks, handles, springs fitting with necessary screws exclusive of cost of door fittings. ( sample will be approved by E/I.)
47Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35*35*5mm joints mitred and welded by angle sections of size 35x35x5mm or 35x5 mm flat pieces to the existing T-iron frame or to the wall with dash fastenar including fixing of necessary butt hinges and screw and applying a priming coat of approved steel primer all complete as per the direction of E/I.
48Making plinth protection 50mm thick of cement concrete 1:3:6( 1 cement : 3 coarse sand : 6graded stone aggregate 20mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation, levelling and dressing and finishing the tao smooth.
49Supply and fixing of 3.5 mm to 4.70 mm thick glass pans (saint Gobian, Modi Guard, IAG etc) ISI marked quality as approved by E/I. The rates included cost of necessary wooden bidding (teak wood) nail and spring or putty for fixing including supply of all material, labour T&P etc. complete. DSR 10.30
50Fixing of steel/ wooden door & chaukhats in proper position at labour rate only Above 1.50 sqm
51Fixing of steel/ wooden door & chaukhats in proper position at labour rate only below 1.50 sqm
52Supply & fixing of hexagonal fan box with hexagonal side of approximate in 80 mm in length fabricated from 16 SWG MS sheet in corporating 10 mm dia M.S. round bar duly bend for supporing fan hangers duly painted red oxide and screwing arrangement with wiring conduit laid in RCC roof before concreting along with supply of all material labour T&P etc. required for proper completion of the work. SOR elec 1149
53Providing and fixing of 15 mm dia B class CPVC Pipe concealed in wall and floor (Approved Make by E/I)) with CPVC fittings (band, socket, elbow, Tee, long screw, nipple etc ISI marked and clamps including making good the damage in wall ceiling and floor including supply of all material, labour & T&P etc Complete as per directions of E/I
54Providing and fixing of 20mm dia B class CPVC Pipe concealed in wall and floor (Approved Make by E/I)) with CPVC fittings (band, socket, elbow, Tee, long screw, nipple etc ISI marked and clamps including making good the damage in wall ceiling and floor including supply of all material, labour & T&P etc Complete as per directions of E/I
55Providing and fixing of 32 mm dia B class CPVC Pipe concealed in wall and floor (Approved Make by E/I)) with CPVC fittings (band, socket, elbow, Tee, long screw, nipple etc ISI marked and clamps including making good the damage in wall ceiling and floor including supply of all material, labour & T&P etc Complete as per directions of E/I
56Making water connection of 32mm dia from exisiting PVC/DI Pipe line 100mm to 300mm dia running main including MS Clamp with nut bolt and rubber packing with MTA with brass insert and CPVC elbow and socket including cost of all material labour T &P and also including excavation of earth making pits and bailing out water and also refling pits as per direction of E/I.
57Supply and fixing of PVC SWR ring fit (as per IS 13592 with latest amedments) type-A) phenolex prince suprime make soil waste and vent pipe dia 110 mm (OD) complete with all necessary fittings such as band, collor, socket, elbow Tee etc) complete for proper completion of the work as per direction of the E/I.
58Supply and fixing of PVC SWR ring fit (as per IS 13592 with latest amedments type-A) phenolex prince suprime make soil waste and vent pipe dia 75 mm (OD) complete with all necessary fittings such as band, collor, socket, elbow Tee etc) complete for proper completion of the work as per direction of the E/I.
59Supply and fixing of SWR phenolex prince suprime make nahani trap 100 mm x 75 mm embeded in cement oncrete 1:2:4 (1 cement : 2 coarse sand : 4 stone grit 20 mm size) including supply of allmaterial, labour T&P etc. complete as per direction of E/I.
60Supply and fixing of ISI mark parrywater/Jonshon/Cerra make Orrisa pattern WC pan size 580x440 mm of approved quality including 10 lit. capacity low level PVC Cistern with all accessories. The rate is inclusive of supply and fixing of WC pan-1 no, low level cistern PVC 10 lit capacity-1 No, SWR P-trap-1 No, Flush pipe 30 mm dia PVC (of approved make- 1 No,) PVC connection of heavy duty (appropriate length) and fixing is to done in cement concrete 1:2:4 (1 cement, 2 coarse sand :4 stone grit 20 mm size) along with all other consumables necessary for fixing etc. complete required for proper completion of the work as per direction of E/I. DSR 17.1
61Proding and fixing range of three white vitreous china flat back half stall urinal of size 580x380x350mm with 10 Ltr white PVC automatic flushing cistern with fittings standerd size C.P. brass flush pipe, spreders with unions and clamps (all in CP brass) with waste fittings as per IS 2556, CI trap with outlet grating and other coupling in CP brass, including painting of fittings and cuttings and making good the walls and floors wherever required.
62Providing and fixing of white vitreous china wash basin size 630x450mm with a single 15mm C.P. brass piller taps 32mm C.P. brass waste of standerd pattern, including painting of fittings and brackets, cutting and making good the wall wherever required complete all as direction of E/I.
63Providing and fixing of CP BRASS waste jali dia 125 mm as per directions of E/I
64Supplying and fixing of 20 mm dia Heavy Duty Gate Valve I.S.I. marked as per directions of E/I
65Supplying and fixing of 32 mm dia Heavy Duty Gate Valve I.S.I. marked as per directions of E/I
66Supplying and fixing PVC connection pipe of heavy duty (appropriate length)
67Supplying and fixing PVC float valve with Brass rod as per direction of E/I.
68Supplying and fixing of CP Brass Bib Cock ( 15 mm dia ) Heavy Duty Long body of approved make as per directions of E/I
69Supplying and fixing of CP Brass Bib Cock ( 15 mm dia ) Heavy Duty short body of approved make as per directions of E/I
70Supplying and fixing of CP angle valve (15mm dia) heavy duty of approved make as per directions of E/I
71Providing and fixing 600x400mm beveled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
72Making House connecting chamber size 900mm x900 mm x1000 mm with class 150 B/W in 1:6 cement and coarse sandmorter base concrete 1:6:12 (1 cement : 6 coarse sand : 12 Brick ballast 40 mm size) plaster in 1:3 cement and coarse sand morter with neat finished and cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone grit 20 mm size in floor and cunet including 100mm thick RCC cover including cost of all material, labour T&P etc required for proper completion of the work.
73Making sewer connection of sewer line with existing manhole including breaking into & making good the wall all material T&P with cutting and repair of manhole as per direction of E/I.
74Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
75Wiring point for light 1.5 Sqmm FR PVC insulated multistrand single core copper conductor cable in PVC Condult pipe party concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 Sqmm. FRLSH PVC insulted multistrand copper conductor cable as earth wire plano type switch and celling rose/angle/batten holder on 3mm thick phenolic laminated backelite sheet etc complete in all respect as directed including matching colour wash. (UP PWD SOR-2018 SI. No. 138C
76Wiring point for Fan/fresh air fan (light duty exhaust fan) with 1.5 sqmm FRLSH PVC insulated multistrand single core copper conductor cable in PVC consuit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 Sqmm FRLSH PVC insulted multistrand copper consductor cable as earth wire plano type switch and ceiling rose on 3mm thick phenolic laminated backelite sheet etc complete in all respect including matching colour wash. (UP PWD SOR-2018 SI.NO. 140C)
77Wiring point for plug with 1.5 Sqmm FRLSH PVC insulated multistrand single core copper conductor cable in PVC condult pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 Sqmm FRLSH PVC insulted multistrand copper conductor cable as earth wire drawn inside the conduit and piano type switch and socket etc. complete in all respect including matching colour wash. (UP PWD SOR-2018 SI. No. 141c).
78Supply and fixing of power plug with 15A/250 volt Flush type switch and 5 pin 15A/250V fliush type universal socket in suitable M.S. box of 175mmx100mmx50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. UPPWD SOR-2018 SI. No. 1139.
79Supply & wiring of submain with two no 2.50 sqmm FRLSH PVC insulated 1100v grade multistrand single core copper conductor as earth continuity wire including matching colour was etc. complete in all respect (UP PWD SOR-2018 SI. No. 1304C)
80Supply & wiring of submain with two no 4.0 sqmm FRLSH PVC INSULATED 1100V grade multistrand single core copper conductor cable in 20mm dia heavyduty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting with one no 2.5 sqmm FRLSH PVC insulated 1100V grade multistrand single core copper consductor as earth continuity wire drawn in conduit including matching colour wash etc. complete in all respect (UP PWD SOR-2018 SI. No. 221 C)
81Supply & wiring of submain with two no 6.0 sqmm FRLSH PVC INSULATED 1100V grade multistrand single core copper conductor cable in 20mm dia heavyduty (2 mm thick) PVC conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting with one no 4.00 sqmm FRLSH PVC insulated 1100V grade multistrand single core copper consductor as earth continuity wire drawn in conduit including matching colour wash etc. complete in all respect (UP PWD SOR-2018 SI. No. 222 C)
82S/F of Fan box cover of 3mm thick bakelight sheet of hexagonal/round shape on existing fan box complete in all respect direction of E/I (M/R)
83S/F round bakelite AI/PVC Junction Box cover on existing junction Box complete in all respect as per direction of E/I (M/R)
84Supply and Burring of 600mmX600mmX6mm G.I. plate vertically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia GI pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30 cm square CI frame with hinged cover masonary housing alternate layers of charcoal/coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge compete in all respect.
85S/F of electronic fan regulator 120-280V ISI marked, on the existing switch board including making connections, required material, labour T & P etc. for proper completion of work to the satisfaction of Engineer in charge of work.
86S/F of two number 8 SWG GI wire in 15mm dia. GI Pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P and other material required for proper completion of the work as directed at site.
87S/F surface/flush mounting 8 ways SPN distribution board without additional metal door with 4 Nos. 6A to 32A MCB and 1 No. 40A DP Isolator complete in all respect as directed by Engineer incharge. SI. No. 1002. 1005A, 1024 CAT B
88S/F surface/flush mounting 4 ways SPN distribution board without additional metal door with 1 Nos. 6A to 32A MCB and 1 No. 40A DP Isolator complete in all respect as directed by Engineer incharge. SI. No. 1002. 1005A, 1022 CAT B
89Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm)
90Supply and fixing of LED Tube Light with batten suitable for up to 1x22 watt LED Tube Light fittings including tube on surface complete in all respect. CAT-AAA Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58416287
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 1.41 Crore
LAST DATE 02-12-2026
Authority
Authority Name Uttar Pradesh Housing And Development Board
Work Description Tender for Development/Construction Of Pond Retaining Wall, Walking Path , Reinforced Cement Concrete Drain , Guard Room And Toilet Block At Sector - 7A, Avadh Vihar Yojana, Lucknow.
Basic Detail
Tender No 3126/Y-12/180 Date-30.10.2026
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 06 Nov 2026
Submission Date 02 Dec 2026
Open Date 03 Dec 2026
Finance
Tender Value 1.41 Crore
Tender Fee 5310
EMD 2.85 Lakhs
Exemption Available
Document List
240da823-d4e2-4c75-8302-02ea3de17909.html
BOQ_2286402.xls
PondFinancialBidCDL7.pdf
PondTechnicalBidCDL7.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

240da823-d4e2-4c75-8302-02ea3de17909.html

xls

BOQ_2286402.xls

pdf

PondFinancialBidCDL7.pdf

pdf

PondTechnicalBidCDL7.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender