Tender For Provision Of Lighting Arrangements To The Construction Of New Bridge From Varanasi To Kanniyakumari Road (Abandoned Nh-7) (Shu73) At Km 440 / 100 - 441 / 0 Additional Arm (Sellur) Towards Palam Station Road And Km 0/0 - 0/6 Of Madurai To A
Tender Value
1.30 Crore
Estimated cost
Bid Submission
20 Nov 2026
10 days left
EMD
75000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Madurai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Lighting Arrangements To The Construction Of New Bridge From Varanasi To Kanniyakumari Road (Abandoned Nh-7) (Shu73) At Km 440 / 100 - 441 / 0 Additional Arm (Sellur) Towards Palam Station Road And Km 0/0 - 0/6 Of Madurai To Alagar Kovil - Melur Road (Sh 72A) At Goripalayam Junction In Madurai District.
BOQ
| Sl. No. | Item Description |
| 1 | Supply and erection of 8m free standing single arm bracket 8 sided Octogonally continuously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification.Bottom Pole Dia - 130mmTop Pole Dia - 70 mmThickness of Pole - 3mmThe pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron. The octagonal pole shall be erected with bridge wall PCD adaptor in cantilever assembly with 250mmX250mmX16mm GI Plates with centre hole of bottom pole dia (130mm) surrounded with four hole arrangement with 8mm thick stiffener GI plate, 4Nos. M24 X 150mm bolt with nut & washer. |
| 2 | Supply and fixing of 1No 150W LED street light luminaire (Higher End) with hot dip galvanised single arm bracket of suitable length with suitable bolt and nuts with 1.5sqmm PVC insulated SC unsheathed FRLS copper wire of 24 mtr length from junction box to the fitting. The integrated junction box with pole should be provided with 1No. 4way terminal block with Hylum sheet and 1No 6A SP MCB in suitable size door at the bottom with locking arrangements and necessary connection complete. The pole and bracket should withstand wind speed of 180 Km/Hr. All the nut, washer and bolt should be galvanised. Testing and commissioning should be done as directed by the departmental officers. |
| 3 | Supply and erection of 8m free standing double arm bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification.Bottom Pole Dia - 130mmTop Pole Dia - 70 mmThickness of Pole - 3mmThe pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron. The octagonal pole shall be erected with bridge wall PCD adaptor in cantilever assembly with 250mmX250mmX16mm GI Plates with centre hole of bottom pole dia (130mm) surrounded with four hole arrangement with 8mm thick stiffener GI plate, 4Nos. M24 X 150mm bolt with nut & washer. |
| 4 | Supply and fixing of 2Nos 150W LED street light luminaire (Higher End) with hot dip galvanised double arm bracket of suitable length with suitable bolt and nuts with 1.5 sqmm PVC insulated SC unsheathed FRLS copper wire of 48 mtr length from junction box to the fitting. The integrated junction box with pole should be provided with 1No. 4way terminal block with Hylum sheet and 2Nos 6A SP MCB in suitable size door at the bottom with locking arrangements and necessary connection complete. The pole and bracket should withstand wind speed of 180 Km/Hr. All the nut, washer and bolt should be galvanised. Testing and commissioning should be done as directed by the departmental officers. |
| 5 | Supply and Erection of 8m Free Standing Double Arm Bracket8 sided Octogonally continously tapered structured polewith base plate of size 300 x 300 x 12mm as per IS-875with following specification.Bottom Pole Dia - 130mm, Top Pole Dia - 70 mm, Thickness of Pole - 3 mm. The pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron.The galvanised single arm mounting bracket should be 1800mm length suitable for 70mm top. The pole base plate to be mounted on suitable foundation bolts of 4Nos J type M16x450mm including concreting with constructionof Masonary pedestal with suitable door opening on |
| 6 | the pole to house 6A SP controling MCB ,4way terminal block SMC box etc. with lock and key arrangements and with supply and fixing of 2 No 150W LED street light fitting of high lumens per wattage (Make:Philips/Crompton/Eq) complete with necessary clamps with necessary cowl arrangements on the above post with PVC unsheathed leads from MCB control to the fitting terminal. |
| 7 | This work also includes,1.Providing centring work for 1.50 Sq.m for for plane/vertical column, bed block etc,2. Providing necessary concreting & masonry work to erect the pole3.Providing and laying in position of 0.14Sqm standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for for all RCC items of work including fine curing. The pole and bracket should withstand wind speed of 180 Km/Hr. All the nut, washer and bolt should be galvanised. Testing and commissioning should be done as directed by the departmental officers. |
| 8 | Supply and fixing of 120W LED Flood light Luminaire with integrated driver (Higher end) with SMC Junction box to house 1No. of 6A SP MCB and 4 way terminal block with PVC unsheathed FRLS Copper leads with necessary connection complete (For under deck lighting). |
| 9 | Supply and fixing of 150W LED street light fitting with LED (Higher end) with 40mm dia. GI pipe (class B) with 1 no.40 mm dia GI bend complete on the existing post/ on wall with 1.5 sq.mm PVC unsheathed FRLS copper leads with MS clamps and with painting with SMC Junction box to house 1No. of 6A SP MCB and 4 way terminal block with PVC unsheathed FRLS Copper leads with necessary connection complete. |
| 10 | Supply and clarnping of 4x16sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. |
| 11 | Supply and clamping of 4x16 sq.mm PVC armoured LTUG Alu. cable through HDPE pipe on wall / post with MS clamps. |
| 12 | Supply and fixing of post top for compound with 60W LED Gate light fitting (Crompton make LPTO-60-WW-M / Eq) with Pressure die cast aluminium housing with IP65 protection with suitable dia GI pipe (Class 'B') complete on the post / wall with SMC Junction box to house 1No. of 6A SP MCB and 4 way terminal block with PVC unsheathed Copper leads and aluminium painting. |
| 13 | Supply and providing cable end termination of 4 x 16 sqmm PVC LTUG armoured Al cable with necessary Al cable sockets by crimping etc. with electrical connection complete. |
| 14 | Supply and fixing of brass cable gland suitable for 4x16 sq.mm PVC LTUG armored Alu. cable with earth connection. |
| 15 | Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains. |
| 16 | Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains. |
| 17 | Supply and Laying of 2 x16sq.mm PVC armoured LTUG cable through suitable size GI pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 18 | Supply and fixing of brass cable gland for 2 x 16 sq.mm. PVC armoured LTUG cable with earth connection. |
| 19 | Supply and run of 4 of 25 Sq.mm PVC insulated SC unsheathed FRLS Copper Conductor of 1100V on 7/20 GI bearer wire for service connection mains. |
| 20 | Supply and run of 4 of 25 Sq.mm PVC insulated SC unsheathed FRLS Copper Conductor of 1100V grade in 50mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains. |
| 21 | Supply and fixing of fabricated street light control panel of size not less than 3' x 3' x 1.5' made out of 16SWG CRCA sheet steel with lock and key arrangements painted with spray painting of 2 coats of red oxide and enamel paint with necessary superscribing & danger sign to be mounted on a suitable concreting pedestal with necesary supports with following provisions :1) Supply and fixing of digital weekly programmable timer switch with shortest switching time of 1 minute to turn on /off the lights.2) Supply and fixing of 100A Four pole contactor |
| 22 | 3) Supply and fixing of Vertical type 8 way triple pole neutral MCB distribution board in sheet steel enclosure double door type (Metal) with IP42 protection with 1 no. 100A 4 pole MCB as incoming,2Nos 32A 3pole MCB & 6Nos 63A TP MCB as outgoing with earth connection complete.The MCB DB and MCB's should be Higher End only. |
| 23 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7 / 20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection.(High mast) |
| 24 | Supply and fixing of 32A aerial fuse unit (500V) on suitable100 x100mm TW concealed box with hylem sheet on the tapping pole with necessary clamps. |
| 25 | Supply and fixing of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 16sqmm PVC insulated copper wire with 1 No 100Amp 30 mA Four Pole RCBO (Higher End) with suitable necessary connection with earth connection complete. |
| 26 | Supply and fixing of 3 Phase 100A aerial fuse unit for 3 Nos 100A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps. |
| 27 | Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. |
| 28 | Earthing as per PWD standard with an earth electrode of 2metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. |
| 29 | Supply and run of 1 of No.8 SWG GI wire for earth connection. |
| 30 | Highmast (16 Metre) with 8 Nos. 150W LED Fitting. |
| 31 | Design, supply, erection, testing and handing over of High Mast Structure (Bajaj/ Philips/ make / Eq) with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. of flood light luminaries with control gear box complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast. |
| 32 | a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre Width x 1 metre Length and 2 metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site - 1 set.b) High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch - 1 Set |
| 33 | c) Feeder pillar box comprising 0.90 m x 0.45m x 1,20m floor AI frame with 63A TPN main switch 1 no , 63A fuse unit 3nos., 63A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor - 1 Set. d) Neon aviation obstruction light (Bajaj BJAOL (2) - 1 No.e) 2 Nos of special GI earth electrodes with copper plate 300 x300 x 3mm and copper flat (1”x1/4”) interconnection as per ISS complete with earth connection - 1 set. f) Hot dip galvanized lightening arrestor -1No.g) Flood light luminaries of specially Heavy type water poof Dust proof integral luminaries fitting provided with 150 Watts LED Light fitting( Crompton / Philips make /Eq) with 150W LED Bulb with drives, Alglas coated reflectors, with cable connection etc: complete as per standard specification. - 8Nos. |
| 34 | Supply and fixing 4Mtr heavy duty decorative garden lighting pole (Luker/Eq) to house post-top lantern of 40W LED fitting (Lukar Make ZEUS LPL430 / Eq) mounted on suitable concrete foundation with necessary bolts and nuts and Supply and fixing of 1no of 6A SP MCB ,4way terminal block with SMC box with PVC unsheathed copper leads from the terminals to the fitting. |
| 35 | Hire and running charges for light crane (H-0113). |
| 36 | GST 18 % Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender