Tender For Office Space & Storage Space At Third Floor Of special repair Office
Tender Value
80.28 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
22 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Office Space & Storage Space At Third Floor Of special repair Office
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing doors,windows,ventilator including removal of shutters, hinges, holdfasts and all other fittings and stacking materials within CSL premises etc complete. |
| 2 | Dismantling and removing tiles set in cement mortar in floor including cleaning and stacking, serviceable materials and removing the debris within CSL premises etc. complete. |
| 3 | Dismantling flushing cistern, wash basin etc. of all types (CI/PVC/Vitrious China) including stacking of useful items and disposal of unserviceable material within CSL including all labour, other incidentals, hire for tools& plants etc. complete all as per the direction of Engineer-in-charge. |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within CSL including all labour, other incidentals, hire for tools & plants etc. complete all as per the direction of Engineer-in-charge. |
| 5 | Demolishing R.C.C / P.C.C work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within CSL premises as per direction of Engineer-in- Charge, including all labour, other incidentals, hire for tools and plants etc. complete. |
| 6 | Making opening in brick masonry including dismantling in walls by cutting masonry and making good the damages to walls to match existing surface including disposal of the debris within CSL premises, all complete as per direction of Engineer-in-Charge. |
| 7 | Dismantling, removing and lowering wooden frame work, wooden partition, planked sheeting , ceiling planks, AC/GI sheets for roofing, cladding, ceiling, wooden partition stacking serviceable materials & removing the unserviceable material within CSL premises etc. complete. |
| 8 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. |
| 9 | 50 mm average thickness |
| 10 | 25 mm average thickness |
| 11 | Dismantling roofing sheet including ridges, hips, valleys and gutters etc., conveying and stacking the serviceable dismantled materials in civil store, disposal of scrap materials in scrap yard and disposal of other debris inside CSL including all labour, other incidentals, hire for tools & plants etc. complete all as per the direction of Engineer-in-charge. |
| 12 | Disposal of unserviceable materials from site to outside CSL premises (after crushing down the materials) by using Tipper & Hydraulic excavator to Cheriyakadavantra . Rate is inclusive of all operational expenditure, including the operational cost of Hydraulic excavator & Tipper as directed by Engineer-in-charge. |
| 13 | Providing and fixing drywall system which include 12mm thick SuperHD Fiber Cement Board (High pressure steam cured) conforming to IS 14862: Type A - Category IV, as per standard sizes shall be screw fixed to either side of the MS framework (structurals will be measured separately) by staggering the joints of the boards and maintaining a groove of 2- 3mm between the joints of the boards. 50mm thick and 48~50kg/m3 density Rock-wool shall be used as an infill in between the cavity of the drywall held to its position with holding clips/ GI wire mesh. Finally, the joints of the boards shall be sealed with backer rod Ø6mm and silicon sealant etc complete as per direction of Engineer-in-charge. |
| 14 | Supplying and laying Fully vitrified premium quality floor tiles (glossy/mat finish) of size not less than 1200x600mm (Johnson / Khajaria / RAK) of approved quality, brand, colour and size by Engineer-in-charge, laid on 20mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge. (Basic rate of tile is 700/m2) |
| 15 | Providing and laying water proofing treatment in bathroom / toilet etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofingcement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints,corners, junctions of pipes and masonry with polymer mixed slurry. |
| 16 | Providing and laying ceramic anti-skid floor tiles not less than 600 x 600mm or more available size of approved make, in all colours and shades, laid on 20mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 2.2kg/m2 including grouting the joints of tiles having joints of 3 mm width, using epoxy grout, including filling/grouting, finishing etc complete as per direction of Engineer - in -charge, including the cost of cement (Basic rate of tile = ₹610/m2 excluding GST) |
| 17 | Supplying and laying ceramic wall tiles not less than 600 x 600mm size of premium quality of approved make ,quality and colour for dadoing by pasting with chemical adhesive Cerabond, Myk or equivalent and pointing the joints of having joints of 3mm width,using epoxy grout,filling/grouting, cutting edges at 45 degrees at external corners to achieve a neat, uniform and seamless corner joint, finishing, cost and conveyance of all materials labour other incidentals etc. as per the direction of Engineer-in-charge (Basic rate of Tiles Rs. 610/m2 Excl. GST) |
| 18 | Providing and constructing 30x20x15 cm solid concrete block masonry in CM 1:5 in walls, third floor level, using best quality solid concrete blocks including cost & conveyance of all materials, scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, etc complete including the cost of cement as directed by the Engineer - in - charge. |
| 19 | Providing and laying autoclaved aerated cement blocks masonry with 150mm thick AAC blocks in third floor with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer in-Charge. |
| 20 | Plastering with C.M 1:4, 12mm thk for floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge including cost of cement. |
| 21 | Painting on walls with two coats of acrylic smooth exterior paint of premium quality and colour over a priming coat of exterior primer after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete. |
| 22 | Painting on walls with two coat of interior emulsion paint of premium quality and colour over one coat putty (or without putty) and one coat cement primer after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete. |
| 23 | With Putty |
| 24 | Without Putty |
| 25 | Providing and fixing in position aluminium partition using 63.5x38.10x2mm thk.or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thick particle board fixed with necessary EPDM beading including cost and conveyance of all materials labour etc.complete. |
| 26 | Providing and fixing in position half glazed partition using 63.5x38.10x2mm thk.or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thk.by particle board and 5mm thk plain glass fixed with necessary EPDM beading including cost and conveyance of all materials, labour etc. complete. |
| 27 | Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 50mm x 44.5mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 8mm thick particle board fixed with EPDM beading between panel and aluminium frame on all faces and the powder coated aluminium divider section fixed at the mid height including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1No. door lock, 2 Nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1No of door closer of approved make. |
| 28 | Providing and fixing in position powder coated aluminium double leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 50mm x 44.5mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1No. door lock, 1 No tower bolt, 4 Nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 2 Nos of door closer of approved make. |
| 29 | Providing and fixing in position powder coated aluminium single leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 50mm x 44.5mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1No. door lock, 2 Nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1No of door closer of approved make. |
| 30 | Providing and fixing in position powder coated aluminium single leaf door without outer frames vertical styles & top horizontal member of size 50mm x 44.5mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materialsand fixing etc., complete. The door is to be provided with 1No. door lock, 2 Nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1No of door closer of approved make. |
| 31 | Providing and fixing in position fully glazed aluminium super sliding window/ventilator with lock system, powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size 63.5 x 31.75 x 1.60 mm for frames, 38.10 x19.5 x 1.60mm for shutter interlock, vertical and horizontal and plain glass 4mm thick including all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials labour, other incidentals etc. complete. |
| 32 | Supplying and fixing FRP doors with frame work having 1.5mm thick FRP skin moulded with the core material forming a sandwich panel. Necessary wooden supports are to be provided for fixing the accessories such as 100 mm SS hinges 3 nos, tower bolt 1nos, mortice lock 1nos, with necessary screws and grips, including the cost and conveyance of all materials above mentioned fixtures, labour and all other incidentals etc. complete. |
| 33 | Providing and fixing in position fixed type mosquito proof net for ventilator/Exhaust opening using powder coated Aluminium frames of approved quality and shade using 25 x 25 x 1mm size or nearest available sections and stainless steel net, EPDM beading, locking arrangement, screws, nail etc including cost and conveyance of all materials all labour etc.complete as directed by the Engineer in charge. |
| 34 | Supplying and pasting sun control film (Check/ Strips frosted) to the shutter of glazed doors/windows/partitions after cutting to the required size including cost and conveyance of all materials labour other sundries etc. complete all as directed by the Engineer- in- charge. |
| 35 | Supplying and fixing / replacing G.I weld mesh 15mmx15mmx2.2mm to wooden/structural members, doors etc. using necessary screws/welding, painting with one coat of Zinc chromite primer etc. complete. |
| 36 | Providing & fixing in position manually operated Roller Blinds of approved shade and colour with good quality fabric including cost and conveyance of all materials, all labour, other incidentals etc. complete. |
| 37 | Providing & installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. Grids width: 24 mm finished in approved shade. The main runners & cross Tees to have \\"stab\\" installation system made of corrosion protected galvanized steel or approved equivalent. Ceiling tiles are tegular edged Calcium Silicate ceiling tile of size 595x595x15mmtk. GI sections for use as Main Runners are 24 x 38 x 0.30 mm, Cross Tees are 24 x 25 x 0.30 mm, and Wall Angles are 24 x 24 x 0.40 mm and GI supports (GI sections can be changed to higher sections having same or greater thickness to suit the site conditions). False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc.. Rate quoted to include cost and conveyance of all materials, all cut outs required for light fixtures, labour cost, hire charges of equipments, consumables, scaffolding cost, other incidentals etc. complete. |
| 38 | Supplying and fixing roofing/cladding with 0.46mm thick coloured Aluminium Trafford sheet from reputed manufacturers using approved size self tapping, self drilling screws not less than 7 nos in 1 sqm with EPDM sealing washers to be fixed on crest of sheets with minimum end overlaps of 150mm and appropriate side laps including cost and conveyance of all materials labour for all leads and lifts, other incidentals etc. complete. (Finished area of roof sheet before laying ridges/valleys/crimped sheets will only be measured and considered for payment. Overlaps will not be measured) 0.46 mm, Aluminium Colour coated industrial troughed profile with center to center pitch of 125 mm, depth of 38 mm, overall profile width 1044 mm, cover width 920mm. |
| 39 | Supplying, fabricating and erecting of mild steel tubular (round, square and rectangular hollow tubes) of any size and weight by straightening, cutting and welding using as per approved drawing or as instructed, erecting in position to line and level by welding/bolting embedding in concrete including applying one coat of zinc chromate primer & two coats synthetic enamel paint, hire charges for tools and plants, cost of electrodes, wastage, other incidentals etc. complete all as directed by the Engineer-in- charge. |
| 40 | Providing and fixing/replacing Aluminium sheet ridge capping valley gutters 22G, 600mm wide including cost and conveyance of all materials self drilling screws with sealing washers, with a minimum overlap of 150mm at ends, labour for all leads and lifts up to a height of 5 metres etc. complete. |
| 41 | Supplying and fixing 150mm dia PVC square gutter at the eve of roof for collecting rain water including necessary elbow drop,end drop,open nosil, jointer and pathy clamp for holding gutter fixing to line and level cost and conveyance of all materials labour etc. complete. |
| 42 | Providing and fixing 110mm dia PVC rainwater pipe, including seal rings and necessary fittings for connection to the square gutter, complete as directed by the Engineer-in-charge. |
| 43 | Supplying and painting with two coats of Synthetic enamel paint over one coat of red oxide zinc chromate primer of approved brand and colour after mechanical buffing and cleaning the surface by wire brushing in other areas. The rate is inclusive of cost of all materials, labour, other incidentals etc complete as per the direction of Engineer-in-charge . |
| 44 | Providing and Fixing Self Supporting Galvalume sheet Cladding panel, Sandwiched with PUF Panels of 40mm thickness with necessary cutouts, manufactured on continuous line comprising 0.40mm TCT or nearest Colour Coated galvalume Sheets on both sides with light cutting grooves to improve strength and aesthetics. The void between the sheets will be CFC free Polyurethane foam. The thickness of Panel shall form 40 mm outer to outer excluding the profile. The length of the Panel shall be to suit the site length requirement. The panel to be erected vertically using C flashing of size 40mm X 40 mm X 40 mm X 0.4 mm thickness or nearest size at top bottom and sides, C Flashing fixed on to floor /nearest structural members steel screws plugged in to fibre block plug etc as directed by the Engineer - in - charge. |
| 45 | Providing and fixing stainless steel A ISI 304 (18/8) kichen sink without drain board of size 610x460 mm bowl depth 200 mm as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. |
| 46 | Supplying and fixing approved quality and shade wall hung wash hand basin without pedestal of size 475x370x195 mm or nearest size (Hindware/Jaguar/Paryware/RAK/Cera) with necessary brackets, one central single lever quarter turn pillar cock with foam flow, one central 15mm PVC connection, 1 no 15 mm CP stop cock , CP brass waste of standard patterns, 32mm PVC waste pipe, cutting and making good the walls, painting the brackets two coats including cost and conveyance of all materials labour, other incidentals etc. complete. (Base rate of wash hand basin = ₹1607/EA excluding GST) |
| 47 | Supplying and fixing European type glazed ceramic water closet single piece of size 690x360x740mm or nearest available size with soft close seat cover and twin flush cistern, floor mount with S/P trap of accepted brand/ size as directed by Engineer In charge including cost and conveyance of all materials, flexible connections, fixing charges, labour etc complete. (Base rate = ₹11212/EA excluding GST) |
| 48 | Providing and fixing white vitreous urinal basin of size 305x380x650mm and brand decided by Engineer in charge including painting of fittings and brackets, cutting and making good the walls and floors wherever required, cost & conveyance of all materials, installation, labour other incidentals, etc. |
| 49 | Supplying and fixing 750 x 320mm size or nearest size porcelin urinal partition of accepted quality, brand, white colour including cost & conveyance of all materials,labour etc complete as directed by the Engineer-in-charge. |
| 50 | Supplying and fixing the following water supply fittings (Cera/Jaguar/parryware/hindware), including cost and conveyance,all labour for fitting, all incidental charges etc. complete all as directed by the Engineer-in-charge. |
| 51 | CP long body tap |
| 52 | CP Health faucet |
| 53 | Coat Hook |
| 54 | CP towel rail |
| 55 | CP gratings |
| 56 | PVC floor trap (multitrap) |
| 57 | PVC line trap |
| 58 | 110 mm PVC vent cowl |
| 59 | CP angle cock |
| 60 | Supplying, cutting, threading, laying and jointing rigid PVC pipes including all specials such as tees, bends, elbows, reducers, plugs etc. through walls/ concrete, making good the wall/ concrete after fixing, taking connection from the existing water supply including cost and conveyance of all materials, labour, testing the line before embedding etc. complete. |
| 61 | 25mm dia (10kg/cm2) |
| 62 | 32mm dia (10kg/cm2) |
| 63 | 63mm dia (6kg/cm2) |
| 64 | 110mm dia - (6kg/cm2) |
| 65 | Providing, fixing, jointing and testing 20mm Chlorinated Polyvinyl Chloride (CPVC) pipe including all specials such as tees, bends, elbows, reducers, plugs etc.for consealed work, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00m spacing. The rate includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the walls and testing of joints complete as per direction of Engineer in Charge |
| 66 | Supplying and fixing spine and fin based modular workstation of size 1200x600, with partition thickness as 52.4 mm thk and ht - 1200mm including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with fabric at intermediate level. Top block finished in fabric. Bottom block is finished in metal.Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal\Intermediate blocks on main spine Intermediate blocks are given in Fabric finsh. Wire Management through main spine - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelaminated particle board with flat PVC lipping edge banding of size 1200 mm w x 600 mm dPedestals - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal |
| 67 | Supplying and fixing panel & tile based modular workstation of size 1650x600, 900x450 with partition thickness as 52.4 mm thk and ht - 1200mm including powder coated aluminium trims. Tiles on main spine: Combination of top tiles are fabric tackable/white board. Bottom tiles - Plain metal. Intermediate blocks are given in Fabric finsh.Wire Management - Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks.Modesty panels with assembly leg 25 MM THK PLB modesty has been given on the front of the main worktop which is attached to the partition on one end with gable end bkts and on the other end with metal powder coated frontier leg. legs - metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - Main table recta out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1650 mm w x 600 mm d and ERU table recta of size 900 mm w x 450 mm dPedestals - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal |
| 68 | Supplying and fixing desk based modular workstation of size 1800W X 750D, Return side - 1200W X 600D with System ht - 750 mm. Providing metal powder coated leg. Legs are for standard workstation height of 750mm.understructure : Comprising of metal powder coated cross connectors between legs and legs. Made up of metal powder coated finish and the entire assemply is fixed to the worktop.Wire management For 750 high - Standalone power box with wire riser have been considered. Access flap cover will be provided. Switch plate of (8+3 ) module is considered for Power and Data points. Metal modesty: Lazer cut perforated Metal modesty,these are mounted on the worktop with the help of the modesty mounting brackets .Modesty terminates at 400 mm from ground. WORKSURFACE - Out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size1800W X 750D, Return side - 1200W X 600DPedestals - pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castorsKBPT with mousetray - Metal |
| 69 | DGM Cabin & AGM Cabin : Executive High back Providing and placing Executive high back chair of make Godrej, Wipro, Featherlite, Damro.The seat shall made up of plywood and moulded polyurethane foam upholstered with fabric. Backrest assembly is of injection moulded plastic with black mesh fabric and height adjustable lumbar support pad, adjustable head rest assembly. The moulded polyurethane foam for seat is with density=50+/-2kg/m ³. The dimensions of seat shall be- 48 cm(W) x 45 cm(D) and of back shall be 46.5 cm(W) x 51.5cm(H). Armrest 4 way button operated height adjustment(2D). The arm top is made of soft moulded PU. The mechanism of chair shall have following features:360 degree revolving type, Automatic weight sensing Mechanism with multi lock.The chair shall be provided with pneumatic height adjustment (CLASS 4 )which shall have stroke of 11.2 +/- 0.5 cm. The pedestal shall be injection moulded in black plastic GF nylon and fitted with 5 Nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The cushioned head support is adjustable in height and angle for optimum user comfort. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 92.5 to max 103.0 cm. Seat height - min 41 cm to max 51.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. |
| 70 | SM/AM/PO/Chairs : Executive medium back Providing and placing Executive medium back chair of make Godrej, Wipro, Featherlite, Damro.The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 16 cm (W) x 9 cm (H) at fixed position Size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. 2D Armrest has height adjustment. The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment,position tilt limiter with Back-safety return feature. The chair shall be provided with class 4 pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 Nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 102.5 to max 111.5 cm. Seat height - min 44.5 cm to max 53.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. |
| 71 | Visitor chairs:Providing and placing visitors chair of make Godrej, Wipro, Featherlite, Damro with size of back shall be (W)-55cm, (H)-58.0cm & size of seat shall be (W)-50 cm x (D)-44.0cm. The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support size 160mm (W) x 90mm (H) at fixed position Armrest is fixed armrest. The visitor base is cantilever type. Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 102.5 cm. Seat height - min 44.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. |
| 72 | Supply of 6 way (VTPN DB) suitable for 125/160A MCCB incomer as per technical specifications |
| 73 | Installation of 6 way (VTPN DB) suitable for 125/160A MCCB incomer as per scope of work |
| 74 | Supply of 4C x 70 sq.mm A2XFY cable as per technical specifications |
| 75 | Laying of 4C x 70 sq.mm A2XFY cable as per scope of work |
| 76 | Supply of 10 SWG Cu conductor as per technical specifications |
| 77 | Laying of 10 SWG Cu conductor as per scope of work |
| 78 | Supply of gland ang lugs for 4C x 70 sq.mm A2XFY cable with Al lugs as per technical specifications |
| 79 | Glanding and Termination for 4C x 70 sq.mm A2XFY cable with Al lugs as per scope of work |
| 80 | Supply of 160A 4P MCCB as per technical specifications |
| 81 | Installation of 160A 4P MCCB |
| 82 | Supply of 63A, 3P, MCB as per technical specifications |
| 83 | Installation of 63A, 3P, MCB as per scope of work |
| 84 | Supply of 40A, 3P, MCB as per technical specifications |
| 85 | Installation of 40A, 3P, MCB as per scope of work |
| 86 | Supply of 6 Way TPN DB as per technical specifications |
| 87 | Installation of 6 Way TPN DB as per scope of work |
| 88 | Supply of 4 Way TPN DB as per technical specifications |
| 89 | Installation of 4 Way TPN DB as per scope of work |
| 90 | Supply of 8 way SPN DB as per technical specifications |
| 91 | Installation of 8 way SPN DB as per scope of work |
| 92 | Supply of 63A 4P MCB as per technical specifications |
| 93 | Installation of 63A 4P MCB as per scope of work |
| 94 | Supply of 63A, 4P, 30mA, RCCB as per technical specifications |
| 95 | Installation of 63A, 4P, 30mA, RCCB as per scope of work |
| 96 | Supply of 40A, 4P, MCB as per technical specifications |
| 97 | Installation of 40A, 4P, MCB as per scope of work |
| 98 | Supply of 40A, 4P, 30mA, RCCB as per technical specifications |
| 99 | Installation of 40A, 4P, 30mA, RCCB as per scope of work |
| 100 | Supply of 6A/10A/16A, 1P MCB as per technical specifications |
| 101 | Installation of 6A/10A/16A, 1P MCB as per scope of work |
| 102 | Supply of 4Cx 16 Sq.mm A2XFY cable as per technical specifications |
| 103 | Laying of 4Cx 16 Sq.mm A2XFY cable as per scope of work |
| 104 | Supply of gland and lugs for 4C x 16 sq.mm A2XFY cable with Al lugs as per technical specifications |
| 105 | Glanding and termination of 4C x 16 sq.mm A2XFY cable with Al lugs as per scope of work |
| 106 | Supply of 12 SWG Cu conductor as per technical specifications |
| 107 | Laying of 12 SWG Cu conductor as per scope of work |
| 108 | Supply of 4C x 10 sq. mm A2XFY cable as per technical specifications |
| 109 | Laying of 4C x 10 sq. mm A2XFY cable as per scope of work |
| 110 | Supply of 14 SWG Cu conductor as per technical specifications |
| 111 | Laying of 14 SWG Cu conductor as per scope of work |
| 112 | Supply of Glands of 4C x 10 sq.mm A2XFY cable with Al lugs as per technical specifications |
| 113 | Glanding and termination of 4C x 10 sq.mm A2XFY cable with Al lugs as per scope of work |
| 114 | Supply of wiring material with accessories for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit / casing and capping, with modular switch, modular plate, suitable PVC / GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. (as per technical specifications) |
| 115 | Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit / casing and capping, with modular switch, modular plate, suitable PVC / GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. |
| 116 | Supply of wiring material with accessories for group controlled (looped) light point / fan point / exhaust fan point / call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit / casing and capping, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. (as per technical specifications) |
| 117 | Wiring up for group controlled (looped) light point / fan point / exhaust fan point / call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit / casing and capping, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc as required. |
| 118 | Supply of wiring mateial with accessories for circuit / submain wiring along with earth wire with FRLS PVC insulated copper conductor, single core cable in surface / recessed mediumPhase: 1 x 1.5 sq.mmNeutral: 1 x 1.5 sq. mmEarth: 1 x 1.5 sq.mmConduit: 20 mm |
| 119 | Wiring for circuit / submain wiring along with earth wire with FRLS PVC insulated copper conductor, single core cable in surface / recessed mediumPhase: 1 x 1.5 sq.mmNeutral: 1 x 1.5 sq. mmEarth: 1 x 1.5 sq.mmConduit: 20 mm |
| 120 | Supply of wiring material with accessories circuit / submain wiring along with earth wire with FRLS PVC insulated copper conductor, single core cable in surface / recessed mediumPhase: 1 x 2.5 sq.mmNeutral: 1 x 2.5 sq. mmEarth: 1 x 2.5 sq.mmConduit: 20 mm |
| 121 | Wiring for circuit / submain wiring along with earth wire with FRLS PVC insulated copper conductor, single core cable in surface / recessed mediumPhase: 1 x 2.5 sq.mmNeutral: 1 x 2.5 sq. mmEarth: 1 x 2.5 sq.mmConduit: 20 mm |
| 122 | Supply of 2x2 LED Recess Mount Light Fitting as per technical specifications |
| 123 | Installation of 2x2 LED Recess Mount Light Fitting as per scope of work |
| 124 | Supply of LED Tube Light Fittings (Integral) - 1200mm/~20W as per technical specifications |
| 125 | Installation of LED Tube Light Fittings (Integral) - 1200mm/~20W as per scope of work |
| 126 | Supply of Tube LED Tube Light Fittings (Integral) - 600mm/~10W as per technical specifications (Mirror Light) |
| 127 | Installation of Tube LED Tube Light Fittings (Integral) - 600mm/~10W as per technical specifications (Mirror Light) |
| 128 | Supply of 35W 1200mm BLDC Ceiling Fan as per technical specifications |
| 129 | Installation of 35W 1200mm BLDC Ceiling Fan as per scope of work |
| 130 | Supply of extra down rod of 19mm dia heavy gauge including painting etc, required for ceiling fan as per technical specifications |
| 131 | Installation of extra down rod of 19mm dia heavy gauge including painting etc, required for ceiling fan as per scope of work |
| 132 | Supply of SS Fan Hooks on the ceiling by chipping and grouting as per technical specifications |
| 133 | Installation of SS Fan Hooks on the ceiling by chipping and grouting as per scope of work |
| 134 | Supply of Ceiling Exhaust Fan (100mm) as per technical specifications |
| 135 | Installation of Ceiling Exhaust Fan (100mm) as per scope of work |
| 136 | Supply of 300mm HD exhaust fan as per technical specifications |
| 137 | Installation of 300mm HD exhaust fan as per scope of work |
| 138 | Supply of 300mm LD exhaust fan as per technical specifications |
| 139 | Installation of 300mm LD exhaust fan as per scope of work |
| 140 | Supply of BLDC 400mm wall fan as per technical specifications |
| 141 | Installation of BLDC 400mm wall fan as per scope of work |
| 142 | Supply of suitable size Gl/PVC box with modular plate, cover, providng and fixing 3 Nos. 3 pin 5/6 A modular socket outlets (2M) and 2 Nos. 5/6 A modular switches (1M) including providing connection etc. as required - Computer point |
| 143 | Fixing of suitable size Gl/PVC box with modular plate, cover, providng and fixing 3 Nos. 3 pin 5/6 A modular socket outlets (2M) and 2 Nos. 5/6 A modular switches (1M) including providing connection etc. as required - Computer point |
| 144 | Supply of suitable size PVC /GI modular box with modular plate,cover, providing and fixing two number of 5/6 A modular socket outlet (2M) and two number of 5/6 A modular switch (1M) - including providing connections etc. as required |
| 145 | Fixing of suitable size PVC /GI modular box with modular plate,cover, providing and fixing two number of 5/6 A modular socket outlet (2M) and two number of 5/6 A modular switch (1M) - including providing connections etc. as required |
| 146 | Supply of suitable size PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) including providing connections etc. as required |
| 147 | Fixing of suitable size PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) including providing connections etc. as required |
| 148 | Supply of suitable size PVC /GI modular box with modular plate,cover, providing and fixing one number of 5/6 A modular socket outlet (2M) and one number of 5/6 A modular switch (1M) - including providing connections etc. as required |
| 149 | Fixing of suitable size PVC /GI modular box with modular plate,cover, providing and fixing one number of 5/6 A modular socket outlet (2M) and one number of 5/6 A modular switch (1M) - including providing connections etc. as required |
| 150 | Supply of suitable size PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) and one number of 15/16 A modular switch (1M). Including providing connections etc. as required - Power Points |
| 151 | Fixing of suitable size PVC /GI modular box with modular plate,cover, providing and fixing one number of 15/16 A modular socket outlet (2M) and one number of 15/16 A modular switch (1M). Including providing connections etc. as required - Power Points |
| 152 | Dismantling of existing wiring and other electrical fittings in the area as per scope of work |
| 153 | Supply of 12 HP VRF outdoor unit of specified capacities, nominal capacity condensing unit with all standard fittings, safety devices, llike HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. as per technical specifications & scope of work |
| 154 | Supply of Indoor unit compatible with above outdoor unit with nominal capacity as given below |
| 155 | 2.3 TR Four Way Cassette with wireless remote and panel |
| 156 | 2 TR Four Way Cassette with wireless remote and panel |
| 157 | 1 TR Hiwall |
| 158 | Supply of Y-Joints |
| 159 | Cordless Remote |
| 160 | Installation,Testing and Commissioning of specified capacities, nominal capacity condensing unit with all standard fittings, safety devices, llike HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. as per technical specifications & scope of work |
| 161 | 12 HP VRF outdoor unit |
| 162 | 2.3 TR Four Way Cassette with wireless remote and panel |
| 163 | 2 TR Four Way Cassette with wireless remote and panel |
| 164 | 1 TR Hiwall |
| 165 | Y-Joints |
| 166 | SITC of Refrigerant piping (Suction & Discharge) Hard / Soft drawn Copper tube of suitable sizes,with copper elbows, tees, Tubular Nitrile Insulations etc as required |
| 167 | Referigerant Piping with necessary clamping for VRF |
| 168 | Communication Cable |
| 169 | Supply, filling, testing and commissioning including topping up of R410 A Refrigerant |
| 170 | Power Cabling from Isolator to Outdoor Unit |
| 171 | SITC of Hard PVC drain piping - Drain Piping with Tubular Nitrile Rubber Insulation: complete in all respects. well clamped Till Drain Points |
| 172 | Supply, Installation, termination,testing and commissioning modular of Single Port Faceplate,backbox and RJ11 Outlet with all accessories suitable for CAT3 cable/telephone cable. Rate shall be include all nessary accessories like screw, proper labelling with color code, etc , as complete with all respects complying with relevant standard specification. Acceptable Make :Legrand/Schneider/Substantially equivalent |
| 173 | Supplying and laying of 2 pair 0.5mm dia FR PVC insulated anealed copper conductor, unarmoured telephone cable through existing surface/through wall/through floor through concealed PVC conduit as per site condition.PVC conduit supply & laying is also in the scope of contractor. Acceptable Make: Havells/ Polycab/ Finolex/ Substantially equivalent |
| 174 | Supply, installation, termination, testing and commissioning of 20 Pair MDF Box with Krone Modules with all accessories as per site condition Acceptable Make :ADC-Krone/Bestnet/Syntex/Substantially equivalent |
| 175 | Supply and laying of 20 pair 0.5mm dia FR PVC insulated anealed copper conductor, unarmoured telephone cable through existing surface/through wall/through floor, through concealed PVC conduit as per site condition.PVC conduit supply & laying is also in the scope of contractor Acceptable Make :Havells/ Polycab/ Finolex /Substantially equivalent. |
| 176 | Supply, Installation, termination,Testing and Commissioning of Analogue phones.Acceptable Make :Panasonic KXTS400SX/Substantially equivalent |
| 177 | Supply, Installation, termination,Testing and Commissioning of Speaker Telephones with Caller ID.Make : Panasonic, Model no: KX-TSC62SX or Substantially Equivalent Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender