Educational and Research Institute Boards / Undertakings / PSU Closing in 8 days TDR #58415168

Tender For Construction And Repairs To The Existing Compound Wall And Allied Work Near Joshi Gate And West Side Of Savitribai Phule Pune University.

Issued by Boards / Undertakings / PSU · Pune, Maharashtra
Tender Value
2.89 Crore
Estimated cost
Bid Submission
30 Nov 2026
8 days left
EMD
2.90 Lakhs
Bank guarantee accepted
Document Fee
7500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction And Repairs To The Existing Compound Wall And Allied Work Near Joshi Gate And West Side Of Savitribai Phule Pune University.

BOQ

Name of Work:- Construction and Repairs to the Existing Compound Wall and allied work near Joshi gate and West side of Savitribai Phule Pune University.
Sl. No. Item Description
1Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
2Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc
3Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc.
4Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.
5Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts, complete.Spec : As directed by Engineer In Charge
6Removing wire fencing with iron/ C.C. fencing post and stacking the materials as directed with all leads, lifts etc. complete.
7Removing chain link fencing 1.6 M. height and stacking the materials as directed with all leads, lifts etc. complete.
8Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. Spec. No.Bd.A.1 Page No. 259
9Excavation for foundation in soft murum including removing the excavated material upto a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means. Spec. No.Bd.A.2 Page No.259
10Excavation for foundation in hard murum and boulders including removing the excavated material upto a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means. Spec. No.Bd.A.3 Page No. 259
11Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metrs beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary backfilling with available earth / murum, ramming, watering including shoring and strutting etc.complete. (Lift upto 1.5m.) By Mechanical Means. Spec. No.Bd.A.4 Page No. 259
12Excavation for foundationin Hard rock by chiselling, wedging, linedrilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and backfilling with available earth/murum watering, ramming etc. complete. (Lift upto 1.5m.) By Mechanical Means. Spec. No.Bd.A.6 Page No. 260.
13Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec.No.Bd.A.10 Page No.262.
14Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc.complete.
15Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete
16Providing soling using 80mm size trap metal in 15cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.
17Providing and fabricating structural steelwork in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections without connecting plates, braces etc.and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc.complete.
18Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. Number : As directed by Engineer-in-charge.
19To carry out the bending of various steel components, including joists, channels, angles, tees, rectangular pipes, etc., the process is executed in strict accordance with detailed designs and drawings or as directed by the engineer in charge.
20Providing and fixing 16 mm Sq. rod pointed at the end at distance 200 mm c/c welded on 16 mm sq rod which is embeded in RCC pardi upto 6 inch as per dwg. and design
21Providing and fixing mild steel grill work weighing 15 kg / sqm. for Compound wall as per drawing including fixtures, necessary welding & painting with one coats of anti corrosive paint & two coats of oil painting complete. Spec. No. : Bd.U.1 Page No. 537
22Providing and fixing mild steel grill work weighing 20 kg / sqm. for compound wall as per drawing including fixtures, necessary welding & painting with one coats of anti corrosive paint & two coats of oil painting complete. Spec. No. : Bd.U.1 Page No. 537
23Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S. Angles (50 mm x 50 mm x 6mm) at 2.5 Metres, centre to centre including excavating pits for foundation, fixing post in cement concrete of size 45 x 45 x 45 cm., fastening the wire and painting the M.S. Angles with one coat of red lead primer and two coats of painting etc. complete. Spec. No. : Bd.W.3 Page No. 583
24Providing and fixing mild steel grill gate with frame having weight of gate sqm as per the detailed drawing and design
25Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm 8 gauge thick and fixed 75 mm above Ground level vertical M.S Angle of 40 x 40 x 6 mm size embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c / c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c / c nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm Angles both sides at every corner or bends embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. Additional Item Spec. No. : As directed by Engineer in charge.
26Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm centerto-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre)
27Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm,comprising of nominal 25mm exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenterto-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) 600 mm girth (SurfaceWidth).
28Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc.complete.With fine aggregate (Crushed sand VSI Grade)
29Providing and laying Cast in situ/ ReadyMix cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, form work, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc.complete. The Cement Mortar1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunnybag, plastic, tarpaulinetc. (Wooden centering will not be allowed.), with reversible Drum Typ emixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
30Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/ quartzite/ gneiss metal for R.C.C.work in foundations like raft, strip foundations, grillage and footings of R.C.C.columns and steel stanchions etc.including bailing out water, Steelcentering, formwork, coverblocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structuralsteel) etc. complete, with reversible Drum Type mixer etc.complete.With fine aggregate (Crushed sand VSI Grade)
31Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C.columns as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete, (Excluding reinforcement and structural steel). with reversible Drum Type mixer etc.complete.With fine aggregate (Crushedsand VSI Grade)
32Providing and laying Cast in situ/ Ready Mix cement concrete in M-25of trap/ granite/ quartzite/ gneiss metal for R.C.C.beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc.complete.With fine aggregate(Crushed sand VSI Grade)
33Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C.pardi of 150mm thickness including steel centering, formwork, coverblocks, laying/ pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with reversible Drum Type mixer etc.complete.With fine aggregate (Crushed sand VSI Grade) formwork for pardi is alluform material.
34Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
35Providing and laying Cast in situ/ ReadyMix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centring, formwork, coverblocks, laying/ pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with reversible Drum Type mixer etc. complete. With fine aggregate (Crushed sand VSI Grade)
36Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pilecaps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc.as per detailed designs, drawings and schedules.including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
37Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually,striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.
38Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar1:6 in superstructure including striking joints, raking out joints, watering andscaffolding etc. Complete
39Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mm diameter/ 2hoop iron strips 25mm X1. 6mm placed at every third course,properly bentand bonded at ends scaffolding, racking out joints and watering etc.complete.
40Providing uncoursed rubble masonry of trap/ granite/ quartzite/ gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls/ in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.
41Providing and fixing 25mm thick bituminus pad for expansion joints in retaining wall, compound wall.
42Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.Spec. No.Bd.L.2 Page No.368. (Use Natural sand)
43Providing sandfaced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
44Labour charges for providing groove inexternal plaster having width and spaced as directed by engineer incharge etc. complete.
45Providing patti/ band 75mm wide on plastered surface 12mm to 15mm thick in C.M.1:3 line and level including neat finishing scaffolding curing etc. complete.
46Providing and making Holes (Core cutting ) in RCC chajjas , slab, pardi, beam of dia. 100 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge
47Providing and making Holes (Core cutting ) in U.C.R. wall 100 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge
48Providing and making Holes (Core cutting ) in RCC chajjas ,slab,pardi,beam of dia. 150 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge
49Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete.
50Poviding and laying UPVC 100 mm pipe for passing pipe line
51Providing J.C.B. for cleaning, levelling, digging and miscellanous work etc. complete.
52Dumpper of 5 to 6 Cu.Mt Capacity for debris, rabbit, soil,material shifting and other cleaning,miscellaneous work
53Dumpper of 8 to 9 Cu.Mt Capacity for debris, rabbit, soil,material shifting and other cleaning ,miscellaneous work
54Providing Bobcut for cleaning levelling, digging and miscellionous work etc complete
55Tractor with Trailer
56Mazdoor, Unskilled Heavy Male / Female
57Providing Plumber with tools - Skilled Spec. No: - As directed by Engineer in charge
58Providing welder / driller with tools - Skilled Spec. No: - As directed by Engineer in charge
59Material shifting by truck ( As directed by engineer in charge)
60BASIC TEST OF CEMENT. Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness
61Basic Test Of Aggregate Water absorption, Specific Impact Value, Crushing Value
62Sieve Analysis
63Abrasion Value
64Flankiness Index & Elongation Index
65Soundness
66Bulk Density
67Fine Aggregate Fineness Modulus (Sieve Analysis), Silt & Clay Content
68Chlorite and Sulphate Content
69Silt Factor
70BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).
71CONCRETE Compressive Strength OF C.C. Cube (Set of 3 cubes). Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58415168
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 2.89 Crore
LAST DATE 30-11-2026
Authority
Authority Name University Of Pune
Work Description Tender for Construction And Repairs To The Existing Compound Wall And Allied Work Near Joshi Gate And West Side Of Savitribai Phule Pune University.
Basic Detail
Tender No C.A.No.2026-27/ SPPU/ESTATE/EE/CIVIL/11
Bidding Type Tender
Location
City Pune
State Maharashtra
Key Dates
Publish Date 06 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 2.89 Crore
Tender Fee 7500
EMD 2.90 Lakhs
Exemption Not Available
Document List
25d88762-bfc4-4415-89df-699a5080bb8e.html
BOQ_2308633.xls
T1_SPPUCompound.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

25d88762-bfc4-4415-89df-699a5080bb8e.html

xls

BOQ_2308633.xls

pdf

T1_SPPUCompound.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender