Water Resources and Irrigation Government Departments Closing in 5 days TDR #58415261

Tender For Installation And Energisation Of Jagannathpur-Ii T.W.P Under Nuagaon Block In Nayagarh District Under Bkvy-Ridf 2026-27

Issued by Government Departments · Nayagarh, Odisha
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
19938
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Nayagarh → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Installation And Energisation Of Jagannathpur-Ii T.W.P Under Nuagaon Block In Nayagarh District Under Bkvy-Ridf 2026-27

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 10-Nov-2026 Tender Notice Other 26-Nov-2026

BOQ

Name of Work:- INSTALLATION AND ENERGISATION OF JAGANNATHPUR-II T.W.P UNDER NUAGAON BLOCK IN NAYAGARH DISTRICT UNDER BKVY-RIDF 2026-27
Sl. No. Item Description
1Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. For Drilling of 200 (8”) dia pipe From 0 mtr. to 100th meters
2Supply of all Labour & T&P for lowering the following sizes of PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia PVC/GI Casing pipes
3Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge minimum 6hours is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-incharge.
4Supplying all materials,Labour T & P for packing the bore with washed gravel size (P-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction Engineer-in-charge.
5Cost for slotting charges of 200 mm dia Schedule 80 PVC casing pipe having slot size 1.5 mm including all cost etc complete.
6Threading charges 200mm dia Schedule 80 PVC casing pipe
7200mm dia 300mm long PVC short piece
8200mm PVC Cone (WP 10 Kg/cm2)
98\\" PVC threaded end cap PN-10
10200mm Ø SCHEDULE 80 casing pipe (As per EPM Rate order no.1814 dated 23.04.2025)
11Earth work excavation in foundation in hard soil with 50 mtr initial lead 1.5 m initial lift including rough dressing and breaking clods to 2 cm to 7 cm and laying in layers not exceeding 0.3 m in depth as per direction of Engineer-in-charge
12Earth work in hard soil such as hard stiff clay,stiff black cotton, hard red earth, sheles, morrum,.ordinry gravelly within 50 meter initial lead and 1.5mt. Intial lift including rough dressing and breaking the clods and stacking rubble or spreading and levelling within the site as the case may be etc complete as per the direction of the department. Average Rate of Mannual & Machinery (60% mechanical + 40% mannual)
13Filling foundation and plinth with sand watered and rammed as per direction of Engineer-in-charge.
14Cement concrete (1:4:8) with 4 cm size h.g metal as per direction of engineer-in-charge.
15Brick work with Fly ash Brick (25cmx12cm x8 cm) having crushing strength not less than 35kg/cm with dimensional tolerance ± 5% in cement mortar (1:6) in foundation and plinth.
16Brick work with Fly ash Brick (25cmx12cm x8 cm) having crushing strength not less than 35kg/cm with dimensional tolerance ± 5% in cement mortar (1:6) in super structure.
1712mm thick cement plaster (1:6 ) over brick masonary
18Cement Concrete (1:2:4) with 12 mm size HG chips for R.C.C Works.
19Supplying, fitting and placing oncoated HYSD (TISCON) bar reinforcement complete as per drawing and technical specification including cutting, binding, bending and cost of binding wire.
20Rigid and smooth centering and shuttering for RCC work including false work and dismentalling them after casting including cost of materials complete. in foundation ( Plinth Bend )
21Lintel
22Roof Slab & Chajja
23Rcc Wall
24Filling F & P with excavated materials, moorum including watering and ramming as directed by the engineer-in-charge
25Filling in F&P with excavated materials by means of Mechanical 60% & mannually 40% i.e. of respective item No. 1 above)
26White washing 3 Coat.
27Colouring,washing with materials (2 coats)
28Priming 1 coat with any appproved Primer including cost of materials
29Painting two coats with any approved paints
302.5 cm thick A.S flooring with CC (1:2:4) including punning.
31Cement washing one coat
32Cost of Pump chamber wiring with all costs
33Supply of M.S Door with door frame grill & Window with cost of priming, painting and fixing etc. In complete shape
34Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge.
35160mm Ø HDPE Pipe PE 80- PN 4
36Transportation of 160 mm dia HDPE pipe from nearest approved manufacturing units as listed in EPM rate contract to village site of the project
37Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge
38Cost of 5 HP S/S Pumpset having discharge of 700LPM at 25 meter head including testing.
39Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 6.00 to 9.50 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt meter,Ameter,MCB in complete shape including Indicator Lamp
403 KVR Capacitor
413 x 10 sqm Tarpodar Cable XLPE (Cross like polythylin) confirming to IS-7098 (Part-II) including laying below 9 mtr of the ground & fitting the excavated materials including watering & ramming.
426 mm2 submerssible (3 Coper) Flat Cable
4363/100 AMP 415 volt T.P. main switch confirming to IS 4064 (Pt-I & Pt-II) with utilisation category Ac-22.
44Supply, fittintg and placing of 80 mmdia Nominal Bore GI pipes having wall thickness 4.5 mm electrical resistance welded of medimum class confirming to IS-1239 (part-I/2004) with latest amendments, screwed at both ends as per IS-554 socketed at 1 end and other end protected with plastic threaded protector. The socket confirming IS-1239 (Part-II/1992) with latest amendments in rendom length of 4 to 7 mtrs. Each pipe should bear ISI certification and manufacturers name /trade mark.
45Labour charges for Lowering of the pump set,delivery fitting including fitting of sluice valve / NRV / ARV / PVC-Tee / and transportation etc. for two sets
4680 mm dia G.I. bend IS No 1239 (Part-II/1992)
4780 mm dia G.I. flange IS No 6392/1971
48100x80 mm dia G.I. reducing socket
49150 x80 mm dia G.I. reducing socket
50Cost of 200x100 mm Ø M.S. T/W cap
51Cost of 80 mm Ø M.S Clamp
52Cost of 160 mm dia HDPE End Cap
53Cost of 160mmx160mmx160mm dia HDPE equal Tee
54Cost of Nut Bolt.
55Cost of Rubber Insuration.
56Cost of 160mm x160mm x 110 mm GI Tee with accessories
57Cost of 150mm dia Butter fly valve
58Cost of 100mm dia Sluice Valve
5950mm dia C.I. Air Release Valve IS Mark 14845(SI)with 1 mtr long G.I.Short piece with saddle
60Cost of cement primer 1 ltr
61Oil painting with approved colour two coats including cost of paint and labour charges
62Cost of radium paint to be used in lettering 1 ltr
63Cost of extra earthwork for laying of suction pipe in proper slope.
64Photograph of before, during and completion of work.
65Cost & Supply of tool kit (Sly wrench, DE Spanner, Tester,Gloves etc)
66Construction and erection of 11 /0.4 KV , 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning, SITC and Erection of GI fencing/ brick masonary boundary wall 16 running metre with grill gate etc. complete but excluding cost of 6% supervision & inspection chargesas per specification of TPCODL etc complete.
67Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAA Conductor average span 40mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T & C Disc. polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required including cost of all materials, labour, transportation, erection & commissioning, earthing with chamber etc complete.
68LT line 3ph 4w using 3x35+1x25 sq.mm XLPE AB Cable & 9 mtr long PSC poles with fittings with all materials required for the same as per specification & estimate of Discom.
69Electrical T.P. Box including labour chatges for installation and fittings of materials in the sub-station.
70Electrical Earthing with 40mtr dia medium duty GI earthing pipe each 3 m longwith installation including cost of all materials like GI flange chorcoat, salf etc. as required as per I.E Rule
71Other Electrical materials such as pvc tape.7/20pvc copper wire 3/20 pvc copper wire G.I flxible condite pipe no 6 GI wire copper cable socket GI socket and petty materials required for electrical installation. All materials should be as per IS including fitting charges and electrical installation & energisation. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58415261
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 26-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Installation And Energisation Of Jagannathpur-Ii T.W.P Under Nuagaon Block In Nayagarh District Under Bkvy-Ridf 2026-27
Basic Detail
Tender No 02/2026-27/DT.26.10.2026
Bidding Type Tender
Location
City Nayagarh
State Odisha
Key Dates
Publish Date 10 Nov 2026
Submission Date 26 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value Ref. Documents
Tender Fee 7080
EMD 19938
Exemption Available
Document List
15792a3b-d317-4670-8350-c3322adf2192.html
BOQ_618430.xls
DTCN02.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 10, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

15792a3b-d317-4670-8350-c3322adf2192.html

xls

BOQ_618430.xls

pdf

DTCN02.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender