Tender For Replacement Of Damaged Doors And Allied Civil Works In Various Houses(H.No.46 & 153 Type-I, H.No.35-B Type-Ii, H.No.3 Type-11A, H.No.28 & 30 Type-13D, H.No.16 Type-13Je),Sector-12,Pgimer,Chandigarh
Tender Value
1.94 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
8 days left
EMD
3880
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Damaged Doors And Allied Civil Works In Various Houses(H.No.46 & 153 Type-I, H.No.35-B Type-Ii, H.No.3 Type-11A, H.No.28 & 30 Type-13D, H.No.16 Type-13Je),Sector-12,Pgimer,Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : |
| 4 | W.C. pan with ISI marked white solid plastic seat and lid |
| 5 | Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with sealing conforming to IS : 5382, leaving 10 mm gap for thermal expansion, |
| 6 | 110 mm diameter |
| 7 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 8 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 9 | Bend 87.5° |
| 10 | 110 mm diameter |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 12 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 13 | item of wire gauge and flush door |
| 14 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge |
| 15 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 16 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : |
| 17 | 35 mm thick shutters |
| 18 | with ISI marked M.S. pressed butt hinges bright finished of required size |
| 19 | Kiln seasoned and chemically treated Hollock wood |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 21 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 22 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 23 | of area 3 sqm and below |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. |
| 25 | 15 mm nominal dia Pipes |
| 26 | Providing and fixing 30 mm thick factory made internal PVC prelaminated flush door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20 mm x 40 mm for styles as well as top, bottom & lock rail. M.S. frame shall have a coat of steel primers of approved make and manufacture. The inside panel shall consist of 20 mm thick multi chamber hollow PVC section of 1 mm wall thickness bonded using solvent cement / Cynoacrylate adhesive with 5 mm thick (±0.5 mm ) plain PVC sheet of density 600 kg / cum manufactured by an ISO 9000 certified company, on both side of inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet batten (made by sticking 2 nos. rigid foam PVC sheet of 5 mm (±0.5 mm ) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain moulded PVC sheet of door 20 mm thick (5mm x 4 nos.) PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. S.S. butt hinges of size 100 x 25 x 2 mm & 50 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube. Other hardware should be fixed by 25 x 8 mm size steel screws etc. complete in all respect as per direction of Engineer Incharge. |
| 27 | Type-2 28A,13JE,14,13JE-16 |
| 28 | Providing and fixing factory made P.V.C. prelaminated door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 29 | Amount After GST Correction Factor on DSR 2023 @ 0.973 (by Subtracting @ 0.027 from the total amount of Sr. No. 1 to 13 ) , Sub Total |
| 30 | Add water charges @0.5% |
| 31 | Credit of old material |
| 32 | Old dismantled door with frame complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender