Tender For Providing Various Tourist Facilities At Girijamata Mandir, Mhaismal, Dist. Chhatrapati Sambhajinagar
Tender Value
17.58 Crore
Estimated cost
Bid Submission
14 Nov 2026
6 days left
EMD
8.80 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Various Tourist Facilities At Girijamata Mandir, Mhaismal, Dist. Chhatrapati Sambhajinagar
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. (Item No. 2.11) |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.5m.) By Mechanical Means (Item No. 21.02) |
| 3 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift from 1.5m to 3.0m) By Mechanical Means (Item No. 21.04) |
| 4 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, not less than 97% of standard Proctor density after laying them in layers of 20cm. to 30cm. with Power roller. (Item No. 2.24) |
| 5 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift upto 1.50 m) By Mechanical Means (Item No. 21.06) |
| 6 | Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift from 1.5m to 3.0m.) By Mechanical Means (Item No. 21.12) |
| 7 | Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.(Lift from 1.5 to 3.0m.) By Mechanical Means (Item No. 21.08) |
| 8 | Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. (Item No. 2.25) |
| 9 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm to 20cm including watering and compaction etc. complete. (Item No. 21.37) |
| 10 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. (Item No. 21.36) |
| 11 | Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. (Item No. 21.38) |
| 12 | Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. (Item No. 11.24) |
| 13 | Spreading hard murum/soft murrum/gravel or kankar for side width complete (Item No. 2.30) |
| 14 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. (Item No. 21.36) |
| 15 | Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Item No. 21.22) |
| 16 | Providing preconstructional antitermite treatment as per I.S. 6313(Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Item No. 21.24) |
| 17 | Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for foundation and bedding/steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 24.04) |
| 18 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading-I Material (Item No. 3.01) |
| 19 | Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter ( excluding reinforcement) with coarsen and fine aggregate Using V.S.I.Quality Artifitial Sand etc.complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. |
| 20 | Stamp Concrete of 100mm Thickness-Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate(natural sand/VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant/non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM(on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg persqm. Including texturing, and covering with plastic sheet(min 200 micron thickness) and also applying two coats of UV-stable, 30 % solids clear sealer @ 150 to 250 gms persqm using surface roller and protecting from falling dust, dirt and curring by curring compound/by providing cement vata in cement Mortor 1 :8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete.(prior approval of superinteding Engineer will be necessary) (Item No. 54.05) |
| 21 | Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb without gutter(as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant (Item No. 7.02) |
| 22 | Providing and laying in situ cement concrete M-20 of trap / granite / quartzite / gneiss metal for Reinforced Cement Concrete work in foundation like raft, grillage, strip foundation and footings of Reinforced Cement Concrete columns and steel stanchion including bailing out water, formwork, compaction and finishing, curing etc. complete. (Excluding steel reinforcement and Structural steel). |
| 23 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided(Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.13) |
| 24 | Providing and laying cast in situ/Ready Mix Cement Concrete of M2O grade RCC single rim bored pile of 300mm dia. each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) by tremie arrangement compaction of concrete including chipping and dressing etc. complete.(Excluding steel reinforcement) (Item No. 22.02) |
| 25 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.31) |
| 26 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.33) |
| 27 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.50) |
| 28 | Designing, Providing, making of Column Mould (Piller) for Compound Wall having size 0.38 x 0.20 x 1.80m in Fibre Reinforced material 8 to 10mm thick with Metal (MS) support & surface coating inside and Clip fitting, FRP diy mould (farma) as directed by Engineer Incharge etc. |
| 29 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.52) |
| 30 | Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.54) |
| 31 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.17) |
| 32 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.19) |
| 33 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.70) |
| 34 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 25.72) |
| 35 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.) With fine aggregate(Crushed sand VSI Grade) (Item No. 24.16) |
| 36 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.07) |
| 37 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/quartzite/granite/gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete.(Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) (Item No. 26.26) |
| 38 | Providing and laying in situ/ready mix M-30 controlled reinforced cement concrete of trap metal for raft slab including \\"V\\" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete. concrete batch mix plant/pan mixer with fine agreegates of required specifications(VSI sand finely washed etc) etc. complete.(excluding reinforcement). a) RCC Grade with reversible drum type mixer/concrete batch mix plant(pan mixer) . (Item No. 17.34) |
| 39 | Providing and laying in situ/ready mix controlled grade of M25 of trap/granite/quartzite/gneiss metal for RCC works in cut off walls/curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete.(with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/concrete batch mix plant(pan mixer) with fine agreegates of required specifications(VSI sand finely washed etc), excluding reinforcement) (Item No. 12.59) |
| 40 | Providing and laying in situ/ready mix M30 RCC of trap/granite/quartzite/gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete.(excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/pan mixer with fine agreegates of required specifications(VSI sand finely washed etc) RCC work of Box returns (Item No. 14.44b) |
| 41 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Item No. 26.33) |
| 42 | Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Item No. 27.05) |
| 43 | Providing fly ash brick masonry with conventional/I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. (Item No. 27.12) |
| 44 | Providing fly ash brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (Item No. 27.13) |
| 45 | Providing Second class fly ash brick masonry with conventional/I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6mm diameter/two hoop iron strips 25mm x 1.60mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. (Item No. 27.14) |
| 46 | Providing and applying laying Aggregate plaster in granite/marble stones, as decorative finish to give granite/marble like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12mm thick with cement mortar 1:3 with 2% integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder, applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete. (Item No. 32.29) |
| 47 | Providing water proof bedding for flooring of Bath and WC 25mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/-including ponding test etc. complete. (Item No. 31.05) |
| 48 | Providing waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles)(As directed by Engineer in Charge) (Item No. 31.06) |
| 49 | Providing cement based water proofing treatment to terraces(Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/-including ponding test etc. complete. (Item No. 31.04) |
| 50 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (Item No. 32.04) |
| 51 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (Item No. 32.11) |
| 52 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (Item No. 32.34) |
| 53 | Providing and applying priming coat on concrete/masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (Item No. 35.21) |
| 54 | Providing and applying plaster/wall punning with plaster of paris(with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface/or on newly brick surface(Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete. (Item No. 32.30) |
| 55 | Providing and applying pearl/luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. (Item No. 35.23) |
| 56 | Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. (Item No. 32.32) |
| 57 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. (Item No. 35.25) |
| 58 | Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid(2:1) by weight covering 9 to 10 Square Metre/Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. (Item No. 31.09) |
| 59 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item number 15 to 18 prior approval of Superintending Engineer will be necessary (Item No. 35.26) |
| 60 | Providing and applying 2 Coats of 100% Pure acrylic low VOC water based paint with to withstand for period of atleast 5 years of approved make. Paint should provide durable long lasting silk finish with high resistance to UV and resistance to spreading of flame. Paint should protect against concrete carbonation with R value of minimum 600 and ability to built cracks upto min 0.7mm. The paint has to be applied on High quality water based acrylic copolymer primer with good alkali resistance properties. With all leads and lifts at all levels etc. complete, as directed by Engineer in charge. (Item No. 48.14) |
| 61 | Providing and applying 2 Coats of high quality acrylic copolymer matt approved low VOC emulsion paint of approved shadethat gives smooth, flat and washable and durable finishing of approved make. Paint should have good flow levelling property with good colour retention and incan antibacterial property. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has incan antibacterial property. The work activity should cover all aspects of applying paints from surface preparation, filling to erecting and dismantling of scaffolding, finishing the surface etc as directed by Engineer in charge. (Item No. 48.13) |
| 62 | Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. (Item No. 23.11) |
| 63 | Designing, Providing & making of Column (Piller) for Entrance Gate having size 0.38 x 0.20 x 1.80m in Fibre Reinforced material 8 to 10mm thick with Metal (MS) support & surface coating inside and Clip fitting, FRP diy mould (farma) as directed by Engineer Incharge etc. |
| 64 | Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.One Number: As directed by Engineer- in-charge.. (Item No. 23.09) |
| 65 | Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50mm, 8 gauge thick and fixed 75mm above ground level on vertical M.S. Angles of 40 x 40 x 6mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5mm size and vertical M.S. flat 35 x 5mm and 25 x 5mm horizontal including cross support of 40 x 40 x 6mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670mm including 3 coats of oil painting etc. complete. (Item No. 46.39) |
| 66 | Designing, Providing & making of LAMP GL - 28 HSN Code - 6802 for Compound Wall having size L- 12'' W- 12'' H - 20'' in Red colour with Sandstone finish including Transportation & Installation Charges as directed by Engineer Incharge etc. |
| 67 | Designing, Providing & making of Mural for Compound Wall having size 0.60 x 0.90m in Fibre Reinforced material 8 to 10mm thick with Metal (MS) support & surface coating inside and Clip fitting, FRP diy mould (farma) as directed by Engineer Incharge etc. |
| 68 | Providing and fixing of retro-reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square metre made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B(Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75mm x 75mm x 6mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B(Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. (Item No. 6.33a) |
| 69 | Providing and fixing of retro-reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 square metre made out of 4mm aluminum composite material sheet bonded with white retro reflective sheeting of Class B(Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75mm x 75mm x 6mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B(Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. (Item No. 6.34b) |
| 70 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge(1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65mm x 65mm x 6mm, 3.65m long painted with alternate black and white bands of 25cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60cm x 60cm x 75cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (Item No. 6.36) |
| 71 | Providing and fixing of retro-reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square metre made out of 4mm aluminum composite panel with 0.5mm skin thickness on either side bonded with white retro reflective sheeting of Class C(Type XI Type XI Micro prismatic grade sheeting) having pressure sensitive adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75mm x 75mm x 6mm, 3.5 mt ~ 3.9 mtlong firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25cm width including fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class C(Type XI Micro prismatic grade sheeting)) sheeting shall have 10 years written warranty from the manufacturer including the Digitally Printed areas with approved printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate along with sheeting manufacturer attested 3 years outdoor weathering test report from Indian govt lab must be submitted to the Engineer in charge by the contractor/supplier. (Item No. 53.79) |
| 72 | Providing and fixing of retro-reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 square metre made out of 4mm aluminum composite panel bonded with 0.5mm skin thickness on either side with white retro reflective sheeting of Class C(Type XI Type XI Micro prismatic grade sheeting) having pressure sensitive adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75mm x 75mm x 6mm, 3.5 mt ~ 3.9 mtlong firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25cm width including fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. ClassC_(Type XI Type XI Micro prismatic grade sheeting) sheeting shall have 10 years written warranty from the manufacturer including the Digitally Printed areas with approved printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate along with sheeting manufacturer attested 3 years outdoor weathering test report from Indian govt lab must be submitted to the Engineer in charge by the contractor/supplier. (Item No. 53.81) |
| 73 | Providing and constructing Columns ,footing & steel including Design supply fabrication & erection Tensile structure Roof with Fabric of 900 Gsm both side Coated with PVDF Lacquer System on both sides,titanium dioxide front side primer,low-wick,protected aginst microbial and fungal attack,UV- protected top caot of type 2 grade of required colour and shap and design including necessary M.S.tensile steel structure of hollow section,gusset plates bolts nuts,screws etc. complete with one coat of epoxy primer and two caot epoxy paint etc.all complete as specified and approved by architect the complete structrual structure Designed to withstand the wind pressure as per IS (PART III), to accmmodate thermal expansion and seismic movement etc The rate shall include all design calculations, engineering and slope drawing Including approval from cometent structural designer,Labour T &P scaffolding other incidental charges including wastage enabling temporary service all fitting fixtures complete as per technical specfication .for the purpose of Payment actual surafce area of fabric shall measured etc. |
| 74 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface-Providing and laying of hotapplied thermoplastic compound2.5mm thick including reflectorizing glassbeads@250gms pers qmarea,thickness of 2.5mm isexclusive of surface applied glassbeads asper IRC:35.The finished surface to be level, uniform and free from streaks and holes.complete. |
| 75 | Providing and Fixing mat finish stainle s s steel (of302grade)railing with top pipe of 50mmdia. and vertical pipe of 38mm dia at0.60mc/coras required and horizontal pipes of 25mm dia in three rows,allpipes of 2mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ballbase of 75mmdia above newel post of 75mm dia meter etc.complete (Prior approval of sample and br and by Ex.Engineer is necessary before use). |
| 76 | Providing and laying vitrified rustic matt stone finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. (Item No. 33.44) |
| 77 | Providing and laying vitrified rustic matt stone finish tiles having size 590mm to 605mm x 590mm to 605mm to 8 to 10mm thickness and confirming to IS. 15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete. (Item No. 33.45) |
| 78 | Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. (Item No. 33.40) |
| 79 | Providing and laying vitrified mirror/glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS. 15622-2006(group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (Item No. 33.41) |
| 80 | Providing and laying in position flooring of telephone black/Amba White/Cat bary brown/Ruby red/Ocean Brown granite stone of approved shade and size 18mm to 20mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. (Item No. 33.34) |
| 81 | Providing and fixing machine cut machine polished 18mm to 20mm thick telephone black/Amba White/Cat bary brown/RBI red/Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. (Item No. 33.35) |
| 82 | Providing and laying telephone black/Amba White/Cadburybrown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. (Item No. 33.68) |
| 83 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30cm x 30cm and confirming to IS 15622-2006(Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (Item No. 33.67) |
| 84 | Providing and laying ceramic tiles having size 30cm. x 60cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. complete. (Item No. 33.27) |
| 85 | Providing and fixing frame with/without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete (Item No. 39.01) |
| 86 | Providing and fixing frame with/without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. (Item No. 39.02) |
| 87 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete (Item No. 39.08) |
| 88 | Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Item No. 39.09) |
| 89 | Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom rails and two 19x 19mm MS tubes inserted horizontally inside the hollow profile section using 4/5mm sheet using screws hollow profile shall be lipped with 10mm(5mm x2) thick x 20mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain/prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. (Item No. 39.82) |
| 90 | Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40Kilogrameach complete as per drawings and Technical specifications etc. complete.(boulder laid without wire crates) (Item No. 14.69) |
| 91 | Providing and laying weep holes of 100mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete. (Item No. 17.37) |
| 92 | Providing trap Ashlar fine Stone Pavement (0.30 x 0.45 x 0.15 ) of two stone pavement second sort including chiselling, cutting, dressingof stone for pathway in lime/cement mortor 1:1 prop. Over bedding of lime concrete and curing & filling black cotton soil in the gap of two stone pavement properly etc. complete. Corner facing stones shall be dressed on face and top. |
| 93 | Providing dry rubble stone pitching 23cm(about9)thick including all material,quarry spalls, labour etc. complete. |
| 94 | Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m24 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm25 Mean Breaking Stress for welded corner(a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2(b) For the compression bending test Shall not be < 30N/mm26 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %7 Surface Spread of flame BS : 476 - Part 7 Classification 18 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable9 Tensile modulus ASTM D 638 Shall not be < 35 MPa10 Shear Modulus ASTM D 732 Shall not be < 220 MPa11 Tensile Strength EN ISO 527 Shall not be < 30 MPaAll corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. B) 3 Track 3 / 6 Sash (Big Series) window frame of size 122 x 54 mm & Sash of size 64 x 47 mm |
| 95 | Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38mm x 1.22mm box type, 5mm thick sheet glass louvers, of approved quality etc. complete. (Item No. 39.68) |
| 96 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Item No. 40.01) |
| 97 | Providing and fixing 40mm diameter and 1.5mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete (Item No. 40.06) |
| 98 | Providing and fixing 45cm wide mild steel ladder of 40mm x 6mm mild steel flat stringers and steps of 18mm dia. mild steel bar for water tank including fixing it in(1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete.(Anti Corossive Paint) (Item No. 41.56) |
| 99 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. (Item No. 42.02) |
| 100 | Providing and fixing 100mm dia stabiliser pipe/P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (Item No. 42.52) |
| 101 | Providing and fixing 20mm dia. screw down bib/stop tap of brass including necessary socket union nut complete. (Item No. 41.41) |
| 102 | Providing and fixing screw down for 20mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. (Item No. 41.44) |
| 103 | Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/union nut etc. complete as directed by Engineer in charge. (Item No. 48.27) |
| 104 | Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. (Item No. 41.80) |
| 105 | Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (Item No. 42.85) |
| 106 | Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20, 000 litres (Item No. 42.54) |
| 107 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. (Item No. 42.20) |
| 108 | Providing and fixing orissa type colour glazed earthenware 625 x 450mm. w.c. pan including trap, C.I. soil and vent pipe upto the out side face of wall including 100mm. dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete. (Item No. 42.35) |
| 109 | Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall, 100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. (Item No. 42.86) |
| 110 | Providing and fixing white glazed urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware/Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.(Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) (Item No. 48.31) |
| 111 | Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black/coloured granite of 180mm thick stone black kadappa framework including chromium plated coupling bottle-Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete.(Counter size 1.20m x 0.60 m) (Item No. 42.88) |
| 112 | Providing and fixing on walls/ceiling/floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.55) |
| 113 | Providing and fixing on walls/ceiling/floor 20mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.56) |
| 114 | Providing and fixing on walls/ceiling/floor 25mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.57) |
| 115 | Providing and fixing on walls/ceiling/floor 32mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.58) |
| 116 | Providing and fixing on walls/ceiling/floor 40mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (Item No. 42.59) |
| 117 | Providing and fixing on walls/ceiling/floor 50mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. (Item No. 42.60) |
| 118 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogramwith lid and frame fixed in cement concrete. (Item No. 42.10) |
| 119 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75Kilogramwith lid and frame fixed in cement concrete. (Item No. 42.11) |
| 120 | Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary(including excavation and laying) (Item No. 42.18) |
| 121 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. (Item No. 42.19) |
| 122 | Providing and fixing 20mm diameter water meter with non-return valve including strainer, sockets/union nut including water meter box making locking arrangement and lock.(without chamber). (Item No. 41.27) |
| 123 | Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete. (Item No. 33.23) |
| 124 | Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Item No. 42.07) |
| 125 | Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Item No. 42.09) |
| 126 | Providing and installing bio digester unit based on DRDO technology made of fibre reinforced plastic(FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester. Percentage of fibre glass(glass content in fibre glass should be minimum 30%):-33.33% Percentage of polyester resin:-66.67% Water absorption(as per ASTM):-0.30% Flammability as per ASTM Tensile strength:-115 MPA Specific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2 Heat defection/distort temperature:-65deg C Corrosion resistance(Non Corrosive) fitted with Inlet pipe size rigid PVC:-100mm Outlet pipe size rigid PVC:-80mm Gas outlet rigid PVC with Valve: 20mm Bacteria immobilization PVC mattes(on all partition) With DRDO TOT licensee and latest batch certificate(month & year of supply) and capacity as below :: j) Up to 300 user size(4.8mx2.0mx1.25m), Capacity of Biodigester:-12000 liters, Area of top, bottom and side walls:-36.20 sq.m, Area of partition walls: 10.00sq.m, Total weight of FRP:-593.28 Kilogram, Bacteria inoculums quantity:-4200 liters, Minimum thickness of side walls/top and bottom: 8mm, number of inside partitions:-4, Minimum thickness of partition wall: 4mm (Item No. 51.112j) |
| 127 | Providing and constructing granite kitchen platform with fixing of stainless steel sink 600mm x 450mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30mm thick supports with kadappah top 35 to 40mm thick and polished granite 16 to 20mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15cm height and top granite of 75 x 40cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.(Platform top size 5.00m x 0.60m and height is 0.75 m) (Item No. 41.78) |
| 128 | Designing (aesthetically), and constructing RCC groundservice reservoirs / RCC sumps in M-300 mix of requiredcapacity including excavation in all types of strata,foundation concrete, container walls, bottom slab top RCCroof slab / or dome, 20 mm thick cement plaster with waterproofing compound in CM 1:3 proportion to inside face ofthe container, including epoxy paint from insideincluding refilling and disposing of surplus stuff withinlead of 50 M, all labour and material charges, for layingand jointing of pipe assembly for inlet, outlet washout,over flow and bypass arrangement consisting of C.I. M.S.D/F. pipes, specials and valves of given diameters,providing and fixing accessories such as M.S. ladder insideand outside, C.I. Manhole frame and cover, water top slab,B.B. masonry chamber for all valves, ventilating shafts,including giving satisfactory hydraulic test and watertightness test as per IS code and providing three coats ofcement paints to all exposed surface of structure includingroof surface etc. complete as per design data, criteria,obligatory requirements and detailed specifications. Antitermitetreatment shall be given for underground portion ofthe structure.Notes 1) The design shall be in accordance with variousrelevant I.S. specification (I.S. 456/1978, I.S. 875-1987,I.S. 3370 -1965 or revised.) 2) Only M.S. bars grade I conforming to I.S. 432 part-I orhigh yield strength deformed bars conforming to I.S. 1786or I.S. 1139 shall be used.Grade-II M.S. bars shall not beused.3) Entire structure shall be in M-300 only.4) The scope of pipe assembly work shall be upto 5 metrebeyond outside face of the wall, cost of pipes valves andspecials is not included in the rate but labour cost forlaying and jointing is included.5)The G.S.R. / Sump above 15 lakh litres capacityshall be in two compartment.6) The Job includes designing the structure for upliftpressure and dewatering if required during entire executionand disposal of surplus excavated stuff within lead of 50metres as directed by Engineer-in-charge.If upliftsconsidered in design, then these rates shall beincreased by 7.5%.7) G.S.R. outlets shall be with bell mouth of approvedpattern in bottom slab and cost of designing bell mouth isincluded in the rate. Sump well includes cost of suction pitrequired at bottom.8) For pipe diameters upto 300 mm only CI pipes and CIspecials shall be used. For pipe diameters above 300 mm,M.S. pipes and specials minimum 10 mm thick shall beused with proper anticorrosive epoxy treatment frominside and outside.9) Cost of pump house is not included in theserates.10) Above rates are applicable for Seismic Zones 2,3 and 4.11) 75% part rate shall be payable for reinforcement,concrete and plastering items of all types of G.S.R.s andsumps till satisfactory hydraulic testing for water tightnesstest is given in complete Note : Conditions from Sr. No. 1 to 11 shall form a partand parcel of tender and must be included in the drafttender papers for work of R.C.C. GSRs and sumps. |
| 129 | Providing and fixing on walls/ceiling/floors,80mmdia.heavy grade having embossed as ISI Mark galvanised iron pipes weight of 10.15Kilogram/meter with necessary fittings.and remaking good thedemolished portion and applying primer of anti-corrosive oil paint 2coats Including necessary scaffolding and removing existing pipelinei fnecessary and conveying and stacking the same in PWD chowky or as directed etc.complete. |
| 130 | Providing and fixing 80mmdia meter water meter with non-return valve including strainer,sockets/un ionn ut and including watermeter boxmaking lock ingarrangement and lock.[Without chamber]. |
| 131 | Providing and fixing screw down for 80mm.dia.wheeled stop ta po fbrass including necessary sockets/union nut complete. |
| 132 | Providing & fixing Wardrobe for overall size 1200 X 600 X 2400 mm height with made up of CENTURY / GREENPLY MAKE commercial PLY BWR grade ply. (ISI 303) MARK or equivalent with 19mm & 12mm ply used for approved drawing including TEAK WOOD FRAME & TEAK WOOD LEGS with rubber bushes and finished with 3-4 mm thick VENEER & 1mm thick FABRIC laminate ROYAL TOUCH/GREENLAM confirming to (ISI 2046) or equivalent make premium quality in approved design and groves, with MELAMINE/PU POLISH for required surfaces with overall ANTITERMITE TREATMENT done as directed by engineer in charge / Architect etc complete. |
| 133 | Providing & Arrangemnt of High Back Chair-TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. (Item No. 51.41) |
| 134 | Providing & Arrangemnt of Mid Back, ECO CTS Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery (Item No. 51.43) |
| 135 | Tea Table 900mm X 750mm X 450mm form.s. ante chamber Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. (Item No. 51.54) |
| 136 | Providing and fixing in position double bed of size 2000mmX 1800mm X450mm with made up of CENTURY / GREENPLY MAKE commercial PLY BWR grade ply. (ISI 303) MARK or equivalent with 18mm ply used for approved drawing and finished with 1mm thick laminate ROYAL TOUCH/GREEN LAM confirming to (ISI 2046) or equivalent make premium quality in approved design and groves, as directed by engineer in charge / Architect etc. complete.. |
| 137 | Providing and supplying double & single bed-sheets ,pillow covers for two pillows as per architects drawing and make approved as directed by engineer incharge etc.complete |
| 138 | Wardrobe with Mirror @ 900LX 600DX 1965H Providing and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides.(18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450(D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. (Item No. 51.57) |
| 139 | Providing & fixing Wardrobe for overall size 2775 X 600 X 2400 mm height with made up of CENTURY / GREENPLY MAKE commercial PLY BWR grade ply. (ISI 303) MARK or equivalent with 19mm & 12mm ply used for approved drawing including TEAK WOOD FRAME & TEAK WOOD LEGS with rubber bushes and finished with 3-4 mm thick VENEER & 1mm thick FABRIC laminate ROYAL TOUCH/GREENLAM confirming to (ISI 2046) or equivalent make premium quality in approved design and groves, with MELAMINE/PU POLISH for required surfaces with overall ANTITERMITE TREATMENT done as directed by engineer in charge / Architect etc complete. |
| 140 | Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5(cms) Breadth(cms): 100(cms)Height(cms): 100(cms) Weight(Kilograms): 66(Kilogram) Seating Capacity: Five Seat (Item No. 51.53) |
| 141 | Bed Side Table @ 400LX 400DX 415H Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding (Item No. 51.58) |
| 142 | Executive's Table @ 1800Lx900Dx750HT Providing & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water falledg es & curved panel & Decorated Anodized section MODES TY PANEL to bemade of 18mm thick Prela minated particle board with PVC edge band as per drawing |
| 143 | GARDEN SOIL-Supplying on site garden soil well sieved 80% to pass through I. S. sieve of 10mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box.(Farma) Item includes Transporting, loading -unloading etc.(Lead charges per 15 km. considered. Excluding Royalty) |
| 144 | Preparing lawn (20 cm depth): Excavating the ground to a required depth of 20cm removing & coveying unwanted stuff to a required distance as directed filling fresh garden soil / silt & mannure in excavated area in 3:1 proportion to a height of 20cms mixing garden soil and manure thoroughly well, levelling , watering on previous night, planting required variety of lawn grass as directed and maintaing till well established by watering, weeding, clipping, rolling, etc. complete. |
| 145 | Planting small and medium size ornamental / Flowering Plant :- Digging pit with size 0.6 m X 0.6 m X0.6 m, removing and conveying unwanted stuff to arequired distance as directed. Filling the pit with fresh garden soil and Farm Yard Manure upto a height of 0.6 m in 3:1 Proportion. Mixing soil and manure thoroughly, well levelling, watering on previous night. Planting one to two year old healthy plant saplings as per specifications. Maintaining till well established by watering, stirring, of soil and manure, replacing casualties, etc. complete..... |
| 146 | Excavation pit size 1.00 x1.00 x 1.00m for planting large flowering/ shady trees (plant height 2 to 4 mtr.)/ palm varieties of height (plant height 2 to 4 mtr.) in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs. |
| 147 | Excavation pit size 0.30 x 0.30 x 0.30m for planting rose plants/ climbers/ creepers in earth, soil of all types, soft murum, including removing the excavated & unwanted material up to a required distance of 50 mtrs |
| 148 | Mogra Plant / creepers / climber : excavating pit with size 0.3m x 0.3m x 0.3m removing land covveying unwanted stuff to a required distance as directed filling the pit with approved excavated material upto a height of 0.15 mtr. And remaining height of 0.15mtr with fresh garden soil and manurein 3:1 proportion. mixing soil and manure thoroughly well levelling, watering on previous night planting one or two year old healthy plant as per specification.maintaing till well established by watering, weeding ,prunning,stirring,replacing,casualties, etc. complete. |
| 149 | Providing and fixing in position children playing equipments as listed belowd)Vip Bench. |
| 150 | Providing and fixing in position children playing equipments as listed belowe)Multi Activity Play System(M.A.P.S.-T24) |
| 151 | Providing and fixing in position children playing equipments as listed below a)Multi seater see-saw |
| 152 | Providing and fixing in position children playing equipments as listed below Circular swing |
| 153 | Providing and fixing in position children playing equipments as listed below c)Mini wave slide |
| 154 | Providing & Fixing allaccessories a shaded benches etc |
| 155 | Providing & fixing tera felt APP ( Atactic Poly-prolene) Gobain make underlay membrane of approximate 2mm thick below single fixed by sufficient rust free nails on existing concrete plain/ slopping roof including all materials, transportation, labour and scaffolding etc. complete as per instructions of engineer incharge/ Architect etc. complete. |
| 156 | Providing & fixing the Roofing Shingles of Saint- Gobain make composites of reinforced fiber glass and minerals stabilized, high grade asphalt. They are overlaid with high strength ceramic coated granules, below which is mineral stabilizer cum fibre retardant coating. The entire composition comes in the form of mats. A sheet of singles has thickness of 8mm to 9mm and size as per the requirement. The profile pattern & colour shall be as per approval drawing and it should be got approved before fixing from the Engineer in charge/Architect. The roofing should be 100% water proof and resistance of all impact forces wind & fire also unbreakable. These are maintance free contractor has to exercise given minimum 25 year warranty band on the Rs. 500 Stamp paper if any damage free repair should have been done by the contractor. The shingles should be laid on R.C.C plain slabs/ slopping. The roof subtract that it can be include steep slopes fixing of singles including starter of size 4’ x 4” and fixed by sufficient rust free nails if required silicon shall be used on the existing concrete roof including transportation, scaffolding, lifting all material etc. as directed by Engineer in charge/ Architect etc. complete. |
| 157 | Providing & fixing Ridge accessories colour match with the Roofing Shingles of Saint- Gobain make composites of reinforced fiber glass and minerals stabilized, high grade asphalt. They are overlaid with high strength ceramic coated granules, below which is mineral stabilizer cum fibre retardant coating. The entire composition comes in the form of mats. A sheet of singles has thickness of 8mm to 9mm and size as per the requirement. The profile pattern & colour shall be as per approval drawing and it should be got approved before fixing from the Engineer in charge/Architect. The roofing should be 100% water proof and resistance of all impact forces wind & fire also unbreakable. These are maintance free contractor has to exercise given minimum 25 year warranty band on the Rs. 500 Stamp paper if any damage free repair should have been done by the contractor. The shingles should be laid on R.C.C plain slabs/ slopping. The roof subtract that it can be include steep slopes fixing of singles and fixed by sufficient rust free nails if required silicon shall be used on the existing concrete roof including transportation, scaffolding, lifting all material etc. as directed by Engineer in charge/ Architect etc. complete. |
| 158 | 5 (b) Flowering TreesSpecification:- Minimum Girth 5 to 7 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves , with clear tunk,healthy condition Free from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged.1.Bahva (Amaltash)2.bakul tree 3.Gulmohar 4.Kadamb 5.sita ashok tree 6.palash tree 7.Tabebuia 8.Kanchan tree etc |
| 159 | 6 (c) Foliage TreesSpecification:- Minimum Girth 8 to 10 c.m. Minimum 5 to 6 Branches with Maximum number of Leaves ,clear trunk, well Developed Canopy,Healthy conditionFree from pest and diseases,well seteled in appropriate size of Plybag,uniform in size and root system are undamaged.1Alstonia/Satvin 2.Arjuna 3.Deshi Badam 4.Filicium/Fern Tree 5.KaduNeem 6.Karanj 7.Peepal 8.Wad/banyan 9.Silver Oak etc |
| 160 | Providing and fixing best quality 950 high GRC railing as per drawing with baluster which made out of 50 mm diameter and 16 gauge pipe fitted firmly by means of resin anchors and concealed cover. Handrail will be of 50 mm diameter and 16 gauge pipe having 12 mm daimeter rods passing through 16 mm diameter bush will be used as infill baluster position at time of installation will be changed depending upon the site condition and siuation etc. complete design of railing shall be as directed by Engineer in charge. |
| 161 | Providing and fixing Monkey,Penguine,Rabbit Dust Bin (4 feet) Dimension Height 1.2 m Daimeter-Dai0.7 m Spec:-FRP dust bin is made from highly strength FRP Material in attractive colours Completed as directed by Engineer In Charge. |
| 162 | Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 163 | Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 164 | Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. |
| 165 | Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 166 | Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit |
| 167 | Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 Kv |
| 168 | Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 169 | Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 170 | Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 171 | Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 172 | Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 173 | Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 174 | Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/ inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 175 | Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/ inside pole/Bus bars or any other places. as per specification No: WG-MA/BW |
| 176 | Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 177 | Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 178 | Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. |
| 179 | Supplying and erecting modular type 32A, DP key tag switch with key tag, duly erected on provided plate and box with wiring connections complete. |
| 180 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 181 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 182 | Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete. |
| 183 | Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-11 as per specification No. WG-TW |
| 184 | Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 185 | Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW |
| 186 | Supplying & erecting 10 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW |
| 187 | Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW |
| 188 | Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 16 extension complete. |
| 189 | Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete. |
| 190 | Supplying, installing, testing & commissioning IP telephone instrument as per specification complete. |
| 191 | Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. |
| 192 | Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden/ sunmica board. |
| 193 | Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. |
| 194 | Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF |
| 195 | Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF |
| 196 | Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. |
| 197 | Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. |
| 198 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 199 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 200 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 201 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 202 | Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW |
| 203 | Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW |
| 204 | Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW |
| 205 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW/CW |
| 206 | Supplying and erecting LED COB Downlight with reflector circular Max. 8W Operating Temperature 10℃ to 40℃,Rated Input Voltage & Frequency 220-240 VAC, 50Hz,THD <15% Rated Luminous Flux 560 lm / 520 lm / 480 lm (tolerance as per BIS),Rated Luminaire Efficacy 70 lm/W / 65 lm/W / 60 lm/W (tolerance as per BIS) Correlated Color Temperature (CCT) 6500 K / 4000 K / 3000 K (tolerance as per ANSI) Beam Angle 36°, colour rendering index CRI>90, Driver Efficiency ≥80% LED Life Span >50000 Hrs Housing Die Cast Aluminium with White Powder Coating Lens / Reflector Anodized Reflector Mounting Recess Over Voltage Protection Withstand upto 440V/AC for 4 Hrs Surge Protection ±4.0KV Protection Class Class II Ingress Protection IP20, Impact protection IK02, Provided Short Circuit Protection , Open Circuit Protection, Reverse Polarity Protection Engineer incharge |
| 207 | Supplying and erecting LED COB Downlight with reflector circular Max. 12W Operating Temperature 10℃ to 40℃,Rated Input Voltage & Frequency 220-240 VAC, 50Hz,THD <15% Rated Luminous Flux 720 lm / 685 lm / 65 lm (tolerance as per BIS),Rated Luminaire Efficacy 60 lm/W / 57 lm/W / 55 lm/W (tolerance as per BIS) Correlated Color Temperature (CCT) 6500 K / 4000 K / 3000 K (tolerance as per ANSI) Beam Angle 30°, colour rendering index CRI>90, Driver Efficiency ≥80% LED Life Span >50000 Hrs Housing Die Cast Aluminium with White Powder Coating Lens / Reflector Anodized Reflector Mounting Recess Over Voltage Protection Withstand upto 440V/AC for 4 Hrs Surge Protection ±4.0KV Protection Class Class II Ingress Protection IP20, Impact protection IK02, Provided Short Circuit Protection , Open Circuit Protection, Reverse Polarity Protection Engineer incharge |
| 208 | Supplying and erecting LED COB Downlight with reflector circular Max. 15W Operating Temperature 10℃ to 40℃,Rated Input Voltage & Frequency 220-240 VAC, 50Hz,THD <15% Rated Luminous Flux 1125 lm / 1050 lm / 975 lm (tolerance as per BIS),Rated Luminaire Efficacy 75 lm/W /70 lm/W / 65 lm/W (tolerance as per BIS) Correlated Color Temperature (CCT) 6500 K / 4000 K / 3000 K (tolerance as per ANSI) Beam Angle 45°, colour rendering index CRI>90, Driver Efficiency ≥80% LED Life Span >50000 Hrs Housing Die Cast Aluminium with White Powder Coating Lens / Reflector Anodized Reflector Mounting Recess Over Voltage Protection Withstand upto 440V/AC for 4 Hrs Surge Protection ±4.0KV Protection Class Class II Ingress Protection IP20, Impact protection IK02, Provided Short Circuit Protection , Open Circuit Protection, Reverse Polarity Protection Engineer incharge |
| 209 | Supplying and erecting LED COB Downlight with reflector circular Max. 20W Operating Temperature 10℃ to 40, Rated Input Voltage & Frequency 230 VAC, 50Hz,THD <15% Rated Luminous Flux 1710 lm / 1620 lm / 1530 lm (tolerance as per BIS),Rated Luminaire Efficacy 95 lm/W / 90 lm/W / 85 lm/W (tolerance as per BIS) Correlated Color Temperature (CCT) 6500 K / 4000 K / 3000 K (tolerance as per ANSI) Beam Angle 38° Driver Efficiency ≥85% LED Life Span >50000 Hrs Housing Die Cast Aluminium with White Powder Coating Lens / Reflector Anodized Reflector Mounting Recess Over Voltage Protection Withstand upto 440V/AC for 4 Hrs Surge Protection ±4.0KV Protection Class Class II Ingress Protection IP20 Provided Short Circuit Protection , Open Circuit Protection ,Reverse Polarity Protection etc complete |
| 210 | Supplying and errecting of high quality Static White Circular Inground LED Light having precies symmetrical beam as per design or site requirement suitable for façade lighting applications. Housing to be made of die-cast Aluminium with excellent heat management system to ensure proper heat dissipation and thermal stability of the luminaire. The luminaire shall have corrossion resistance powder coating finish and Stainless Steel (SS 316) frame on top and should have tilting arrangement. Luminaire shall be suitable to operate in a temperature range of -10°C to 50°C, LED life should be at least 50,000 burning hours at L70 at 25°C. The lens shall be made of anti-aging & anti UV-PMMA/PC material and able to minimize hot spots to insure proper light distribution. Suitable for outdoor weather proof conditions having IP67 ingress protection. Toughened glass having impact resistance protection of IK09. The luminaire shall have system wattage 24W and system lumen output of not less than 1850 lumens, Beam angle should be symmetrical 15/20/36/45 degree/As per site condition, The fixture shall have input voltage of 240V AC with integral driver or 24V DC, provided with external high efficiency Driver operating on 240V AC, Power factor >0.90, internal Surge protection 4KV and other protections including OCP, OVP, SCP, OTP shall be provided in the driver. Luminaire complying to BIS standard \\"IS 10322\\" ,Color Temperature : 3000K, CRI>80, Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%, LED Makes should be CREE, LumilLED, Osram, Nichia, Bridgelux to insure higher lumen output and brightness with SMD LED chips. The manufacturer should have internal testing equipment’s especial 2m Integrating Sphere, IPX6, IK10, Humidity Chamber. The manufacturere shall submit the LM79 & LM 80 report along with the supply of material along with the BIS certificate.. |
| 211 | Supplying and errecting of high quality Static White (3000K) Window Trick Light having precies beam angle as per design or site requirement suitable for façade lighting applications. Housing to be made of pressure die-cast Aluminium with excellent heat management system to ensure proper heat dissipation and thermal stability of the luminaire. The luminaire shall have electrostatically applied polyester powder coating finish. Luminaire shall be suitable to operate in a temperature range of -10°C to 50°C, LED life should be at least 50,000 burning hours at L70 at 25°C. The lens shall be made of anti-aging & anti UV-PMMA/PC material and able to minimize hot spots & insure proper light distribution. Suitable for outdoor weather proof conditions having IP66 ingress protection. The luminaire shall have system wattage 9W and system lumen output of not less than 680 lumens, Beam angle should be narrow : 180 Degree, The fixture shall have input voltage of 240V AC with integral driver or 24V DC, provided with external high efficiency Driver operating on 240V AC, Power factor >0.90 @ Full Load, internal Surge protection 4KV and other protections including OCP, OVP, SCP, OTP shall be provided in the driver complying to BIS standard \\"IS 10322 ,Color Temperature : 3000K CRI > 70, Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%, LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia, Bridgelux to insure higher lumen output and brightness with SMD/COB LED chips. The successful bidder shall submit the product data sheets, LM80 report issued by LED manufacturer along with the BIS certificate. |
| 212 | Supplying and errecting of LED Flexible Strip light (3000K) with IP67 rating sealed with anti-UV and anti-UV aging silicon material without color shifting. Lumen output 100Lm/W, 75Watt/5Mtr.Universal PCB width for perfect installation with aluminum profile. SMD LED's, CRI80, 3000K, 120LEDS/M, 15W/m, 8.33mm/cut, 24V dc, 8mm white PCB, overall width 10mm after IP rated, Supply voltage 24V DC, PCB Type: 2oz white FPC, OSP, Class III for safety use, Long lifespan 50K hrs. L70B50@25℃ , High density of LED array for dot-free linear lighting performance, better color consistency for visual comfort,. Lead cable (300mm) with suitable numbers of clip, screw, end caps , mounting tracks and waterproof connector. with 3 years warranty with suitable IP67 rated drivers of branded make.. |
| 213 | Supplying & Errcting of aluminium profile sealed with anti-UV and anti-UV aging silicon material, Anodized Finish, extructed aluminium housing, size 1000x16x18 MM, slide diffuser, end caps. Etc. complete. |
| 214 | Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty. |
| 215 | Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 216 | Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 217 | Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 218 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base. |
| 219 | Supplying, Installing, Testing & Commissioning Chandelier, rated voltage 240V AC, 50Hz, Wattage 104W, Recomonded lamp 104W LED optical, Material- Brass, Surface Finish- Gold, Plating Thickness- 0.02 um, Size (LxWxH) - 533x 533x450 mm, Weight- 18Kg, crystal available in Asfour crystal, Ingress Protection (IP)- IP20, protection Class-1 etc complete. |
| 220 | Supplying, Installing, Testing & Commissioning Chandelier, rated voltage 240V AC, 50Hz, Wattage 6*4.5W Max, cap type- 14, Material- Brass/solid glass rod, Surface Finish/Color :- Brass, Plating Thickness- 0.02 um, Size :- D650 * H1320, Weight- 8Kg, No. of Heads :- 6, Crystal :- Available Almaaza in Asfour Crystal, Ingress Protection (IP)- IP20, protection Class-1, Installation Hanging Mount etc complete. |
| 221 | Suplying & Errecing decorative bed side lamp, Rated Voltage 240V, 50 Hz, Wattage 1X40W max., Recommended Bulb 1X7W Led, Base E27, No. Of Head 1, Material Mild Steel and Glass, Surface Finish Nickel finish, Shade Opal Glass, Size (LXWXH) 165X110X270 mm, Fixture Height 270mm Protections Ingress Protection (IP) IP20 Protection Class-I Installation Wall Mounted etc. complete |
| 222 | Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty. |
| 223 | Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/ watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty. |
| 224 | Supplying and erecting LED Mirror Light decorative wall/ceiling mounted fixture including LED upto 12W circular/square type with opaque diffuser and electronic driver including bracket complete. |
| 225 | Supplying, Installing, Testing & Commissioning of high-quality Static White (3000K) Linear Wall Washer in 1000mm having precise beam angle as per design or site requirement suitable for façade lighting applications. Housing to be made of extruded Aluminium alloy with excellent heat management system to ensure proper heat dissipation and thermal stability of the luminaire. The luminaire shall have electrostatically applied polyester powder coating finish. Luminaire shall be suitable to operate in a temperature range of -10°C to 50°C, LED life should be at least 50,000 burning hours at L70 at 25°C. The lens shall be made of anti-aging & anti UV-PMMA/PC material and able to minimize hot spots to insure proper light distribution. Suitable for outdoor weather proof conditions having IP66 ingress protection. Transparent toughened glass having impact resistance protection of IK08. The luminaire shall have system wattage not exceeding 36W and system lumen output of not less than 2750 lumens, Beam angle should be 10x60 /15x45/25 Degree/As per site condition, The fixture shall have input voltage of 24V DC, provided with external high efficiency Driver operating on 240V AC, Power factor >0.90 @ full Load, internal Surge protection 4KV and other protections including OCP, OVP, SCP, OTP shall be provided in the driver. Luminaire complying to BIS standard \\"IS 10322”, Colour Temperature: 3000K, CRI>80, Operating Temperature: -10°C to +50°C, Operating Humidity: 10%-90%, LED Makes should be CREE, LumilLED, Osram, Nichia, Bridgelux to insure higher lumen output and brightness with SMD LED chips. The manufacturer should have internal testing equipment’s especial 2m Integrating Sphere, IPX6, IK10, Humidity Chamber. The manufacturer shall submit the LM79 & LM 80 report along with the supply of material along with the BIS certificate. Similar to model No. DABIN 10H1 |
| 226 | Supplying, Installing, Testing & Commissioning of 4 Way Cree Light 4X3W CL COB SPOT 4D high pressure aluminium die cast 3000 K IP 65 as per approved drawing and design or as approved by the Engineer In charge. Make: REYTEK |
| 227 | Supplying and erecting GEMA Rouund 3W LED Recess Mounted, luminier made up of cast aluminium for better thermal management with mounting clamp, pressure die cast aiuminium ring with reflector and acrylic diffuser for uniform light distribution, integrated with 3W LED, high PF constant current LED driver with surge and thermal protection, cable entries for through wiring of main supply cable, protection class IP-20, suitable for operation on 240V, 50Hz single phase AC supply, 3 Years warrenty etc complete. |
| 228 | Supplying, Installing, Testing & Commissioning PISA WALL LIGHT PROVIDED WITH SUITABLE WATTS LED LAMP, Luminaire made of die cast aluminium frame with non corrosive SS fasteners, Toughened clear Black glass diffuser, Silicon gasket, Cast aluminium base for mounting onto the wall, Surface mounting on wall using hardware after connecting to the power supply, Cable entries for through-wiring of mains supply cable, Integral power supply, Earth connection, Safety class I, Protection class IP 43, CE - Conformity mark, suitable for operation on 240V, 50Hz single phase, AC supply. |
| 229 | Supply Installation Testing & Commissioning of 550 mm Height Decorative laser cut suspended type luminaire fitting, made of Steel pipe and no fabrication from sheet metal is allowed. The luminaire should be with High Pressure Die- Cast Thermal Management for longer life of the LEDs and the IP65 optical compartment. The diffuser shall be clear Toughened Glass. The luminaire needs to have the design as shown in drawing with an bottom opening of 150mm (+/-5%). The system AC wattage of the luminaire shall be 25W (± 10%), colour rendering index CRI >/= 70 and residual flux of 70% (L70) @ 50,000 hours at Ta of 25°C. Colour temperature (CCT) of 3000K. The luminaire shall be suitable for operating within temperature range from - 10°C to + 50°C. The light source should be (Make-Osram /Bridgelux /Nichia /Cree /Lumiled) with Macadam |
| 230 | Supplying and erecting LED Sencer sutaible for Down light up to 18 watt 230 V AC 50 cycles complete erected in position as Engineer In charge |
| 231 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 232 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 233 | Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 234 | Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB |
| 235 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 236 | Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV /trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB |
| 237 | Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 238 | Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB |
| 239 | Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 6 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW SWR/MCCBPB. (Excluding MCCBs) |
| 240 | Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 250A incoming and 6 way outgoing or 400A incoming and 4 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB. |
| 241 | Providing & erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB |
| 242 | Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 200A erected on angle iron /GI frame approved make complete. |
| 243 | Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCPBB |
| 244 | Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates. |
| 245 | Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 246 | Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc. |
| 247 | Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. |
| 248 | Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 249 | Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 250 | Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set of 8) |
| 251 | Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8) |
| 252 | Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB. |
| 253 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 254 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 255 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 256 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 257 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 258 | Supplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 200 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete as per specification no. ESD-SHWS-FPC |
| 259 | Supplying and erecting 40/50 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC |
| 260 | Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater/AC system. |
| 261 | Supplying and erecting All in One LED Solar Street Light fitting of capacity 40-50 watt luminaire, light colour temperature 6000K to 6500K, Min.lumen 6000Lm (>150 Lm per Watt), Ingress protection IP65 and LED life >50000 hours with one no. inbuilt monocrystalline solar panel of min.100 Wp, IP65 rated, life cycle >20 years, working temperature -10°C to +50°C with one no. Rechargeable Lithium Ferro Phosphate (LiFePo4) battery of min. capacity 42 Ah,12.8V with inbuilt BMS module (for accidental short circuit, over discharge, over charge, over temperature protection) designed forlong life and high reliability with operating temperature -20°C to +50°C and life cycle 2000 with driver efficiency >90% suitable to charge lithium cell with necessary accessories complete with 5 years ON SITE warranty. |
| 262 | Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL (For Street Light Pole) |
| 263 | Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on provided foundation as per specification no. OH-PL/OPL |
| 264 | Supplying and erecting Street light bracket for erection of Single fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC |
| 265 | Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FGBKT/BPC |
| 266 | Supplying & erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A, powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up, auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protection on provided iron frame / CC foundation. |
| 267 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 268 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 269 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP |
| 270 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). |
| 271 | Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole). |
| 272 | Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. |
| 273 | Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC |
| 274 | Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 μm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH |
| 275 | Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC |
| 276 | Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC |
| 277 | Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS |
| 278 | Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. |
| 279 | Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP |
| 280 | Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK |
| 281 | Supplying, erecting, testing and commissioning of 3kVA capacity online pure sine wave with backup time of 1/2 hrs. PWM & IGBT based UPS with 0.8 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS |
| 282 | Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete. |
| 283 | Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camera with following features Image Sensor : minimum 1/2.8\\" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR) /Color /Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. |
| 284 | Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1/2.8\\" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Ou × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day/Night-Auto (ICR)/Color /Black & White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. |
| 285 | Supplying, installing, testing & commissioning of 32/40 Ch. Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel Resolution, with HDMI/VGA outputs, provided HDMI output of 4K resolution or VGA output with output up to 1920 × 1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 250Mbps with minimum 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptive Ethernet interface, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specification no. CCTV-NVR |
| 286 | Supplying & erecting 4 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, Maximum sustained transfer rate 150MB/Sec to 180MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 64, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD |
| 287 | Supplying & erecting 43\\" professional LED display with 1920*1080 (Full HD) Display, suitable for 16/32 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON |
| 288 | Supplying and Fixing HD Set Top Box of TATA SKY/ Videcone etc, Approved by Engineer In Charge |
| 289 | REFRIGERATOR : Supplying refrigerator domestic type approved make 47 litres storage capacity , suitable for operation on 230/250 Volts 50 cycles complete with automatic temperature control confirming to IS specification No. 1476/79 with one year guarantee for sealed unit in refrigeration system and marking Sr.No.and date of erection. (Videocon VCP063SH-RDA Single Door 47 Litres Refrigerator) |
| 290 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC |
| 291 | Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete. |
| 292 | Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete. |
| 293 | Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater/AC system. |
| 294 | Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system. |
| 295 | Supplying, erecting, testing and commissioning of diesel generating set confirming to CPCB-IV plus Emission Norms with alternator of 40 kVA output continuous rating, 3 phase, 415 V, 50 Hz, 0.8 p.f., A.C. supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2/G3 and maximum fuel consumption 7.47 ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads, with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 75 ltr etc., on provided M20 grade CC foundation as per specification no. GEN-DG |
| 296 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 297 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 298 | Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 299 | Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 300 | Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP. |
| 301 | Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. |
| 302 | Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 35 kVA up to 40 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. Note 1) In case of new DG set, if AMF/SYNC panel is to be used in lieu of standard panel, reduce rate of Item No 11-2-1 to 11-2-23 by 10% of rate of new AMF panel/SYNC panel. |
| 303 | Providing and erecting 545 to 550 Watt Framed Dual Glass Bi-Fecial Solar Module Panel Having Mechnical Cheracterics of 2272x1133x35 (LxWxT), Weight 333 KG, Front Glass 2 mm Low Iron HTAR semi-tempered glass and Back Glass 2 mm Low Iron Printed semi-tempered glass,Having Electrical Characterics of Vmp of 41-43 Volt DC, Current 13A DC, Juncton Box IP65, MC4 Cable Connector with Sq mm, 500mm Cable including in Panel Junction Box. Bifecial Power output at 30% Rediation 700W, at Module Efficiency of 27% With 5 Years of On-Site Warrenty. |
| 304 | Providing and erecting of Transformerless Solar On Grid String Inverter of suitable Capacity, Having Mechnical Cherecterics of IP65 Rating, 5 to 6 Inch Multi Information LCD Display. Electrical Characterics of 1000V DC Input Voltage, Input Power of 1200W DC, MPPT Voltage Range of 200 to 850V, Startup Voltage of 180V, Nominal Output Power 40KW AC, Output Voltage of 400V, 3Ph, 5 Wire AC(3L/N/PE), Max Output Current of 15A AC, with Powerfactor Adjustable to +0.80 to -0.80. Including all Accessories like ACDB, DCDB, Wiring, Earthing, DC & AC Cables of Appropriate sizes. |
| 305 | Supplying and erecting switch disconnector fuse (SDF) 415V, 100A, with enclosure, four pole AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3 HRC - DIN type fuse switch, insulation voltage 1000 V , with rotary handle for ON / OFF operation (without HRC fuse) |
| 306 | Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 307 | Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs. |
| 308 | Supplying and erecting AC three phase LT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3 x 240V, 50Hz, with backlit LCD display, optical port & RS 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer. |
| 309 | Supplying, installation & marking of surge arrestor/ surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 50 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD |
| 310 | Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI |
| 311 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). |
| 312 | Carrying out core cutting of size 3\\" to 5\\" dia x 15\\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. |
| 313 | Providing Round bottom FIRE Bucket of 9 Litrescapacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook |
| 314 | Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint. |
| 315 | Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall |
| 316 | S u p p l y i n g & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete |
| 317 | Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982 |
| 318 | Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 70 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT |
| 319 | Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT |
| 320 | Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 321 | Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 322 | Supplying and laying (including excavation of suitable width & depth up to 90 cm) 175 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 323 | Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ |
| 324 | Supplying and erecting V cross arm with ISM channel of 75x40x6mm for 11kV HT OH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220mm bent at angle of 60 degree keeping base 305mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts, washers complete as per specification no. OH-PL/VCA |
| 325 | Supplying and erecting 75x40 x6mm with 4.4mm thick web and 7.3mm thick flange channel (top pin) with clamp of suitable length so as to maintain vertical clearance of 1065mm for 11kV, 1320mm for 22kV between insulators for erection of top pin insulators complete as per specification no. OH-PL/VCA |
| 326 | Supplying and erecting bracket for guarding of HT OH Line, made from channel iron 1600mm in length and 75x40x6mm. erected on pole complete as per specification no. OH-PL/VCA |
| 327 | Supplying & erecting inline cut point end pole D. P. Structure for 11/0.415 kV, 63 kVA Transformer with R.S.J. Pole 2 Nos. of size 100 x 116 mm x 11 Mtr. Long with suitable Distribution Box of C.R.C.A. Sheet 16 SWG with 4 Pole MCCB 100 Amps as incomer & 6 Nos. 63 Amps Kitkat /MCCB for outing circuits. Transformer D.P. Structure includes the A. B. Switch 200 Amps, D.O. fuse Set & L.A. Set. 2 Nos. Top channel of size 100 mmx 50 mm for erection of A.B. Switch & 2 Nos. Base channel of size 100 mm x 50 x mm for erecting Transformer. Channel of size 75 x40 mm for erecting D.O. Fuse Set, L.A., A.B. Switch handle etc. Angle of size 50 x 50 x6 mm for erecting Distribution Box, Transformer Belt etc. as per drawing (min. 176 Kg. iron work) with necessary clamps, Nut-bolts. V cross arm, top clip, insulators etc. complete with caution board & barbed wire. D.P. Structure shall be erected in c.c. foundation complete. |
| 328 | Supplying and erecting ACSR conductor of size - 6/1-4.72 mm (Dog) complete. (394.00 kg/km) as per specification No. OH-CON/ACSR |
| 329 | Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI |
| 330 | Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification no. OH-INS/PN |
| 331 | Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6 mm., straining screws, G.l. stay wire 7/8 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. |
| 332 | Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. |
| 333 | Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA |
| 334 | Supplying and erecting C type (half) clamps for pole made from 50x6mm flat for fixing cross arms by means of 15mm bolts and nuts painted with one coat of red oxide and two coats of aluminium paint complete. |
| 335 | Supplying, installing, testing & commissioning of 3 phase, 11/0.433 kV, 50 Hz., 63 kVA, Mineral oil immersed and naturally cooled outdoor type, aluminium wound Non-sealed transformer delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 40℃ by thermometer in oil and 45℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with standard accessories complete with test certificate with losses below 340 Watts at 50% load, 1140 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR NSL. |
| 336 | Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.). |
| 337 | Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles) |
| 338 | Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay). |
| 339 | Providing Electricity Connection from MSEDCL as per electrical load 3 phase commercial load to be use as per Requirement of Resort and MSDCEL Licensoning Charges etc, complete |
| 340 | Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed, preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete. i. Lift upto 1.5 m. |
| 341 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means |
| 342 | Filling in plinth and floors with contractors approved material / murum / stone dust in 15cm. to 20cm. layers including watering and compaction complete. |
| 343 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 344 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 345 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 346 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as perdetailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 347 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curingetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 348 | Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and paintingcomplete. |
| 349 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 350 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 351 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 352 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) |
| 353 | Supplying & erecting four pole ON LOAD change over switch, 415V, 40A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle,operational current category AC23A complying to IS/IEC 60947-3 Part-1/3. |
| 354 | Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 355 | Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. |
| 356 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB |
| 357 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU |
| 358 | Supplying and erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 120 to 475 LPM discharge at 36 to 10 m head & discharge & delivery Pipe of Size-50 mm diameter with a necessary H type clamps as per specification No. WP-SMP |
| 359 | Supplying and erecting minimum Three & above star rated submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s. A.C. supply, having delivery head from 27 to 9 m and discharge from 300 to 660 litres. per minute & pipe of Suction 65mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification No. WP-OSP |
| 360 | Supplying & erecting flat flexible 3 core 6 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 361 | Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc . |
| 362 | Supplying and erecting non return valve 50 mm dia in position made of gun metal complete. |
| 363 | Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP. |
| 364 | Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected to jet /submersible pump with required material complete. |
| 365 | Supplying, erecting, testing and commissioning of 15 KW DC Electric Vehicle Charger (suitable for 4 wheeler)having minimum IK08 & IP54 protection suitable for three phase 415V AC 50Hz incoming supply and 1 no. output charger interface GB/T with 40-100VDC supply and 15 kW capacity, interlocking arrangement with minimum 5 meter charging cable length , 7\\" LCD touch screen for human interface & LED light for status indication, metering for measurement of consumed energy having metering accuracy +/-1%, One hour battery backup for communication, emergency push stop button. User interface by mobile application/QR Code/RIFD Card/Password Login with payment options and having short circuit, over & under voltage, surge protection, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification |
| 366 | Providing and Erecting Active LED Wall, Size:-12.60 x 9.45ft, Pixel Pitch: 6, Brightness 7500nits, Cabinet Size: 1280x960, Resolution of cabinet: 192x144, No of cabinet:3x3, total:119.05sqft, Diagonal 189, Average hourly consumption of 2.8 units. Model-AS6 V2 |
| 367 | Providing and Erecting All-in-one LED video processor and controller Inputs: HDMI 1.3, Single Link DVI, 3G-SDI, Light Sensor Port, Outputs: HDMI 1.3 (Loop), HDMI (PVW / MVR), Single Link DVI (Loop), 3G-SDI (Loop), Max pixels per LED out (port): 650,000 pixels, Total pixels: 2.6 million pixels, Control options: Ethernet, USB, It integrates video processing and control. It's capable of receiving a variety of video signals and processing high-resolution images. Model -VX400 |
| 368 | To supply and install the LED wall structure, including frame fabrication, panel mounting, electrical setup, cable management, and final testing with alignment and calibration. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender