Defence Statutory Bodies & Commissions/Committees Closing in 6 days TDR #58412489

Tender For Provision Of Shed Near Building No T-232 At 31 Mcu And Oher Minor Work At 27 Ed Under Ge (Af) Gurgaon No. 01

Issued by Statutory Bodies & Commissions/Committees · Gurgaon, Haryana
Tender Value
32.56 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
65120
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of Shed Near Building No T-232 At 31 Mcu And Oher Minor Work At 27 Ed Under Ge (Af) Gurgaon No. 01

BOQ

Name of Work:- PROVISION OF SHED NEAR BUILDING NO T-232 AT 31 MCU AND OHER MINOR WORK AT 27 ED UNDER GE (AF) GURGAON NO. 01
Sl. No. Item Description
1Schedule-A B/R PORTION
2M&L for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watering all as specified and as directed by Engineer in Charge.
3M&L for PCC (1:3:6) type C2 using 40mm graded aggregate for foundation filling and mass concrete etc complete all as specified and as directed by Engineer in Charge.
4S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 etc all as specified and as directed by Engineer in Charge.
5S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as all as specified and as directed by Engineer in Charge.
6M&L for preparation of untreated steel/iron surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coats of sythetic enamel paint over and incl one coat of red oxide primer.all as specified and as directed by Engineer in Charge.
7M&L for applying two coats of black bituminous paint on wood , steel and concrete surfaces of any description exceeding 10 cm in width or girth all as specified and as directed by Engineer in Charge.
8M&L for hard core of gauge not exceeding 63mm of broken bricks deposited spread and leveled in layers not exceeding 15cm thick watered and rammed to a true surface all as specified and as directed by Engineer in Charge.
9M&L for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) in sub base of floor all as specified and as directed by Engineer in Charge.
10M&L green Marble work 18 to 20mm thick (table rubbed and polished) in floor and skirting,steps, jambs, pillars, windowcills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick cement screed bed in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match with shade of marble including grinding, rounding to edges and polishing complete all as specified.
11Excavating in trenches, n exc 1.5m wide and n exc 1.5 m depth; for foundation, etc. or for shafts, wells, cesspits, manholes,pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out soft loose soil all as specified and as directed by Engineer in Charge.
12Returning, filling in, including spreading, levelling , watering and well ramming in layers not exc 25 cm.
13M&L Cement concrete type D2, 1:4:8 using 40mm graded agregate as in foundations, filling and mass concrete complete all as specified and directed by Engineer in Charge.
14M&L for brick work built in cement mortar (1:4) with sub class 'B' brick straight or curved on plan exc 6m mean radi us for man holes all as specified and as directed by Engineer in Charge.
15M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick work and finishing the surface even and smooth (without using extra cement) etc all as specified and as directed by Engineer in Charge.
16M&L Finishing walls with exterior Acrylic all weather emulsion paint (100% acrylic) exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including preparation of new surfaces complete all as specified and directed.
17M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges all as specified and as directed by Engineer in Charge.
18M&L Sand filing under floor or in foundation including watering and consolidation sand cushioning complete all as specified and directed by Engineer -in Charge..
19M&L for Parking coloured Tiles dark shade 12 to 16 mm thick (Square/rectangular) polished, area 400mmX400mm of eachtile inparking set and jointed in neat cement slurry over 20 mm thick screed bed in Cement Mortar (1:4) as in Path, complete all as specified and as directed.
20M&L for Epoxy Coated Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigments complete all as specified and directed by Engineer -in Charge..
21M&L for PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in surface channels and drain complete all as specified
22M&L preparation of new surface of kerb stone of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed.
23M&L PCC 1:4:8 type D-2 as in drain etc all as specified and directed by Engr-in-Charge
24M&L PCC 1:3:6 type C-2 as in surface channel for drain all as specified and directed by Engr-in-Charge
25Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitered/stopped ends etc.
26M&L, cement concrete type B-1,1:2:4 (20mm graded aggregate) as in coping, ramp including slightly rounded or chamfered angles and throating all as specified and directed by Engineer-in-Charge
27M&L RCC Nominal Mix Concretes type B0 1;2;4(12.5 mm graded aggregate) as foundation including rafts,footing foudation beam,plinth beam base for columan etc.
28M&L Flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bresumers, lntels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc.for rough finished surfaces of concrete surface complete all as specified and directed.
29Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed.
30Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed.
31S&F in repairs for 3 to 4 mm thick Alluminium Composite Panel with combination of aluminium skin material of 0.25mm Thick (coloured sheet as directed ) alluminium sheet of alloy grade 1100 H cover material,coated on external side with PVDF coating containing 70% resins for anti-fungal & anti bacterial properties and the center core shall be with natural polythelene (LDPE and HDPE) bonded to the alluminium skin on both side. Cladding panal to be fixed with Rawl plug and SS screw all as approved on walls and roof including necessary accessories, complete all as per manufacturer's intructions and as directed by Engr-in-charge.
32Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete
33M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and directed by Engr-in-charge
34Removing of old debris obtained from excavation/demolition building material to a distance exc 10 Km but n exc 15 Km and deposited out side the MD land as per NGT norms. Note :- Searching of Place of Disposal out side the MD Land will be the responsibility of Contractor and rate of any distance shall be included in quoted unit rate all as specified and as directed by Engineer in Charge.
35S&F Anodised aluminium frame for doors,windows,ventilators, powder coated (minimum thickness of powder coating shall not be less than 50 micron), side hunge one or more rebates including necessary jointing cleats,glazing clips, ruber neoprene packing anodised aluminium snap beading screw Tee etc section for weighing not less than 1.4 kg/RM complete all as specified and directed
36S&F Anodised aluminium door shutters powder coated (minimum thickness of powder coating shall not be less than 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifiedNote:- Each panel shall be measured separetely. Glass pane shall be measured and paid separetely.
37S&F 5.5 mm thick sheet glass ordinary quality in square or rectangular in size n.exc .5 sqm each in aluminium door or window shutter including taking out old damaged glass pane complete all as specified and directed
38Supply and fixing10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet Suitably placed fixing in Aluminium pation etc
39S&F Brass mortice lock, 4 levers, verticle type, size 100 mm, complete all as specified and directed.
40S&F Floor door stopper aluminium ally body and tongue anodised with hand drawn steel spring to door shutter of size 140 mm etc.
41Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s),complete all as specified and directed by Engineer-in-Charge.
42M & L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement all as specified and directed by Engineer-in-Charge.
43M&L for preparation of newly plastered surfaces of walls by Vacuum based sanding machine complete all as specified, applying wall care putty min 2mm thick (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured including primer by auto roller complete complete all as specified and directed by Engineer-in-Charge.
44Schedule-A E/M PORTION
45Supply and Fixing of modular switches 1 way, 6 Amp 1 module complete all as specified & directed by Engineer - In-Charge.
46Supply and Fixing modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified & directed by EIC.
47Supply and Fixing of modular switches 1 way, 16 Amp 1 module complete all as specified & directed by Engineer - In-Charge.
48Supply and Fixing modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified & directed by EIC. Please Enable Macros to View BoQ information
49Supply and Fixing modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified & directed by EIC. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58412489
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 32.56 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of Shed Near Building No T-232 At 31 Mcu And Oher Minor Work At 27 Ed Under Ge (Af) Gurgaon No. 01
Basic Detail
Tender No GE(AF) No 1/GUR-77/2026-27
Bidding Type Tender
Location
City Gurgaon
State Haryana
Key Dates
Publish Date 06 Nov 2026
Submission Date 27 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 32.56 Lakhs
Tender Fee 500
EMD 65120
Exemption Available
Document List
bc8044c9-2d65-49d7-b6fa-664678ec8cf5.html
BOQ_894763.xls
TenderDocument77.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

bc8044c9-2d65-49d7-b6fa-664678ec8cf5.html

xls

BOQ_894763.xls

pdf

TenderDocument77.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender