Tender For Comprehensive Maintenance Including B/R &E/M Services At 17Fbsu And Its Lodger Units Under Ge (Af) Trivandrum.
Tender Value
19.96 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
21 days left
EMD
39920
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Including B/R &E/M Services At 17Fbsu And Its Lodger Units Under Ge (Af) Trivandrum.
BOQ
| Sl. No. | Item Description |
| 1 | B/R WORKS |
| 2 | Taking down door / window frame with shutter (without taking of shutter from the frame) area not exec 1.5 Sqm complete all as specified and directed. |
| 3 | Taking down door / window frame with shutter (without taking of shutter from the frame) area exec 1.50 Sqm but not exec 4 Sqm complete all as specified and directed. |
| 4 | Taking down shutters only of any description area not exec 1.00 Sqm each complete all as specified and directed. |
| 5 | Taking down shutters only of any description area exec 1.00 Sqm but not exec 2.00 Sqm complete all as specified and directed. |
| 6 | S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 7 | S& F factory made 30 mm thick flush shutter, solid core construction, with block board core and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match complete all as specified & directed. |
| 8 | S & F 30mm thick second class hardwood glazed and Skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), square with frame plain, chamfered or rounded. fitted with cut and metered beads for securing glass, etc.; sizes of members of shutters a specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed. |
| 9 | S & F anodized aluminum grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless-steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminum standard section around the opening, complete all as specified and directed. |
| 10 | S& F power coated anodized aluminum frame for doors, windows, ventilators/ partitions with one rebates including joint cleat for fixing etc complete all as specified and directed. |
| 11 | S& F powder coated anodized aluminum window and ventilator shutters, fixed type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, complete all as specified and directed. |
| 12 | S& F powder coated anodized aluminum window and ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, complete all as specified and directed. |
| 13 | S& F powder coated sliding window with three track shutters including (two glass and one wire mesh) powder coated anodized aluminum frame work aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, complete all as specified and directed. |
| 14 | S & F powder coated aluminum door shutters, aluminum sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles, hinges anodized aluminum snap beading screws etc complete all as specified and directed. |
| 15 | S&F Solid PVC Door Frame of size 50mm x 47mmmade out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 16 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 17 | M&L for 18/19mm thick prelaminated marine plywood, High quality BWP Marine grade, prelaminated on both side with decorative choice lamination , fixed with stainless steel screws to frame work as in cupboard shutter, study table etc complete all as specified and directed. |
| 18 | M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 19 | S & F 100 mm long Mild steel medium weight cold rolled butt hinges and fixed with screw/welded to frames etc complete all as specified and directed. |
| 20 | S&F butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized and fixed, , 75 mm long complete all as specified and directed |
| 21 | S & F 100 mm long extruded aluminum alloy handles, fabricated type, anodized, ISI marked complete all as specified and directed. |
| 22 | S & F 150 mm long aluminum, anodized barrel tower bolt of extruded section complete all as specified and directed |
| 23 | S & F 100 mm long aluminum, anodized barrel tower bolt of extruded section complete all as specified and directed |
| 24 | S & F 300 mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminum alloy and fixed complete all as specified and directed. |
| 25 | Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed |
| 26 | S&F 3 mm thick sheet glass ordinary quality n.exc 0.50 Sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed. |
| 27 | Ditto-- all as per Item No.27 above but figured glass complete all as specified and directed. |
| 28 | S & F 4mm thick sheet glass ordinary quality fixing with putty or wood/ steel staples in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 29 | S & F in repair Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring of 150mm long complete all as specified and directed. |
| 30 | M&L for 9mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work in repairs complete all as specified and directed. |
| 31 | S & F stainless steel of 0.36 mm nominal dia of wire and average width of aperature 1.4 mm, fixed with aluminum wire staples complete all as specified and directed. |
| 32 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden shutter or aluminum shutters fixed complete all as specified and directed. |
| 33 | S & F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples in wooden shutter or aluminum shutters complete all as specified and directed. |
| 34 | Taking down aluminum door/window shutters any size and refixing the same after repair /changing necessary hinges and builders hardware to same position all as per direction of Engg in charge note: the rate inclusive of builders hardware required for easy functioning of aluminum shutter complete all as specified and directed |
| 35 | S & F brass Mortice lock 4 leavers vertical type size 100mm fixed in repairs complete all as specified and directed. |
| 36 | S & F in repairs 100mm long butt hinges extruded Aluminium alloy with galvanized Mild steel hinge pin anodized and fixed type B21 complete all as specified and directed |
| 37 | S & F in repair Mild steel medium weight butt hinges 100mm size in existing/ near portion for easy functioning of shutters including making good the disturbed surface complete all as specified and directed |
| 38 | S & F in repair Mild steel medium weight butt hinges 75mm size in existing/ near portion for easy functioning of shutters including making good the disturbed surface complete all as specified and directed |
| 39 | S & F in repair aluminum anodized handle of size 150mm complete all as specified and directed |
| 40 | S & F in repairs aluminum anodized barrel tower bolt of extruded section 100mm long complete all as specified and directed |
| 41 | Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including any type frame work and cover fillets etc, complete all as specified and directed |
| 42 | M&L for providing and fixing 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to flat surface over GI frame work seamless perimeter 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exec 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and including two coats of OBD over 3mm thick acrylic putty, complete all as specified and directed.Note : Rate inclusive all type of design i.e. offsets and projection. The area measured only length and width of room and building. Design of ceiling approved by Engineer-in-charge /GE. |
| 43 | S & F Anodized aluminum snap grid frame work for false ceiling all as specified of grid size 605 X 605mm complete all as specified and directed. |
| 44 | M & L for 4-6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. Note : The tiled floor has to be demolished/ dismantled entirely up to the sub base level/ RCC floor level including backing coat irrespective of number of layers of tiles and taking down wall plaster also including in wall tiles. |
| 46 | M & L for vitrified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 47 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 48 | M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed. |
| 49 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor subbase for receiving of floor tiles complete all as specified and directed. |
| 50 | M&L for Glazed ceramic coloured tiles/Wall cladding tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick or any size as directed by Eng. in Charge set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed |
| 51 | M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 52 | Demolition of cement concrete in ground floors and paving's n exec 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 53 | Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 54 | M&L for Brickwork with sub- class ‘B’ old size bricks straight or curved on plan exec 6 m mean radius in CM 1:6, complete all as specified and directed. |
| 55 | M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in M 1:4, complete all as specified and directed. |
| 56 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 57 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 58 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | M&L 5 mm thick rendering in cement mortar 1:3 on fair faces of brick work or concrete surfaces, rendering finished even and smooth as in ceiling complete all as specified and as directed. |
| 60 | M&L for preparation of new treated ceiling surface and applying three coats of white wash complete all as specified and directed. |
| 61 | M&L for preparation of new plastered surface of wall and applying two coats of weather coat paint over a coat of primer complete all as specified and directed. |
| 62 | M&L for preparation of new treated wall surface and applying two coats of acrylic emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 63 | S & F in repair 20mm bore, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings incl taking down the pipe complete all as specified and directed |
| 64 | S & F in repair 25 mm bore, 3- layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings incl taking down the pipe complete all as specified and directed |
| 65 | Cleaning of water tank capacity 500 liters and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.Note :- Rate inclusive of dewatering of tank, removal of sludge, high pressure cleaning , vacuum cleaning & apply anti bacterial agents/ Ultra violet radiations. |
| 66 | Cleaning of water tank capacity 1000 liters and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.Note :- Rate inclusive of dewatering of tank, removal of sludge, high pressure cleaning , vaccum cleaning & apply anti bacterial agents/ Ultra violet radiations. |
| 67 | S & F in repair PVC automatic water control float valve vertical or horizontal type with 3/4 inch size and threaded connection all as specified and directed |
| 68 | S & F in repair chromium plated fancy type 15 mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe/ ppr pipes or brass ferrule complete all as specified and directed |
| 69 | S & F in repairs fancy type Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron /PPR pipes and fixed complete all as specified and directed |
| 70 | S & F in repair fancy type 15 mm dia concealed type Stop valves, chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed |
| 71 | S&F in repair fancy type 15 mm dia angle cock, cast copper alloy screwed for iron pipe & fixed complete all as specified and directed |
| 72 | S & F in repairs brass CP mixture for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed |
| 73 | S & F in repairs 125 mm size chromium plated brass shower rose with or without swivel joints and swivel arms for fixing with 15 mm dia bore pipe complete all as specified and directed. |
| 74 | S&F in repairs stainless steel sink grade 304 with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe cast iron cantilever brackets connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed |
| 75 | S&F in repairs EWC seat cover of any pattern including cover and Mild steel chromium plated hinging devices of any colour all as specified and directed. |
| 76 | S&F in repairs health faucet, CP with flexible pipe of bore 15mm with necessary holder , screws and fasteners fitted to wall complete all as specified and directed. |
| 77 | Supply & fixed (in repair) vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and Health Faucet with pipe complete all as specified and directed. |
| 78 | S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white integral foot rest, including concrete bedding with trap 100mm complete all as specified and directed |
| 79 | S&F in repairs Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe), including urinal spreader of PTMT any colour for fixing with 15 mm dia pipe and outgoing pipes complete all as specified and directed. |
| 80 | S & F for 500 liters capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tank of any capacity complete all as specified and directed |
| 81 | S & F for 1000 liters capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old tank of any capacity complete all as specified and directed |
| 82 | S&F in repairs PVC overhead tank cover for tanks of capacity 500ltr to 1000 ltr including locking bolts and securing the hinges in proper position complete all as specified and directed. |
| 83 | S&F looking mirror 600 x 450 mm beveled edge, of selected quality glass fancy type complete all as spd & directed. |
| 84 | S&F in repairs 20mm dia tabular towel rail brass CP `D`type , 60 cm long between flanges including one pair of brackets complete all as specified and directed. |
| 85 | S&F in repair 32 mm dia PVC waste pipe 90 cm long flexible type for Wash basin complete all as specified and directed. |
| 86 | S&F in repairs bathroom cabinet with mirror 250x400 mm size, including removal of existing cabinet complete all as specified and directed. |
| 87 | S&F in repairs 25mm dia stainless steel curtain rod approved pattern / colour / design of including decorative end caps/dome, etc. complete all as specified and directed. |
| 88 | S&F in repairs decorative wooden decorative curtain brackets and end fittings completely all as specified and directed. |
| 89 | S&F in repairs stainless steel soap tray fixed with brass screws complete all as specified and directed. |
| 90 | S&F in repairs toilet paper holder, brass, CP brass fitted to wall complete all as specified and directed. |
| 91 | S & F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good and also cutting, screwing and waste complete all as specified and directed. |
| 92 | S & F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, in walls, floors and their making good and also cutting, screwing and waste complete all as specified and directed. |
| 93 | M&L 32mm dia bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. With long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs complete all as specified and directed. |
| 94 | S&F 15mm bore PVC connection pipe, 600mm long fixed as in repairs complete all as specified and directed. |
| 95 | S&F in repair 75 PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed. |
| 96 | S&F in repairs glass corner shelf made out of 5 mm thick glass guarded with CP brass guards complete all as specified and directed. |
| 97 | S&F in repairs straight glass shelf made out of 5 mm thick glass graded with CP brass guards complete all as specified and directed . |
| 98 | S & F in repairs, vitreous china WHB white, flat back, size 550x400mm with brackets, Inc. cutting for & pinning in ends of brackets, Inc. waste fitting, PTMT 32mm dia complete all as specified and directed. |
| 99 | Supply & fixed in repair 10 litre capacity Flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed. |
| 100 | M & L for preparation of old treated surfaces of wall any description and applying one coat of white wash complete all as specified and directed. |
| 101 | M & L for preparation of old treated surfaces of ceiling and applying one coat of white wash complete all as specified and directed |
| 102 | M & L for preparation of old treated surfaces of walls and applying one coat of acrylic emulsion distemper complete all as specified and directed. |
| 103 | M & L for preparation of old treated surfaces of walls and applying two coat of acrylic emulsion distemper over one coat of primer including complete removal of existing surface complete all as specified and directed. |
| 104 | M&L for preparing old treated wooden surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface complete all as specified and directed. |
| 105 | M & L for preparing old steel surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint including preparation of surface complete all as specified and directed. |
| 106 | M & L for preparation of old wall surfaces and applying one coat of weather proof coat paint complete all as specified and directed.Note : Rate inclusive of necessary staging / scaffolding if required at site. |
| 107 | M & L for preparation of old wall surfaces and applying Two coat of weather proof coat paint complete all as specified and directed.Note : Rate inclusive of necessary staging / scaffolding if required at site. |
| 108 | M & L for preparation and cleaning of old surface of Mangalore pattern tiles and applying two coat of acrylic weather coat paint including necessary scaffolding asper site requirement and complete all as specified and directed. |
| 109 | M&L for applying required coat of wall care putty on wall, surface as even and smooth finish complete all as specified and directed. |
| 110 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using steel patti/wire brush/broom/ one coat of weather coat terracotta paint over wall or floor/ MP tiles surfaces including the preparation of the surfaces, complete all as specified and directed. |
| 111 | E/M Works |
| 112 | Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed. |
| 113 | M&L for following point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through non metallic rigid PVC conduit and accessories in surface of walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes with 3.00 mm thick laminated sheet cover//2mm Modular metal flush box and suitable modular white cover plate with frame to house switch/regulators etc complete all as specified and directed. |
| 114 | (a) One fan/light /bell point controlled by one switch/bell push complete all as specified and directed. |
| 115 | (b) One switch socket outlet 5 Amps on independent board complete all as specified and directed. |
| 116 | (c ) One socket outlet 5 Amps on the same board complete all as specified and directed. |
| 117 | All as per Item No 114 here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 Sqmm cable as earth continuity conductor for power Socket on independent board on the existing/new PVC surface conduit complete all as specified and directed. |
| 118 | M&L for following point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through PVC Casing Capping and accessories in surface of walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes with 3.00 mm thick laminated sheet cover/2mm Modular metal flush box and suitable modular white cover plate with frame to house switch/regulators etc including complete all as specified and directed. |
| 119 | (a) One fan/light /bell point controlled by one switch/bell push complete all as specified and directed. |
| 120 | (b) One 3 pin switch socket outlet 5 Amps on independent board complete all as specified and directed. |
| 121 | (c ) One 3 pin socket outlet 5 Amps on the same board complete all as specified and directed. |
| 122 | All as per Item No 119 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 Sqmm PVC insulated copper cable as earth continuity conductor for one switch socket outlet on independent board complete all as specified and directed. |
| 123 | M&L for following point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated sheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 2mm Modular metal flush Box and suitable Modular white cover plate with frame/1.22 mm thick pressed steel terminal boxes with 3.00 mm thick laminated sheet cover to house switch/regulators etc complete all as specified and as directed. |
| 124 | (a) One fan/light /bell point controlled by one switch/bell push complete all as specified and directed. |
| 125 | (b) One switch socket outlet 5 Amps on independent board complete all as specified and directed. |
| 126 | (c ) One 3 pin socket outlet, 5 Amps on the same board with other switches with cables 1.5 Sq. mm size complete all as specified and directed. |
| 127 | All as per Item No 124 here-in- before but with 2.5 Sqmm PVC insulated multistranded copper conductor with 2.5 Sqmm cable as earth continuity conductor for power Socket on independent board on the existing/new PVC surface conduit complete all as specified and directed. |
| 128 | M&L for following point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through existing non metallic rigid PVC conduit and accessories in surface of walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes with 3.00 mm thick laminated sheet cover//2mm Modular metal flush box and suitable modular white cover plate with frame to house switch/regulators etc taking down old one complete all as specified and directed. |
| 129 | (a) One fan/light /bell point controlled by one switch/bell push complete all as specified and directed. |
| 130 | (b) One switch socket outlet 5 Amps on independent board complete all as specified and directed. |
| 131 | All as per Item No 129 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 Sqmm PVC insulated copper cable as earth continuity conductor for one switch socket outlet 15 Amps on independent board complete all as specified and directed. |
| 132 | Supply and fix in replacement switch piano flush button single pole one-way 5 amps complete all as specified and directed. |
| 133 | Supply and fix in replacement socket flush type 2 in 1, 3 pin 5 amps complete all as specified and directed. |
| 134 | Supply and fix switch socket combination 3 pin 5 Amps flush type in repairs complete all as specified and directed. |
| 135 | Supply and fix in replacement of switch socket combination 5A/16 A , 5 in 1 flush type , universal flush type complete all as specified and directed. |
| 136 | Supply and fix in replacement modular switch 1 way 6A 1 module complete all as specified and directed.Make:Anchore/Legrand/Havells |
| 137 | Supply and fix in replacement modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.Make: Anchor/Havells/Legrand |
| 138 | Supply and fix in replacement modular switch 1way 16 A 1 module complete all as specified and directed. |
| 139 | Supply and fix in replacement modular socket 6A /16A 2/3 pin combination 2 module complete all as specified and directed. |
| 140 | Supply and fix in replacement modular Fan regulator , 120 w - 2 module complete all as specified and directed. |
| 141 | Supply and fix in replacement Modular bell push 6 A 1 module complete all as specified and directed. |
| 142 | Supply and fix in replacement ceiling rose surface bakelite with three terminals complete all as specified and directed.Make- Anchor/Havells/Legrand. |
| 143 | Supply and fix in replacement bell push flush type 5 Amps 230V single pole complete all as specified and directed. Make- Anchor/Havells/Legrand. |
| 144 | Supply and fix and Replace electric bell Ding Dong, AC 230 volts complete all as specified and directed. Make- Anchor/Havells/Legrand. |
| 145 | Supply and fix and Replace buzzer, AC 230 volts complete all as specified and directed. Make- Anchor/Havells/Legrand. |
| 146 | S & F in replacement electronic type fan regulator rotary step 120/280 watt complete all as specified and directed. Make- Anchor/Havells/Legrand |
| 147 | M&L for submain wiring with 2 Runs 4 Sq mm for phase and neutral and 1 runs of 4 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and accessories and concealed in walls / ceiling all as specified including taking down old sub main wiring complete all as specified and directed. |
| 148 | M&L for submain wiring with 4 Runs 6 Sq. mm for phase and neutral and 1 runs of 6 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and accessories and concealed in walls / ceiling all as specified including taking down old sub main wiring complete all as specified and directed. |
| 149 | Taking down unserviceable MCB distribution board, S & F SPN 4 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces complete all as specified and directed. Make- Anchor/Havells/Legrand. |
| 150 | All as per item No 150 here in before but SPN 8 way complete all as specified and directed. Make- Havells/Legrand/ABB |
| 151 | All as per item No 150 here in before but SPN 12 way complete all as specified and directed. Make- Havells/Legrand/ABB |
| 152 | Supply and fix in replacement sheet metal enclosure distribution board for fixing MCBs with double door, TPN 4 way, 415 volts with suitable bus bar complete all as specified and directed. Make- Anchor/Havells/Legrand. |
| 153 | S & F in replacement Sheet Metal Enclosure for MAIN DBs, Triple Pole & Neutral, 4 Way , 415 Volts with 125 Amps rated neutral bus bar double door vertical type, grouting the DB and making good the disturbed surfaces with extra cement without any additional cost suitable for TP/SP outgoing to accommodate and including Space for fixing of MCCB 125A 25 KA as incoming complete all as specified and directed. Make- ABB/Havells/Legrand. |
| 154 | Taking down ceiling fan 1200mm sweep from any height and bringing down to floor, dismantling the ceiling fan, re-assembling the ceiling fan and refixing in position after repairs complete all as specified and directed. Note: Spares will be measured and paid separately |
| 155 | All as per Item No.155 above but for exhaust fan 300mm/450mm sweep including replacing of rusted nut and bolts complete all as specified and directed. |
| 156 | M & L for cutting & removing the burnt winding of ceiling fan of 1200 sweep and cleaning the slot, rewinding with super enameled copper wire of suitable size, varnishing heating and insulating and reassembling the spares complete all as specified and directed. |
| 157 | All as per item No. 157 above but for exhaust fan 300mm sweep complete all as specified and directed. |
| 158 | All as per item No. 157 above but for exhaust fan 450mm sweep complete all as specified and directed. |
| 159 | Supply and replace the fan motor for wall mounting fan/ pedestal of 400/450mm sweep complete all as specified and directed. |
| 160 | Supply only ball bearing of ceiling fan of 1200 mm sweep complete all as specified and directed. Make : SKF/NBC/TATA |
| 161 | All as per item No 161 but Exhaust fan of 300 mm sweep complete all as specified and directed. |
| 162 | All as per item No 161 but Exhaust fan of 450 mm sweep complete all as specified and directed. |
| 163 | M&L for Spray Painting of ceiling fans with one coat of synthetic enamel paint of same colour including preparation of old surfaces complete including numbering of fans as existing complete all as specified and directed. |
| 164 | Supply and Replace capacitor 2.5 mfd suitable for ceiling fan complete all as specified and directed. Make – KELTRON/KEIL/BHEL/UNIVERSAL/TIBCON |
| 165 | Supply and Replace capacitor 4 mfd suitable for exhaust fan complete all as specified and directed. Make – KELTRON/KEIL/BHEL/UNIVERSAL/TIBCON |
| 166 | Disconnecting and removing the old unserviceable light fitting box type 1 x 40W / 1 x 28 Watts T-5 fitting and supply and fix new energy efficient LED batten 1 x 20 watts 4 feet long CRCA body powder coated white batten type MCL LED type all prewired including connection with twin core flexible PVC 0.5 Sqmm complete all as specified and directed. Make; Havells/Wipro/Crompton/Luker |
| 167 | Disconnecting and removing the old unserviceable light fitting box type 1 x 20W / 1 x 14 Watts T-5 fitting and supply and fix new energy efficient LED batten 1 x 10watts 2 feet long powder coated white batten type all prewired including LED tube and connection with twin core flexible PVC 0.5 Sqmm complete all as specified and directed. Make- Havells/Wipro/Crompton /Luker. |
| 168 | Removing existing Unserviceable surface mounting light fittings CFL 36 watt type and supply and fix surface mounting LED light fittings 1 x 33 / 36 watts LED panel system efficiency 36 W LED 6500 K model suitable for armstrong/grid/POP false ceiling complete all as specified and directed. Make : Havells/Wipro/Crompton/Luker |
| 169 | Removing existing Unserviceable recess mounting light fittings CFL 36 watt type and supply and fix recess mounting LED light fittings 1 x 33 / 36 watts LED panel system efficiency 36 W LED 6500 K model suitable for fitting in false ceiling complete all as specified and directed. Make : Havells/Wipro/Crompton/Luker |
| 170 | Supply and fix inreplacement 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN of 32 A and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make:L&T/Legrand/Havells |
| 171 | Supply and fix in replacement of MCB/RCCB 240V,50Hz,AC with rupturing capacity 10kA of the MCB SP 6A-32 A f capacities complete all as specified and directed. Make- Havells/Legrand/ABB. |
| 172 | All as per Item No 172 but RCCB Double pole 40A, 30mA complete all as specified and directed. |
| 173 | S&F LED driver for recess/surface mounted 33/36 w LED panel system efficiency 90lm/W etc complete as per sample complete all as specified and as directed.Make:Luker/ABB/Legrand/Havells |
| 174 | S&F in repairs LED bulk head fittings 12/15 watts with opal diffuser complete all as specified and directed Make :Havells/Wipro/Crompton |
| 175 | S&F in repairs building security light LED 20 watts complete with GI brackets not less than 1.2 Mtr made out of medium grade GI tubing complete all as specified and directed Make : Havells/Wipro/Crompton |
| 176 | Supply and fix in repair 9 Watt LED bulb pin type ,White/Warm white colour complete all as specified and as directed, Make:Goldmedal/Wipro/Havells/Crompton |
| 177 | Supply and fix in repair 9 Watt LED bulb thread type ,White/Warm white light complete all as specified and as directed. Make:Goldmedal/Wipro/Havells/Crompton |
| 178 | S&F In repair of outdoor LED garden light(Focus light)/Wall Spot light ,White/Warm white light with spike stand of capacity 3 W complete all as specified and as directed. |
| 179 | S&F in replacement of LED 9W/10W White/Warm white light square/Round type fitting complete all as specified and directed. make :Havells LHEBAEP61Z1W009 or GL92338 or Crompton/Phillips Note: Suitable for Surface or Recess mounted |
| 180 | S&F in replacement of Galaktic Smart LED Strip 24W 5m with LED Driver complete all as specified and directed.Make Havells LHEHCNP1ND1W015 or equivalent in Crompton/Phillips/Luker/Bajaj/Wipro/Shakti. |
| 181 | S&F in replacement of 3 module modular white cover plate with support frames complete all as specified and directed.Make: Legrand My link or equivalent of Indo Asian/SSK/Anchor |
| 182 | S&F in replacement of 3 module modular metal flush box complete all as specified and directed.Make: Legrand My link or equivalent of Indo Asian/SSK/Anchor |
| 183 | S&F in replacement of 4 module modular white cover plate with support frames complete all as specified and directed.Make: Legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 184 | S&F in replacement of 4 module modular metal flush box complete all as specified and directed.Make: Legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 185 | S&F in replacement of 6 module modular white cover plate with support frames complete all as specified and directed.Make: Legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 186 | S&F in replacement of 6 module modular metal flush box complete all as specified and directed.Make: Legrand Mylink or equivalent of Indo Asian/SSK/Anchor |
| 187 | S&F in replacement of 8 module modular white cover plate with support frames complete all as specified and directed.Make: Legrand Mylink or equivalent of Indo Asian/SSK/Anchor. |
| 188 | S&F in replacement of 8 module modular metal flush box complete all as specified and directed.Make: Legrand Mylink or equivalent of Indo Asian/SSK/Anchor. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender