Tender For Zone-1 Chhatta, Ward No. 58: Hot-Mix (Asphalt) Paving, Drains, And Interlocking Tiles From Kalindi Vihar 80-Foot Road To The Radhapuram Gate.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Nov 2026
13 days left
EMD
1.25 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Zone-1 Chhatta, Ward No. 58: Hot-Mix (Asphalt) Paving, Drains, And Interlocking Tiles From Kalindi Vihar 80-Foot Road To The Radhapuram Gate.
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4 {Chapter No.20 Si No.16} |
| 2 | Earth work in Cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required lavels and slops and also including 1.5 m lift and 30 m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge etc. all complete. (20-Chapter PWD.SCH.No.253(a)) |
| 3 | Earth work in Excavation in foundation in ordinary soil (loam, clay or sand) including, lift up to 1.50 m and lead up to 30m and including filling watering and ramming of excavated the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge up to a distance of 30 M form the foundation trenches. (Rate including Royalty of earth also) (4-Chapter S.I.NO.- 251) |
| 4 | Cartage of Malva, Silt, sludge kankar and other disposable organic material etc. all complete with labour T&P including cartage of 8 km. (Chapter No.3 Si.No.8) |
| 5 | Providing and laying Cement Concrete in 1:5:10 (1 cement :5 fine sand 10 Stone ballast 40 mm gauges) and curing complete, including cost of form work in foundation and floors. (5-Chapter Sr.No.1) |
| 6 | Class-150 Brick Work in 1:4 Cement and Coarse Sand, mortar in foundation and plinth including supply of all materials, labor and tools and plants, etc. Required for proper completion of the work. ( Chapter No. 06 Sr.No. 2) |
| 7 | 12mm thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not excluding 80mm in girth and finished even and smooth. No extra for mixing any additive.(c) 1 Cement : 4 Coarse sand.(Chapter No.13 Si.No.2) |
| 8 | Providing and laying 45mm - 63mm gauge stone ballast with consolidation and rolling etc. All complete. (Non Scheduled) |
| 9 | Providing and Stacking 22.40-53mm guage stone aggregates of specific sizes to water bound macadam specification including etc all complete.(NS) |
| 10 | Supply and Laying stone dust etc all complete. |
| 11 | Consolidation/Compaction of stone ballast 10cm thick (loose) coat including repairing of patches picking up to old surface spreading, ballast making medhies to retain water and carriage of metal upto 30m carriage of water upto 200m maintenance of barriers and all labour T&P including road roller charges etc. required for proper completion of work the stone ballast is to be supplied to the contractor free of cost at site. |
| 12 | Supply & fixing of pre-cast M-30 cement concrete RUBBER MOLD INTERLOCKING TILES over 40mm thick local sand bed, with 3mm thick joints filled with local sand including leveling, tempering and sweeping etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. 80mm thick, Strength should not less than M-30. (tiles I shape decided by Engineer-in-charge with ISI Mark) (Chater No. 20 Si.No.14E) |
| 13 | Providing & Applying Primer Coat with bitumen emulsion on prepared surface of granular base including cleaning of road surface and spreading primer at the rate of 0.70 Kg./Sqm. Using machanical means. Before Applying prime coat. the surface will be cleaned with Mechanical broom and water will also be sprinkled with water tanker to keep the surface Moist. The Prime Coat will be applied 24 hrsbefore the application of bituminous course including all Taxes, Material, Labour, T&P etc required for proper completion of the work. |
| 14 | Providing & Applying Tack Coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30Kg/Sqm. On the prepared primed granular/old painted surface. Cleaned with air compressor. Including all Taxes, Material, Labour, T&P etc required for proper completion of the work. (For Bituminous Surface). (Chapter No.20 Si No.9) |
| 15 | Providing & Laying 5cm. thick B.M. Laying by paver finisher bitumen of the @3.4%kg by weight and stone grit etc. all complete. (20-Chapter Analysis rate) |
| 16 | Providing & Laying 2.5cm. thick S.D.B.C. Laying by paver finisher bitumen of the 5% by weight etc. all complete. (20-Chapter Analysis rate) |
| 17 | Road Marking with Hot Applied Thermoplastic Compound with Reflectrosing Glass Beads on Bituminous Surface.Providing & Laying of hot applied thermoplastic compound 2.5mm thick including reflecto rising glass beads @ 250gm/Sqm. Area, thickness of 2.5mm is exclusive of surface applied glass, beads as per I.R.C. 35. The finish surface to be level uniform and free form steaks and holes composition of thermoplastic material shall be as per table 800-3 of clause 803 of MORTH including cost of work as per direction E/IC. (Chapter-28 Si.No.2) |
| 18 | Supply & Fixing Granite Stone Work Display Board (Size 2.50ft x 4.00ft) including Painting, Lettering etc. all complete. (None Schedule) |
| 19 | Sub Total |
| 20 | Add/Deduction Rs. For Estimate Figure Amount Match |
| 21 | Grand Total Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender