Tender For Improvement Of Lighting And Illumination Of Ganvi Power House Stage-I Building Under Ganvi Power House Division, Hpsebl, Jeori.
Tender Value
25.54 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
5 days left
EMD
25548
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Lighting And Illumination Of Ganvi Power House Stage-I Building Under Ganvi Power House Division, Hpsebl, Jeori.
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for circuit/ submain wiring along with earth wire size of 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 2 | Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 3 | Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 4 | Supplying and fixing of 40 Amp, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 5 | Supplying and fixing of 63 Amp, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 6 | Providing, Installation, testing and commissioning of pre-wired, LED Weatherproof Batten (Pure white), 40W, 1200 mm, minimum 4500 lm, IP65, IK07/IK08, minimum 50000 hrs lumen maintenance free, PF ≥0.95, internal surge protection ≥4kV, 4000K/6500K suitable for 140-270 V AC, polycarbonate weatherproof housing complete with mounting accessories directly on ceiling/wall, including connections with 16/0.20 mm twin twisted flexible, cotton braided, copper cable and earthing etc. as required:- Philips/Signify, Wipro, Havells, Crompton, Bajaj, Panasonic or equivalent approved make. |
| 7 | Providing, supplying, fixing, testing and commissioning of 600 mm × 600 mm (2 ft × 2 ft) LED Panel Light, industrial heavy-duty type, suitable for recessed/surface mounting, complete with high-efficiency LED module and integral isolated LED driver, suitable for operation on 230 V AC, 50 Hz supply, rated power approximately 40–42 W, having minimum system luminous flux of 4,000 lumens and system luminous efficacy not less than 100 lm/W, colour temperature 5700 K, CRI ≥80, power factor ≥0.95, THD <10%, LED life ≥50,000 hours (L70), IP65 protected, IK05 or better, housing of CRCA/powder-coated metal or equivalent corrosion-resistant construction, with high-quality opal polycarbonate diffuser for uniform and glare-controlled illumination, with suitable surge protection, complete with all accessories for fixing, connection, testing and commissioning, conforming to applicable BIS/IS standards, complete as required and as directed by Engineer-in-Charge. Make: Philips/Signify, Havells, Panasonic, Crompton, Bajaj or equivalent approved make. |
| 8 | Supplying and erection of Double Pole 63 amps. rating, CAT-A, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single Pole Cat-A in the existing MCB DB complete with connections etc. as required:- |
| 9 | Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Double Pole Cat-A 63 Amp in the existing MCB DB complete with connections etc. as required:- |
| 10 | Providing, supplying, fixing, testing and commissioning of 100 Watt LED Industrial Flood Light (Pure White), heavy-duty outdoor type, complete with high-efficiency LED module and in-built industrial-grade LED driver, suitable for 230 V AC, 50 Hz supply, having luminous flux ≥10,000 lumens and system luminous efficacy ≥100 lm/W, CCT 5700–6500 K, power factor ≥0.95, THD <10%, pressure die-cast aluminium housing with corrosion-resistant powder coating, IP66 protection, minimum 5 kV surge protection, suitable thermal management, LED life ≥50,000 hours (L70), complete with heavy-duty adjustable mounting bracket and all necessary accessories for fixing, connection, testing and commissioning, conforming to applicable BIS/IS standards, complete as required and as directed by Engineer-in-Charge. Make: Philips/Signify, Wipro, Havells, Crompton, Bajaj, Panasonic or equivalent approved make. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender