Tender For Balance Work Of Primary Health Centre Building Level-I With Residence At Bara In Tehsil Chachiot, Distt. Mandi (H.P.) (Sh:- Reconstruction Of Formation Cutting At Various Rds In Km 0/000 To 0/100, Construction Of Retaining Wall, Breast Wal
Tender Value
32.99 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
2 days left
EMD
66000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work Of Primary Health Centre Building Level-I With Residence At Bara In Tehsil Chachiot, Distt. Mandi (H.P.) (Sh:- Reconstruction Of Formation Cutting At Various Rds In Km 0/000 To 0/100, Construction Of Retaining Wall, Breast Wall, Providing And Laying Interlock Tiles & Main Gate Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in soil in hill area in all heights and depths in all kinds of soil excluding saturated soil comprising of pick, jumper blasting work both in soft and hard rock with chiseling / wedging out side of rock ( where blasting is prohibited ) and their intermediate classification of soil excluding dewatering where required settingout to the required line grades , side slopes triming bottom and level as shown on drawings as directed by the Enginner -in charge at site according to technical clause 1603.1 and 1603.2 sorting useful / un-useful materials and stacking the same in all leads and lifts and transportation of the un-useful materials for filling in roads ways , embankments for grades improvements and leveling to the require grade and then disposing of surplus excavated earth in acquired width of road or on approved dumping sites through all modes of trasportation excluding head load animal load or machnical means alongwith its leveling fine dressing and all labour, machinaries , materials , tools equipments and sefety measures and incidentals necesary to complete the work by all means ( if any required ) recovary for 39.83 cubic mete @ Rs. 300/- per cubic metre amount 11950/-only shall be done on prorata basis for the quantity of cutting in earth work effected . Any loss to the public and private property during the course of excution shall be the absolute responsibility of the contrator , which shall have to be duly compensated by him in all respect excluding all leada and lifts and materials and as per direction of Enginer in charge . |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm (thirty centimetre) in depth, 1.5 m (one point five metre) in width as well as 10 sqm (ten squaremetre) on plan including getting out and disposal of excavated earth upto any lead , as directed by Engineer-in-charge Ordinary rock including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to any level : 1:4:8 (one Cement : four coarse sand : eight graded stone aggregate 40 mm fourty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 4 | Back filling behind abutment, wing wall and return wall complete as per drawing and technical specification clause 1204.3.8 granular material including carriage of material within all leads and lifts and other incidental and as per the direction of the Engineer-in-Charge. |
| 5 | Providing weep hole in brick masonry/stone masonry/plain reinforced concrete abutment wing wall return wall with 100 mm (one hundred millimetre) dia PVC pipe extended through the full width of the structures with slope of 1 (v) :20 (H) towards drawing face complete as per drawing and technical specification clause 614,709& 1204.3.7 within all leads and lifts and other incidental and as per the direction of the Engineer-in-Charge. |
| 6 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, kg railings, brackets, gates and similar works including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 7 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm (one point sixty six millimetre to two millimetre) thick in eaves board/facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . (Base members of steel work shall be measured & paid separtely) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 8 | Providing and fixing valley 60 cm (sixty centimetre) overall 0.60mm (zero point six ziro) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture of required colour on steel work to give an even shade one or more coats including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 10 | Boulder filling under floors tightly hand packed including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level : 1:3:6 (one Cement : three coarse sand : six graded stone aggregate 40 mm (forurty mullimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 12 | Providing and laying 60mm (sixty millimetre) thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty millimetre) thick compacted bed of coarse sand, filling the joints with line sand etc. all complete including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 13 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc complete 150 mm (one hundred fifty millimetre) nominal size including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . Lintels, beams, plinth beams, girders, sqm bressumers and cantilevers including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 15 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . II ) All works above plinth level upto Floor -V level. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . |
| 16 | Providing and laying Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender