Tender For special Repair To Water Supply Distribution System At Various Md Accn Under Ge (Central) Banglore
Tender Value
47.29 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
7 days left
EMD
95000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Water Supply Distribution System At Various Md Accn Under Ge (Central) Banglore
BOQ
| Sl. No. | Item Description |
| 1 | S&F in replacement for Cl sluice valve, non-rising type conforming to IS-14846, sutiable for 150 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.6 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed. |
| 2 | All as per No 1.00 above but 100 mm dia complete all as specified and directed. |
| 3 | M&L for DI pipe special IS : 1536 / IS : 1537 – DI fittings and specials of class 'K7' like tee's bend sockets, collar's of junctioning coupling etc of any type(flanged or socket/spigot type )all as specified or new position with the help of connecting pieces for sizes upto 200 mm dia DI pipe line complete all as specified and directed. |
| 4 | Supply, laying, jointing, testing and commissioning in replacement of old CI line to centrifugally cast ductile iron pressure pipes flanged or socket/spigot type, Class K7, complete with all jointing materials, fittings, specials, testing and incidental works, for potable water distribution systems, IS : 8329 – Ductile iron pressure pipes, ISO 2531 / EN 545 – DI pipes for water pipelines, Internal Lining- Cement mortar lining conforming to ISO 4179, applied centrifugally. Lining shall be smooth, dense and uniform, suitable for potable water. External Coating- Metallic zinc coating of minimum 130 g/m², followed by a finishing layer of bituminous paint / epoxy coating, as per ISO 8179.Coating shall be continuous, well bonded and free from damage, strictly conform to IS : 8329 / ISO 2531 for Class K7 pipes ,100 mm (4”) dia ISI marked suitable for tighten joint in any length laid in trenches complete all as specified and directed by Engr-in-Charge. |
| 5 | Supply, laying, jointing, testing and commissioning in replacement of old CI line to centrifugally cast ductile iron pressure pipes flanged or socket/spigot type, Class K7, complete with all jointing materials, fittings, specials, testing and incidental works, for potable water distribution systems, IS : 8329 – Ductile iron pressure pipes, ISO 2531 / EN 545 – DI pipes for water pipelines, Internal Lining- Cement mortar lining conforming to ISO 4179, applied centrifugally. Lining shall be smooth, dense and uniform, suitable for potable water. External Coating- Metallic zinc coating of minimum 130 g/m², followed by a finishing layer of bituminous paint / epoxy coating, as per ISO 8179.Coating shall be continuous, well bonded and free from damage, strictly conform to IS : 8329 / ISO 2531 for Class K7 pipes ,150 mm (6”) dia ISI marked suitable for tighten joint in any length laid in trenches complete all as specified and directed by Engr-in-Charge. |
| 6 | Supply and laying pipe galvanized, “Medium Grade” of 50 mm (2”) dia including all type fittings fixed on wall, ceiling, floor or laid in trenches complete all as spcified and directed. |
| 7 | Supply and laying pipe galvanized, “Medium Grade” 80 mm (3”) dia including all type fittings fixed on wall, ceiling, floor or laid in trenches complete all as spcified and directed. |
| 8 | S&F in replacement for Gun Metal valve, rising type conforming to IS-14846, sutiable for 50 mm bore pipe consisting of SS spindle as per IS 6603, Cast iron Body, Dome & Wedge as per IS 210, greasy jute type gland packing, fasteners as per IS 1367, Natural rubber gasket, CI manual hand wheel etc complete double end flanged and drilled, of Class PN-1.0 ( ISI marked) including all jointing materials such as rubber gasket insertion sheet nut ,bolts and washers etc complete all as specified and directed. |
| 9 | S&F Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore, Body: Grey cast iron of grade FG-200 / FG-260, robust and pressure tight, Float: Stainless steel corrosion resistant, Orifice & Seat: Gun metal , precision machined, Lever / Spindle: Stainless steel, Fasteners: Stainless steel / galvanized steel, working pressure up to 10 kg/cm² and fixing up in Cast Iron Water supply mains complete all as specifiedand directed. |
| 10 | Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft / loose soil complete all as specified and directed. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm thick in soft/loose soil complete all as specified and as directed. |
| 12 | Removing excvated materials (soils) to distance not exc. 50m and deposited where directed at a level not exc. 1.50m above the starting point complete all as specified and as directed. |
| 13 | Supply, installation, testing and commissioning of 10 HP Non-Clog MonoBlock PUMP SET, 3-phase, 415V, 50 Hz, TEFC induction motor suitable for pumping application, complete with base frame, coupling, vibration pads, terminal box, earthing arrangement and all necessary accessories as required for efficient operation. The motor shall conform to IS:325 / IEC standards, minimum IE3 efficiency class, insulation class ‘F’ with temperature rise limited to class ‘B’. Motor shall be suitable for outdoor use with IP55 protection complete all as specified and directed.Notes :-(a) The scope of work shall include providing and fixing of centrifugal pump with motor mounted on common fabricated steel base frame, flexible coupling with coupling guard, anti-vibration pads, terminal box, foundation bolts, earthing terminals, cable glands, all accessories and fittings necessary for satisfactory operation.(b) Construction of concrete foundation/Base of suitable size and strength as per manufacturer's instructions complete with anchor foundation bolts.(c) Alignment of pump and motor using precision instruments.(d) Mechanical connection of suction and delivery pipelines including necessary flanges, nuts, bolts, gaskets and accessories.(e) Electrical connections from the nearest isolator control panel to the motor including termination, earthing and testing.(e) Filling of lubricant, greasing of bearings and all pre-commissioning checks.(f) Testing, trial run under load, performance verification and commissioning to the entire satisfaction of the Engineer-in-Charge.(g) Submission of manufacturer's test certificates, warranty certificates, operation and maintenance manuals and as-built drawings.(h) The complete installation shall conform to relevant provisions of IS 9079, IS 325, IEC 60034. |
| 14 | Supply, installation, testing and commissioning of automatic chlorination system using Sodium Hypochlorite (NaOCl) for disinfection of water, complete in all respects as per specifications.Electrical:Power Supply: 230V/415V, 50 Hz Standards: Conforming to relevant IS/IEC standardsIS 3025 (Water testing) IS 10500 (Drinking water standards)Automatic operation with timer / PLC based control, Input from flow meter / chlorine analyzer (if applicable)Protection: Overload, short circuit Residual Chlorine Analyzer (Optional but recommended):Range: 0–5 ppm Accuracy: ±0.1 ppm Incl residual chlorine analyzer with sensor, controller, and display,Piping & Valves: Chemical-resistant PVC/UPVC pipingTechnical Specifications:Type of Disinfection: Chemical chlorination using Sodium Hypochlorite solution (5–12% available chlorine) Dosing Type: Automatic / Proportional dosing based on flow / residual chlorineDosing Pump: Type: Diaphragm / Solenoid / Motor driven metering pumpCapacity: Adjustable (e.g., 0–10 LPH or as per design requirement)Pressure Rating: Minimum 5–10 barMaterial: PVDF / PTFE compatible with NaOClChemical Storage Tank: Capacity: 100 Litres (as required) Material: UV-stabilized HDPEFittings: Level indicator, drain valve, vent, Agitator (if required):Type: Slow speed mixer for uniform concentrationDosing Accessories: Injection quill (NRV type)Foot valve with strainer Suction & delivery tubing (PVC/PE)Calibration column |
| 15 | Supply and filling of Sodium Hypochlorite solution (65-70%) of approved make complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender